Trending December 2023 # Fix: Can’t Update Spyware Protection On Windows 10/11/7 # Suggested January 2024 # Top 18 Popular

You are reading the article Fix: Can’t Update Spyware Protection On Windows 10/11/7 updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: Can’t Update Spyware Protection On Windows 10/11/7

FIX: Can’t update spyware protection on Windows 10/11/7






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

In order to address this, we provided the list of the most viable solutions. If you’re not seeing any definition updates for Windows Defender, move gradually through the list.

1. Check for updates

All chances are that you already tried this. As you already know, the Defender’s updates for virus and spyware protection come via Windows Update. However, as we already saw so many times before, these updates tend to misbehave. In order to surpass the automatic distribution (which is obviously failing in this case), you can navigate to Windows Defender Security Center and check for updates by hand.

Follow these steps to update Windows Defender via Security Center:

Open Windows Defender Security Center from the Notification area.

Choose Virus & threat protection.

Open Virus & threat protection updates.

If the error is persistent, follow the additional steps we provided below.

2. Make sure there’s no a third-party antivirus installed

Now, you already know that there’s no place for two antimalware solutions on Windows 10. Or any Windows iteration, for that matter. If you decide to place your trust in a third-party antivirus, Windows Defender will be disabled automatically. Now, if you, in the meantime, decide to use Windows Defender instead, it’s really important to delete all traces of the third-party antivirus which preceded it.

READ ALSO: Best Antivirus software to use in 2023 for your Windows 10 PC

So, a thorough clean up is necessary in order for Windows Defender to work without any issues. You can navigate around and clean the associated files on your own, or use a third-party tool which will do it for you. There’s a huge list of available Uninstallers and Cleaners, so we recommend checking our list of the best available tools.

These tools will clear all remaining files and, after a restart, Windows Defender should work fine. However, if that’s not the case, there are a few more things you can do.

3. Restart services

Restarting the dedicated service for Security Center might help, as well. If Windows Defender is active, this service should automatically start with the system. However, due to a minor bug, certain system services tend to stop. Also, by restarting the service at hand, you’ll restart the system application, and this just might get Windows Defender going.

Here’s where to find the service and how to restart it:

Type services in the Windows Search bar, and open Services from the list of results.

Navigate to “Security Center” service and make sure it’s running.

4. Run SFC

When the built-in system resources start failing, the troubleshooting steps we commonly use on third-party applications are out of the reach. What we can do instead is employing the built-in tools. One commonly-used tool for addressing system errors is System File Checker also known as SFC. This tool runs through a command line and it verifies the integrity of system files.

Here’s how to run SFC in Windows 10:

In the command-line, type sfc/scannow and press Enter.

Wait until the procedure ends and restart your PC.

Try updating Windows Defender’s virus and spyware definition again.

5. Use CMD to enforce the updates

Expert tip:

Follow these steps to enforce Windows Defender updates with Command Prompt:

In the command-line, copy-paste the following lines and press Enter:

MpCmdRun.exe -SignatureUpdate

After that, press Enter again to update signatures and restart your PC.

6. Check Group Policy

As we already said, when you install a third-party antivirus, Windows Defender automatically disables. The system will see to it. However, if you’ve changed your mind, getting back to Windows Defender can, for some users, be quite a chore. Namely, in order to re-establish Windows Defender, you’ll need to confirm that the feature is enabled in the Group Policy Editor.

Here’s what you’ll need to do:

Type group policy in Windows Search, and open “Edit group policy“.

Navigate to: Computer Configuration/Administrative Templates/Windows Components/Windows Defender Antivirus.

Make sure the “Turn off Windows Defender Antivirus” is disabled or not configured.

If you can’t access the GPE, there’s still a way to re-enable Windows Defender. You can navigate to Registry Editor and make some needed changes. However, please do be careful, as these are the risky grounds and a misuse can lead to critical system damage.

Follow these steps to tweak Defender-related Registry settings:

Navigate to: HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows Defender.

Change its value to 0 (zero) and exit Registry Editor.

7. Download updates manually

If the issue is persistent and Windows just won’t comply, you can try to update the virus and spyware database manually. Namely, all latest definitions are stored online, on a dedicated website. You can navigate there and download fitting definition updates, depending on your OS version (Windows 10 or Windows 8/8.1) and the system architecture.

Follow these steps to install updates for Windows Defender manually:

Navigate to the official site with definition updates, here.

Scroll down and download the proper version suiting your system’s version and architecture.

Install it like any other application and restart your PC.

8. Reset PC to factory values

Finally, if you’re still unable to resolve the issue at hand after all previous steps, we suggest restoring Windows to its default values. This is much better than the reinstallation, as you get to keep your files. This is more of a refresh for the system and it’s a viable last resort if system features are giving you a hard time.

Follow these steps to reset your PC to factory settings:

Press Windows key + I to open



Update & Security.



Choose to

keep the files and continue with the resetting procedure.

That’s it. We hope this was an informative read and that you’re now able to update Windows Defender without issues. You need that definition up-to-date at all the times, so it’s quite dangerous to neglect it.


Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

You're reading Fix: Can’t Update Spyware Protection On Windows 10/11/7

0X80248007 Windows Update Error On Windows 11

0x80248007 Windows Update Error on Windows 11 [Fix] Note that corrupt system files may cause this error






Repair all Windows Updates Errors with Fortect:

Windows update failures can be annoying! With Fortect, you will get rid of errors caused by missing or corrupted files after an update. The utility maintains a repository of the original Windows system file versions, and it uses a reverse algorithm to swap out the damaged ones for good ones.

Download Fortect and install it on your PC

Start the tool’s scanning process to look for corrupt files that are the source of the issues

Fortect has been downloaded by


readers this month.

Microsoft releases updates for the Windows operating system and other components like drivers to improve performance and resolve bugs affecting them. Users can download and install these updates on their devices by updating their OS.

However, the process can encounter issues, resulting in the error code 0x80248007 and other errors. Also, you may be interested in the Windows Update Error 0x80073701 and ways to fix it.

What causes the error code 0x80248007?

The error code 0x80248007 on Windows is an update error that occurs when there’s an interference with the download process. Some factors that may be responsible for the error are:

Buggy or missing update packages – When the update you’re trying to install is buggy or corrupt, it can cause your system to run into errors during the process. Also, an essential component may be missing in the update package, causing issues with the update process.

Issues with Windows update services – The error can occur due to issues with Windows Update services not running correctly on your device. The services involved may have a pending process running, causing it not to interact with the needed components.

Unidentified Microsoft Software License Terms – You can run into the error when the update cannot find the Microsoft Software License Terms. It makes it impossible for the update to identify the necessary documents needed for the update process.

Corrupt system files – Corrupt system files can cause the update download error to occur on your computer. They impede the smooth installation process.

How can I fix the error code 0x80248007?

Fix network congestion on your PC.

Temporarily disable antivirus software.

Restart Windows in Safe Mode and check if the error code 0x80248007 persists.

If you can’t fix the error, proceed with the following solutions.

Resetting the Windows update process helps fix problems causing the Windows update services not to download updates.

The troubleshooter will find and repair issues causing the Windows update error code 0x80248007 on your PC.

If you can’t use the steps above, check other ways to run the Windows Update troubleshooter in Windows 11.

3. Verify that the Windows Installer is running

Expert tip:

Disabling Windows Update services and clearing the distribution directory will clear the cache file.

The above steps will help verify and fix issues with Windows Update Service and the Background Intelligent Transfer Service if they aren’t working.

6. Run an SFC scan

An SFC scan will find and repair corrupt system files prompting the error code 0x80248007. You can check how to fix the run-as-administrator option if it’s not working on your PC.

Another simple but more efficient option to repair corrupt files is a specialized tool, such as Fortect, that can perform this task automatically by detecting malfunctioning files and instantly replacing them with brand-new ones.

⇒ Get Fortect

7. Disable Windows Firewall

Disabling the Windows Defender Firewall will fix any problems the firewall is causing in the Windows update process.

8. Run System Restore

System Restore backdates your PC to the Restore Point and fixes issues affecting it. Check how to fix Restore Point if it’s not working and if you have any issues running it.

Conclusively, our readers can check our article for fixing slow Windows updates on Windows 11. Also, we have a detailed guide on Windows Update error 0x8007045b and some fixes.

Still experiencing issues?

Was this page helpful?


Start a conversation

7 Big Ways Windows 11 Changes Windows 10

How is Windows 11 different than Windows 10? Our hands-on look at a leaked early build of Windows 11 begins to answer that question.

Our leaked build shows changes in the Windows taskbar and Start menu, leveraging the UI tweaks that Microsoft made to Windows 10X before it put that operating system on ice earlier this year. There’s also a massive Widgets drawer that’s entirely new, though we’d expect it to evolve between now and when Microsoft will likely launch Windows 11 in the fall.

Microsoft may certainly add or subtract features to Windows 11 between now and its launch. But for now, here are the major changes to Windows 11 from the perspective of a Windows 10 user. For a more thorough look, check out our video tour of Windows 11 in the video embedded just below.

The Start menu: simple icons, no Live Tiles

Mark Hachman / IDG

The Windows 11 Start menu.

More profound changes appear once you’ve opened the Start menu itself. In Windows 10, Live Tiles allow app developers to cycle through photos and provide dynamic information to you. That’s all gone. Again, Microsoft is taking its cues from Windows 10X and providing an array of small, static icons. Below, a list of “recommended” files appear to be shortcuts to either frequently-used files, or at least recent documents you may have opened. Small buttons (“All apps,” for example) offer shortcuts to any other apps that may be hidden away.

The Start menu may not be as friendly as in in years past, but it’s more functional than ever.

Windows Snap has been enhanced with FancyZones 

Mark Hachman / IDG

Windows 11 appears like it’s implemented FancyZones right in the operating system.

On a window within Windows 11, hovering your cursor over the “maximize window” icon in the upper right-hand-corner of a window does more than just fill the screen with the selected window. It allows you to select from a variety of configurations to organize that window, from a “four corners” orientation to a narrow strip along one corner of the screen. It’s very reminiscent of the ”FancyZones” portion of the Power Tools suite which Microsoft implemented on 2023. All you need to do is highlight which windows configuration you want, then select one of the available alignments for your selected window.

A simplified Taskbar

Mark Hachman / IDG

A closeup of the Windows 11 taskbar.

Bye-bye, Cortana

Yes, bye-bye Cortana—well, from the Windows 11 Taskbar, anyway. One of the ways in which Microsoft has slimmed down the Windows 11 taskbar has been to fold the Search bar into a simple search icon, and to do away with the Cortana icon entirely. Cortana lives on as an app within Windows 11, but you’ll have to manually launch the Cortana app, then interact with its limited functionality. Cortana has improved from when she didn’t know the answer to 2+2, but she’s still limited in her functionality.

What in the world is Widgets?

Mark Hachman / IDG

We’re not sure what Widgets will end up as, but for right now it’s a showcase for News & Interests within Windows 11.

New icons and other UI tweaks

Mark Hachman / IDG

Some of the new icons within Windows 11.

No changes to apps 

So far, what we haven’t noticed are any changes to the traditional app model: no limits on 32-bit versus 64-bit apps, and nothing locking you to apps within the Microsoft store. Again, the leaked version of Windows 11 seems to be a visual reskin of Windows 10, implying that you’ll be able to do the same things with Windows 11 that you’d be able to do with Windows 10.

How To Fix Arduino Problems On Windows 10/11

How to fix Arduino problems on Windows 10/11




Arduino is an open-source electronics platform that anyone can use.

You need to program it via connectivity to a PC. However, issues with Windows 10 are not uncommon at this phase.

To read more about this amazing tool, check out our dedicated Arduino Errors page.

If you need more general troubleshooting guides, check out our Windows 10 Fix page.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Arduino is similar to Raspberry Pi in a way, but users reported problems with Arduino on Windows 10, so today we’re going to show you how to fix problems with your Arduino on Windows 10.

Steps to fix Arduino issues on Windows 10

In most cases, you can quickly fix Windows 10 Arduino bugs by installing the latest drivers manually. If this method fails to fix your issues, try using compatibility mode.

Now, if the issue persists, just follow the instructions listed below and we’re sure one of these solutions will help you fix the technical glitches you’re experiencing.

1. Run IDE as Administrator

Users reported Serial port ‘COM4’ already in use try quitting any programs that may be using it error message on their Windows 10 PC.

Arduino comes with its own IDE tool that allows you to program it, but it seems that users are unable to start the IDE due to this error.

If running the IDE as administrator fixes the problem you’ll have to use this method every time you want to start the application.

If you want, you can set the application to always run with administrative privileges by following these steps:

After running Arduino IDE as an administrator, the problem should be completely resolved.

2. Install the driver manually

Users reported that they can’t connect to Arduino with IDE, and that can be a major problem. In order to fix this issue, you need to install Arduino drivers manually, and you can do that by following these steps:

When Device Manager opens, locate the Arduino device that doesn’t have its driver installed.

Few users reported that they are unable to install the driver because it’s unsigned. This is a security measure by Windows designed to protect you from potentially malicious drivers.

By using this feature you can only install drivers that are digitally signed and genuine to your PC. Unfortunately, few users reported that this feature caused the problem with Arduino drivers.

If you can’t install Arduino drivers on your Windows 10 PC we recommend that you turn off driver signature enforcement feature by following these steps:

You’ll see three options available on the screen. Choose Troubleshoot.

When your computer restarts you’ll see a list of options available on the screen. Press F7 or 7 on your keyboard to select Disable driver signature enforcement option.

Now Windows 10 will start normally and you’ll be able to install unsigned drivers without any problems.

You might encounter a warning while trying to install an unsigned driver, but you’ll still be able to install Arduino driver without any problems.

3. Change your date

Few users reported issues while installing Arduino drivers on their system, and it seems that the problem was caused by an expired certificate.

This can prevent the driver from being installed, but you should be able to fix the problem simply by changing your date.

To do that on Windows 10, follow these steps:

After your date is changed try to install the driver again.

After you install the driver, go to Date and time window again and set the correct date. You can also turn on Set time automatically and Set time zone automatically options.

4. Connect the device to a different PC

According to users, if Windows 10 can’t recognize your Arduino you might want to connect it to a different PC that runs an older version of Windows. Users reported that their device was recognized after connecting it to a different PC.

After finding the Arduino model, they were able to download the driver and install the device on their Windows 10 PC.

5. Install the necessary certificates

If you can’t install Arduino drivers on your Windows 10 PC, you might have a problem with driver certificates. You can easily fix that by installing the necessary certificates on your PC. To do that, you need to follow these steps:

Open Arduino/drivers directory.

After the certificate is installed you should be able to install Arduino drivers without any problems.

6. Reinstall Arduino drivers

Expert tip:

Apparently, this issue is caused by your drivers, and one of the simplest ways to fix this problem is to reinstall your drivers. To do that, follow these steps:

Open Device Manager.

After the driver is removed, restart your PC.

After deleting the driver, simply download the latest version of the driver and install it on your PC. By doing that all driver-related issues with Arduino will be resolved.

7. Check if the proper board is selected

According to users, you can get Can’t open device error message if you don’t select the proper board from Arduino IDE. To avoid this problem be sure to go to Tools section and select the appropriate board.

8. Turn on/off Compatibility mode

Users reported No serial port name defined error message in Arduino IDE, and according to them, this issue is caused by Compatibility mode.

This feature is extremely useful if you want to run older software on Windows 10, but sometimes using the Compatibility mode can lead to certain issues.

To fix this problem with Arduino, you need to disable Compatibility mode by doing the following:

Navigate to Compatibility tab and make sure that Run this program in compatibility mode for isn’t checked.

Some users claim that you can fix this problem by running Arduino IDE in Compatibility mode for Windows 98/Me.

9. End chúng tôi process

Users reported that Arduino software freezes when they try to upload a program, and this can be a major problem for users.

Apparently, Logitech process called chúng tôi is causing this error to appear and in order to fix it you need to end this process from Task Manager. To do that, follow these simple steps:

Press Ctrl + Shift + Esc to open Task Manager.

When Task Manager opens, go to Details tab and look for chúng tôi .

After the process is closed, close Task Manager and try to run Arduino software again.

If chúng tôi is causing this problem on your PC, you’ll have to end this process every time you want to run Arduino software on your PC.

10. Run Arduino bat file

According to users, they are getting Arduino has encountered a problem and needs to close error message on their PC when trying to start Arduino by running the chúng tôi file.

11. Don’t run cygwin

Users reported that certain issues can occur if you try to compile a sketch in Arduino while having cygwin running in the background. To avoid this problem on your PC, you can simply turn off cygwin while using Arduino.

If that doesn’t help, you might have to delete chúng tôi from the Arduino directory and replace it with a chúng tôi from your cygwin directory.

12. Disable certain devices

Few users reported that Arduino software takes a long time to start and it seems frozen when you try to open Tools menu. This issue is caused by other devices that can create COM ports on your PC.

A good example of these devices are Bluetooth devices, so if you one of these devices available, be sure to disable it from Device Manager. To do that, you need to follow these steps:

Open Device Manager.

After disabling these devices the loading time of Arduino software should improve.

13. Check if your device is working properly

If the issue appears on all devices, it means that your Arduino board is faulty and you should replace it as soon as you can.

As you can see, there are all sorts of problems with Arduino and Windows 10, but in most cases, you should be able to fix these problems simply by installing the proper driver or by checking your security certificates.

Was this page helpful?


11 Ways To Fix Can’t Find App On Your Android Phone

Sometimes, while using the phone, users can uninstall an app unintentionally. To check if you have accidentally uninstalled an app, you can easily check if the app you’re looking for is still downloaded on your smartphone.

3. Search for the app you’re looking for. If you’re unable to find it, the app has likely been uninstalled.

4. If so, you can go to the Play Store and download it again.

Due to Android’s flexibility, different UI Skins work differently to show apps installed on the phone, like an app drawer or no app drawer. There is a possibility that you’re looking for the app on the home screen instead of the App Drawer.

2. If you are still unable to find the app, try Searching for the app you’re looking for on this screen.

If you do not prefer to have a separate App Drawer consisting of All the Apps and wish to keep all your apps on your home screen itself.  Follow these steps to disable the app drawer on your phone, we have used Redmi Note 10 Pro running MIUI 13.

1. Go to Home Screen under your phone Settings.

2. Under Settings, go to the Home screen Settings.

3. Choose Classic instead of ‘With App Drawer’. This brings all your apps to one screen, similar to that of iOS.

Sometimes third-party launchers may be the root cause of the issue, of an app not being visible among installed apps. You can switch to your default launcher and check if the app is visible again.

1. From the same Home Screen settings as mentioned in the previous section, tap on Default Launcher.

If the app is present on your smartphone but you’re unable to find it, there is a chance that you might have been mistakenly added to a folder. Here’s how to check it.

1. Locate the Folder icon on your home screen or App Drawer.

Once you found the said app, you can simply drag the app out of the folder if needed.

Universal search is nowadays present on most phones. It is a quick way to search for anything you’re looking for, either online or also present locally on your phone. This includes apps downloaded on your phone.

1. Go to the App Drawer and locate the search bar.

2. Here, you can search for the app you’re looking for.

In case your phone does not have a universal search, you can read our dedicated guide to Get Universal Search on Any Android Phone.

Most Android UI offers a feature to hide apps if you will not be able to find an app on the home screen or App Drawer. Then there is a possibility that you might have hidden it probably by mistake. We have a dedicated guide to unhide apps on MIUI and Samsung OneUI. In the case of other phones, we have shared the steps below to unhide apps.

1. Go to Settings and tap on Privacy.

2. Under Privacy Settings, tap on Hide Apps.

4. You can change the access code from Settings.

5. This will help you set the access code to the app.

6. Once the code is set up, this access code needs to be entered on the dialer pad to access the hidden apps.

In the case of VIVO or IQOO phones, running on FunTouch OS, you can follow these steps to hide and unhide apps.

1. Go to Settings on your VIVO or IQOO phone, and navigate to Security.

3. Next, tap on App Hiding.

4. Now, check the list of Hidden Apps. You can unhide the apps from here by toggling them off.

5. Alternatively, you can swipe up twice on the home screen to view the hidden apps.

6. You can also modify the settings according to your requirements to configure how and when should the apps be hidden.

Another way to check if an app is hidden on your phone is to check the app status, whether it is installed on your phone or not, from the Play Store. Here’s how it can be done:

1. Go to the Google Play Store app, and Search for the app that you’re looking for.

2. If you see the Install button, then the app is not installed on your phone and you need to install it again.

If the app is already present on your phone and you’re still unable to see it, you can re-install the app, from the Google Play store. Once it has been uninstalled, you can re-install it and check if you’re able to view the app now.

Note: This will delete all your data in the smartphone permanently.

1. Go to Settings and tap on About Phone.

2. Here, tap on Factory Reset.

To avoid such issues in the future, you can enable a setting on your smartphone to automatically add new apps to your home screen when installed from the Google Play store. This prevents you from dragging and dropping it from the App Drawer every time, here’s how it can be done on MIUI.

1. Go to your App Drawer, on your Xiaomi Phone, running on MIUI.

3. Enable the toggle to place new apps on the home screen.

Now every time a new app is installed, it will be added directly to your home screen.

Also, Read the following:

You can also follow us for instant tech news at Google News or for tips and tricks, smartphones & gadgets reviews, join GadgetsToUse Telegram Group or for the latest review videos subscribe GadgetsToUse YouTube Channel.

Fix Error Saving Wireless Profile Message On Windows 11/10

While viewing the internet connection properties, some users received the “Error saving wireless profile” message. The same error message can also occur while setting up a new or deleting the existing network profile on Windows 11/10. If you see this error message, this guide will show you how to deal with this problem.

The complete error message is:

Error saving wireless profile – Windows has encountered an error saving the wireless profile. Specific error: The system cannot find the file specified.

What is a WiFi profile name?

A wireless network profile or WiFi profile contains information, like SSID, password, etc. Your computer uses this information to connect to the internet. SSID (Service Set IDentifier) is the name of a network. When you open WiFi on your computer or smartphone, the list of networks that you see is SSIDs.

How do I add a profile to my WiFi?

Windows 11/10 allows users to create new WiFi network profiles. You can do this by using the Settings app or the Control Panel. While setting up a new network profile, you have to enter the network name, security type, and security key. As explained earlier, some users receive the “Error saving wireless profile” message while creating a new network profile. If the same thing happens to you, you can use the solutions provided in this post.

Fix Error saving wireless profile message on Windows 11/10

If while creating a new network profile or deleting the existing one, or viewing the properties of your network connection, you see the “Error saving wireless profile” error message, use the fixes written below.

Install the latest Windows Update

Repair corrupted system files

Run antimalware and antivirus scans

Troubleshoot in a Clean Boot state

Uninstall and reinstall your network driver

Reset your WiFi network

Below, we have explained all these fixes in detail.

1] Install the latest Windows Update

You may experience issues like this on your Windows computer if you have an outdated version of Windows 11/10. Hence, make sure that you have the latest version of Windows 11/10. Open Windows 11/10 Settings and go to the Windows Update page to check for updates manually. If an update is available, install it.

2] Repair corrupted system files

Another possible cause of this error is the corrupted system files. Windows 11/10 operating system has built-in tools to repair corrupted system files. You can use the System File Checker and DISM tools to repair your system files. After the process is completed, check if the issue persists.

3] Run antimalware and antivirus scans

If everything sounds fine like you have the latest version of Windows 11/10, your system files are not corrupted or you have repaired your system files, but the error message still appears in internet connection properties, your system might have been infected. You should run an antimalware scan and antivirus scan.

Windows Defender is a good antivirus developed by Microsoft. If you want, you can also use free antivirus software or free standalone on-demand antivirus software to scan your system.

4] Troubleshoot in a Clean Boot state

The error might have been triggered due to a conflicting third-party startup app or third-party Service. To check whether or not this is the case with you, troubleshoot in a Clean Boot state. Start your computer in Clean Boot and see if Windows displays the same error message while creating a new WiFi profile, deleting the existing WiFi profile, or viewing the internet connection properties.

If the issue does not occur in the Clean Boot state, your next step is to find the conflicting third-party startup app or Service. To do so, enable all the disabled startup apps and restart your computer. Now, see if the problem persists. If yes, start disabling the apps one by one and restart your computer every time you disable one startup app. This will help you identify the problematic startup app. Follow the same procedure to identify the conflicting third-party Service. Once you find the problematic Service, disable it permanently by using the Services app.

Some affected users found the SafetyNutManager process causing the problem.

5] Uninstall and reinstall your network driver

You can also try reinstalling your network driver and see if it helps. The steps are as follows:

Open the Device Manager.

Expand the Network adapters branch.

Restart your computer.

On the restart, Windows will look for missing drivers and install them.

6] Reset your WiFi network

We also suggest you reset your WiFi network. This action will reset the networking components to default and reinstall the network adapters. A network reset on Windows 11/10 is useful if you are experiencing issues with your internet connection.

I hope this helps.

Update the detailed information about Fix: Can’t Update Spyware Protection On Windows 10/11/7 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!