Trending December 2023 # 3 Ways To Make Lanyards # Suggested January 2024 # Top 19 Popular

You are reading the article 3 Ways To Make Lanyards updated in December 2023 on the website Kientrucdochoi.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 3 Ways To Make Lanyards

Thinner gimp and boondoggle laces will yield more length in the final product.

Using two different colors will be easier at first while you’re learning the crown sinnet method.

Find the center of each strand. All you need to do to find the centers is fold the strands in half until the ends are even. Then hold your thumb and finger around the centers so you don’t forget where they are.

Overlay the two strand centers. Lay the two centers over each other on the top of your working station, arranging the strands in a plus sign.

Fold up two loops with the bottom strand. Holding one finger down on the center for the entire first stitch so that the two strands stay where they are, use your other hand to grab one end of the bottom strand. Draw it up over the center, creating a large loop. Grab the other end of the bottom strand and do the same thing.

Do not cross the strands as you draw up the loops; just make sure they both loop over the finger that’s holding down the center.

Weave one end of the top strand through the loops. Grab one of the ends of the top strand, draw it toward the center, and simply weave it over the first loop it encounters but under the second loop.

Your two ends for the top strand should now be facing the same direction.

Weave the other end of the top strand through the loops. Grab the other end of the top strand, draw it toward the center, and simply weave it over the first loop it encounters but under the second loop.

Make sure the strand you’re weaving isn’t the one you just weaved through a loop and draw it toward the center.

Note that the loop your second top strand went under is the loop your first top strand went over.

Re-place your finger on top of your first stitch. Remove your finger from the center and place it on top of the first stitch (the two weaves you just completed). Use your finger to steady the center while you tighten the stitch.

Tighten the stitch. With your free hand (the one not holding down the stitch), gently tug on each strand in succession to tighten the stitch. You might have to go around a few times to get it tight enough.

Begin your next stitch. Repeat what you did for the first stitch: using the same color that was the bottom strand during the first stitch, draw up two non-crossing loops again. Then, with one end of the top strand, go over the first loop and under the second one; repeat this with the other end of the top strand. Tug the strands to tighten the stitch.

Repeat the loop/weave/tighten process. You will continue this same process until until you almost run out of lace. Stop before you run out completely, because you may need to make a final stitch to secure the end.

Finish your lanyard. How you finish the lanyard will depend on what material you’re using.

If you’re using a thread-based material, such as craft lace, simply cut the ends close to the lanyard and burn them with a match or secure them with crazy glue.

If you’re using gimp or boondoggle material, you’ll need to do a finishing “stitch.” Loosen the loops of your last stitch a bit first. Then take one of your strands and pull it through the loop of the other strand of the same color, going under the same-color strand as well as the different-colored strand beneath it. Finally, pull your strand up through the center of the lanyard. Repeat this for all four strands, pulling each strand tight when they’re all through, and then trim the strands to your desired length.

You're reading 3 Ways To Make Lanyards

3 Ways To Make Your Own Animation

Color — Knowing which colors pair well and which combinations to avoid will help you create a more pleasant animation (or, if you’re going for dissonant imagery, create a distressing animation).

Composition — This refers to knowing how to fill the screen with your animation in an efficient, aesthetically pleasing manner.

Perspective — Knowing how to demonstrate the dimensions of an image will deepen your animation.

Anatomy — Proper understanding of anatomy can help you create structurally accurate animations. It can also help you figure out which anatomical rules you can break while maintaining a believable animation.

Script your animation. First, write down everything that you want to happen. This doesn’t just mean dialogue; you should include actions and facial expressions as well. You need to have a clear idea of exactly what’s going to happen before you start.

Draw some character sheets or make character models. What your characters will look like is also a crucial aspect of your animation film. You’ll want to have a reference to look at as you draw your frames so that the character looks consistent and real from pose to pose. Draw your characters from every different angle and with a number of different expressions. You should also draw out what they’ll be wearing, especially if what they’re wearing changes between scenes.

Make your animation sketch. This is a single drawing on a single piece of paper that shows all of the major stages of movement in a single frame. This will often result in a picture that looks like conjoined quintuplets, but it’s designed to make sure that your key frames are correctly aligned and that your motions look natural.

Try using squash and stretch. Squash and stretch is when you exaggerate motions to help the human brain perceive them as real. A common example would be when you imagine a ball. It’s much more interesting to see a ball squish down to the floor a little when it lands, instead of just seeing a normal sphere. This helps the viewer feel the motion that the ball is making.

Implementing subtle facial expressions—eyebrow movement, twitching of the corner of the mouth, and even eye (specifically pupil) movement—along with body language (e.g., standing up straight versus loosening up) will convey adequately a wide range of character emotions.

For example, if a character transitions from surprised to angry, they might start with raised eyebrows, wide eyes, and an open mouth and then transition to having a frown, narrow eyes, and bared teeth.

Draw the key frames. The key frames are the major stations of the movement that the character makes. For example, if you’re animating a character turning from left to right, the key frames would show the character facing left, then the character facing the camera, and then the character facing right.

It’s a good idea to check for flow any time you finish making a change to your document.

You’ll want to check for flow again after doing this.

Clean up the drawings. Clean any sketch lines and stray marks that distract from the movement of the character. You may even choose to ink the frames of animation, depending on what you plan to do with your work.

3 Ways To Make Branded Content And Influencer Marketing Work Together

When influencer marketing and branded content work together, both sides benefit in the end

The first group champions influencer marketing’s ability to give a brand street cred with third-party associations. As little as people sometimes trust brands, an endorsement from an influencer can go a long way toward building audience trust, and for niche audiences and micro-influencers, the effect is even more pronounced.

Download our Individual Member Resource – Influencer outreach guide for marketing professionals

This practical guide shows you how to use tools to find and interact with influencers on the best social media platforms for outreach, that’s Twitter, LinkedIn, Facebook and more.

Access the Influencer outreach guide for marketing professionals

But in the heat of competing philosophies, both sides have overlooked something important: Both branded content and influencer marketing are effective tactics, but they’re even more effective when used together. If digital marketers set aside their differences and look at their goals, they may finally understand that a blended approach is the best strategy.

Strength in marketing unity

By using influencer marketing and branded content together, brands can ensure the content they want to share reaches audiences through trusted influencers. That means no more worrying about the effectiveness of the message and no more concern over the trustworthiness of the speaker. The brand curates the communication, the influencer delivers through an impactful channel and the brand comes off as more relevant and worthwhile than ever.

3 ways to blend branded content and influencer marketing

1. Fold an influencer campaign into a larger branding strategy

Look for influencers who can work within the wider context of the brand’s objectives, not just influencers who know how to hawk a certain product. This is not an easy process, but it is a necessary one. Only influencers with audiences that match the brand’s target buyer personas should make the cut.

2. Use different influencers for the same branded content

Who made the rule that influencers and branded content had to be paired for life? Single-influencer campaigns can be effective, but brands can spread their influence further by partnering with multiple voices inside the same niche. The point of this practice is to make users feel like the brand is plugged into the community and relevant to the people within it.

For example, Shopee Indonesia once worked with 200 influencers at once to promote a limited-time sale. That may be a bit much for branded content in most cases, but the theory remains sound. Identify the market to address, then work with a platoon of influencers to make the most of the engagement opportunity.

3. Give influencers creative freedom with branded content

Lovers of branded content just cried foul, but they shouldn’t worry. This is not about handing off the brand’s image to strangers. Rather, it is about allowing featured influencers to tell the stories they are so good at telling and placing the brand at the center of the tale.

When tech company Lenovo wanted to promote a new tablet computer, it didn’t hand every influencer a script. Instead, the company distributed products to popular influencers and asked them to spend (and film) their time with the new devices. Mommy blogger Kileen, for instance, wrote a blog post showcasing how Lenovo’s Yoga 3 Pro helped her fulfill her “modern mom” duties. Because this is what her blog centers around, the content felt authentic, and at the end of the post, she gave her followers the chance to win their own Yoga 3 Pro by promoting a giveaway contest.

Final thoughts

3 Easy Ways To Upload High

Instagram is one of the most popular social media platforms available today, and it isn’t always just for personal pictures or fan accounts.

However, this can sometimes be hard to achieve, and it’s extremely frustrating when a picture that looks great on your phone comes out blurry on Instagram.

Why Are My Instagram Photos Low-quality?

Whether you feel like your photos randomly come out low quality or if it’s happening to everything you upload, there’s actually a very specific reason that a photo looks low quality on Instagram but high quality on your computer or phone—Instagram compresses photos above certain dimensions.

This means that your photo is being forcefully resized to fit their standards, which doesn’t always have flattering outcomes.

This happens no matter what you use to upload the photo, be it your phone or computer, so it’s unavoidable unless you stick to certain principles.

3 Ways to Upload High-quality Photos to Instagram

There are a few different ways you can avoid having your photos compressed by Instagram. Here’s how to do it.

1. Understand Instagram’s Requirements

If you keep your photos within Instagram’s constraints, then you can control the quality and not worry about them being force resized by the app.

These are the guidelines released by Instagram for uploading photos:

Use the most recent version of the Instagram app.

Upload a photo with an aspect ratio between 1.91:1 and 4:5.

Upload a photo with a maximum width of 1080 pixels and a minimum width of 320 pixels.

Any photo wider than 1080 pixels will be compressed, and you will lose detail. Photos smaller than 320 pixels wide will be enlarged, which will also produce blurriness.

Any photo that doesn’t meet the aspect ratio requirements will be cropped to acceptable dimensions.

2. Fix Relevant Settings

Some users have reported that on iPhone, you may be unintentionally compressing your photo before uploading it to Instagram due to a specific setting, particularly if you use iCloud as your primary data backup solution.

To fix this, open your iPhone’s settings and go to “Camera & Photos”. Then (if the option is available), uncheck “Optimize iPhone Storage”.

Photo from Apple

Additionally, if you use an online backup service like Dropbox or Google Drive, check if the photos are not being compressed by these services as well.

3. Resize Your Photos Ahead of Time

If you already know your photo is not going to be an acceptable size, you can resize it ahead of time and retain the quality.

For instance, photos from a DSLR camera are almost certainly going to be higher quality than allowed on Instagram, so you should import them to software like Photoshop, Lightroom, or GIMP (free) and resize them by yourself before uploading.

If you use Lightroom, you can set up a custom export setting that will make sure your photos never exceed 1080 px.

For portrait photos, choose “Resize to fit: Short Edge” and set the pixels to 1080.

For landscape photos, choose “Resize to fit: Long Edge” and set the pixels to 1080 here as well.

Conclusion

Whether you’re a professional with a brand to market, an aspiring influencer, or just a regular Instagram user, the rules of uploading photos are the same for everyone.

Just make sure to stick to Instagram’s strict pixels requirements and you shouldn’t see any unexpected changes in your photos. It may require a little extra work on your end, but the results will show a clear difference.

How To Convert Mbr To Gpt In 3 Simple Ways

How to Convert MBR to GPT

While Windows does offer a native solution to switch between MBR and GPT, you have to delete all data from the disk to be able to use it. Luckily, we do have ways to do this without data loss, and today, I’ll show you exactly how to. So without further ado, let’s take a look at how to convert the disk partition style in your PC from MBR to GPT. But before that, we’ll also take a look at what is MBR and what is GPT, and how they affect the way you use your computer.

What is GPT and MBR?

MBR (Master Boot Record) and GPT (GUID Partition Table) are two different partition styles for hard disks, and both are widely used for disk partition management in Windows computers. The latter is the relatively new technology and is slowly replacing the legacy one because it’s faster, more secured and can natively address larger storage disks. While MBR disks use the standard BIOS partition table, GPT disks use UEFI.

How is GPT Better Than MBR? What to Remember While Converting From MBR to GPT or Vice Versa

If you want to convert the boot disk in your PC from MBR to GPT, make sure your motherboard supports UEFI. That’s because motherboards with legacy BIOS don’t support GPT partition as boot drive.

Another important point to note is that while there are multiple free and paid utilities that help you convert from MBR to GPT, most of the free methods to convert between the two formats will result in data loss. However, there are one or two ways to get it done for free without losing data, and today we will show you exactly how to do that.

Method 1: Convert MBR to GPT Using Disk Management (Data Loss)

Note: Backup all your data before using this method.

Method 2: Convert MBR to GPT Using DiskPart (Data Loss)

Note: Backup all your data before using this method.

Open Command Prompt as Admin. (Search ‘cmd’ in the Windows search bar and below the Command Prompt option, select ‘Run as Administrator’).

In the command prompt window, type in ‘diskpart’ (without quotes) and press Enter. Next, type in ‘list disk’ and press Enter.

From the disks listed by the utility, select the disk you want to convert using the ‘select disk X’ command, where ‘X’ is the number assigned to the disk you want to convert. Now delete all data from your chosen disk by running the ‘clean’ command. You’ll get a message saying “DiskPart succeeded in cleaning the disk”.

Finally, type in ‘convert GPT’ and press Enter. Wait a few seconds for the command to be executed. You’ll have successfully converted the disk from MBR to GPT.

Note: Running the clean command will delete all partitions or volumes on the disk.

Method 3: Convert MBR to GPT Using Gptgen Without Data Loss

First off, download and install an utility called ‘gptgn’ (Free). Remember the installation directory.

Run the ‘list disk’ command as described earlier. To convert the partition table of your target disk from MBR into GPT, type-in the command: ‘gptgen.exe -w \.\physicaldriveX‘ (without quotes) and press Enter (Note that ‘X’ denotes the disk you want to convert).

Once the command is executed, you will successfully convert MBR to GPT without data loss. You might get a warning saying that there’s no guarantee of successful conversion, but select the option to proceed anyways.

Other Methods to Convert MBR to GPT Without Data Loss

If the above processes seem too cumbersome, you can use other, more user-friendly ways to convert your disks from MBR to GPT. All major disk partition software, including Easus Partion Master, AOMEI Partition Assistant, MiniTool Partition Wizard and others, offer you the ability to convert MBR to GPT without losing data, but not with the free version. So if you’re willing to pay up, they might be the easiest way to switch between the two without data loss.

Frequently Asked Questions Q. How Do I Convert MBR to GPT Using Rufus?

Rufus is a software that helps format and create bootable USB flash drives, such as USB keys/pen-drives, memory sticks, etc. You can also use it to assign partition style during the setup process.

Q. How Do I Boot Into UEFI mode?

Q. Is NTFS MBR or GPT? Q. Is GPT or MBR Better?

Q. Can Windows 10 Install on MBR Partition?

Yes, it can. However, MBR comes with some inherent shortcomings that you need to remember before installing Windows 10 on an MBR disk. We’ve discussed those in detail earlier in this article.

Q. Will Converting to GPT Delete Data?

There are both lossy and lossless ways to switch between the two file systems, and we’ve discussed both in this tutorial.

Q. How Can I Convert C: Drive to GPT?

To convert your computer’s current boot drive from MBR to GPT, you’ll need to employ one of the lossless methods. You can use either third-party utilities like GTPGN or the paid version of commercial programs like, Easus Partion Master.

Q. How Do I Know if a Disk Partition is GPT or MBR? Q. Does My Laptop Support GPT?

As mentioned earlier, whether your device supports GPT or MBR depends on whether it runs UEFI or legacy BIOS. To check which type of motherboard firmware your PC uses, follow the instructions in our detailed article on this subject.

Q. How Do I Make my SSD GPT?

You can follow the methods described in the tutorial above to convert your SSD partition layout to GPT. They work for both SSDs and mechanical hard drives.

Q. Can You Use GPT Without UEFI?

No, you can’t. GPT was introduced as part of the UEFI initiative. So to use it, the motherboard must support UEFI. If your motherboard does not support UEFI, you can’t use GPT partitioning style on the hard disk.

Q. How Do I Get Rid of GPT Partition?

You can convert GPT partitions to MBR much the same way you convert MBR to GPT. You can change the partition style as long as the disk is empty and contains no volumes. Before conversion, backup all data on it and close any programs that are accessing the disk.

Convert MBR to GPT Without Data Loss

While all three methods detailed above will help you convert your disk from MBR to GPT, the third one will do so without any data loss – and for free. So in case you’re searching for ways to covert your storage disk(s) from MBR to GPT, try out one of the above methods and let us know how that went.

3 Quick Ways To Fix Error A101 On Zelle

3 Quick Ways To Fix Error A101 On Zelle The A101 error on Zelle occurs if your connection is not trusted

389

Zelle error A101 can occur because of a corrupted app installation, a changed mobile number, or a moved SIM card.

Some users may be able to fix Zelle account error A101 by changing to a mobile data connection.

Reinstalling Zelle also resolved the error A101 for some of our readers so you should try it out.

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

readers this month.

Zelle is a mobile finance app for making electronic fund transfers that’s usually reliable. However, some users see this error on Zelle when they try to log in or make transfers with it: An error has occurred. (A101).

If you’re seeing the same A101 Zelle error on your mobile device, then try applying the potential resolutions for that issue in this guide.

Why is my Zelle saying an error has occurred?

The A101 often error means that Zelle doesn’t trust or can’t verify your device. Such an issue can arise when you start using a different phone number than the one registered with Zelle.

However, that’s not the only reason this issue can occur. Here are some other potential causes for error A101:

Moving your phone’s SIM card into a different slot – This action may lead to an error on Zelle.

A faulty Zelle app installation – Apps can become corrupted and Zelle makes no exception.

Zelle app security measures for Wi-Fi connectivity – If you log in from a public Wi-Fi, the Zelle app can block itself.

Not verifying your email address with Zelle – This error may also occur if your email address is not verified within your Zelle account.

Now that we know the potential issues that may cause this issue, let’s see how we can fix this error quickly.

How do I fix error Zelle A101?

Before getting into any tweaking, there are some basic actions we can perform and get out of the way:

Make sure that you have steady data or Wi-Fi connectivity.

If you’re relying on Wi-Fi, connect to a trusted hotspot instead of a public one.

Verify your email address with Zelle.

Close all the apps, including Zelle, and open Zelle again.

Log out of the app and log back in.

If you checked all these prerequisite methods, let’s see how we can fix this problem quickly.

1. Use the mobile data connection

Make sure the Zelle app is closed on your mobile.

Swipe down from the top of your mobile device.

Disable Wi-Fi by tapping it.

Go to Settings, on your mobile, tap Connections, go to Data usage, and toggle on the Mobile data option.

Expert tip:

However, you may also protect your privacy by using a VPN for mobile data on your device.

2. Reinstall the Zelle app

The above steps are for reinstalling Zelle on Android devices. You can apply the same resolution on iOS devices, but the specific steps will be slightly different.

3. Insert your mobile’s SIM card into an alternative slot

NOTE

This solution is recommended if you’ve moved the SIM card into a different slot after registering it with Zelle.

Different banks that offer Zelle have variable sending limits. You’ll need to contact a bank to check what its transfer limits are for Zelle.

If your bank doesn’t offer Zelle, the sending limit for each week will be $500. That’s a fixed limit users can’t request to increase or decrease.

Those quick fixes for Zelle’s error A101 are worth a try. It’s also recommended to check your linked bank card hasn’t expired and that its billing address matches up with the one input for the Zelle app.

If those solutions aren’t sufficient, try reinstalling the app and creating a new Zelle account. You can also contact Zelle’s customer support by filling out the email form on this Contact Us page.

Still experiencing issues?

Was this page helpful?

Start a conversation

Update the detailed information about 3 Ways To Make Lanyards on the Kientrucdochoi.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!