Trending February 2024 # Fix Error_File_Not_Found Error Message In A Few Easy Steps # Suggested March 2024 # Top 5 Popular

You are reading the article Fix Error_File_Not_Found Error Message In A Few Easy Steps updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix Error_File_Not_Found Error Message In A Few Easy Steps

Fix ERROR_FILE_NOT_FOUND error message in a few easy steps




Windows computers are prone to system errors that prevent them from running properly.

The ERROR_FILE_NOT_FOUND error message occurs when users try to open a file in a particular app using the Open File dialog box.

Repairing the registry or cleaning temporary files are two of the confirmed working solutions you may apply.

If you have a frequent recurrence of such problems, make sure to check the Windows 10 errors hub.

If you’re getting the ERROR_FILE_NOT_FOUND 2 (0x2) or The system cannot find the file specified error messages, follow the troubleshooting steps listed in this article to fix them.

The ERROR_FILE_NOT_FOUND issue occurs when users try to open a file in a particular app using the Open File dialog box. This error is prevalent for Windows 10 OS.

There are multiple causes to take into consideration: power failures, the folder name of the file was changed by mistake, registry keys were changed, the install process of various files didn’t complete correctly, and more.

To fix this on your Windows 10 PC, follow the steps listed below.

How can I fix ERROR_FILE_NOT_FOUND error message? 1. Repair your registry

Now type the sfc /scannow command.

Wait for the scanning process to complete and then restart your computer. All corrupted files will be replaced on reboot.

The simplest way to repair your registry is to use a dedicated tool, such as CCleaner. Don’t forget to first backup your registry in case anything goes wrong.

If you haven’t installed any registry cleaner on your computer, check out our article on the best registry cleaners to use on Windows 10 PCs.

You can also use Microsoft’s System File Checker to check for system file corruption. Use the above steps to run an SFC scan.

scannow command has stopped before the process finished? Don’t worry, we’ve got an easy fix for you.

Make sure that you’re running the latest Windows OS updates on your machine. As a quick reminder, Microsoft constantly rolls out Windows updates in order to improve the system’s stability and fix various issues.

Go to Windows Update, check for updates and install the available updates. To access the Windows Update section, you can simply type update in the search box. This method works on all Windows versions.

3. Clean your temporary files and folders

Go to Start.

Type Disk Cleanup and launch the tool.

Select the disk that you want to clean. The tool will then tell you how much space you can free up.

Select Clean up system files.

The simplest and quickest manner to delete your temporary files and folders is to use Disk Cleanup. As you use your computer or browse the Internet, your PC accumulates various unnecessary files.

These so-called junk files may affect your computer’s processing speed, causing apps to respond slowly and may also trigger various error codes, including the ERROR_FILE_NOT_FOUND error message.

4. Run the chkdsk command

Enter the chkdsk /f X: command. Replace X with the appropriate letter of your partition and hit Enter.

Wait for chkdsk to repair your files.

The chkdsk command helps you detect and repair various disk issues, including corrupted files and folders.

Expert tip:

5. Download the file again

This error also occurs while installing downloaded apps and programs. Sometimes your download can become damaged or corrupted, which may trigger the ‘file not found’ error.

In this case, try to download the respective file or the entire app again. You can also use a dedicated download manager for this task.

6. Remove the chúng tôi folder

The chúng tôi folder may also cause various errors. As a quick reminder, the chúng tôi folder appears when you upgrade your Windows version or perform a clean install of Windows 10.

The role of this folder is to keep your previous Windows installation files, allowing you to restore it. Here’s how to remove the chúng tôi folder with ease.

7. Change the location of the file

Moving the file affected by the file not found error to a different folder may fix the problem. Try moving the file to a different folder on the same drive. If this doesn’t work, try moving it on a different drive.

8. Remove conflicting software

If you received the file not found error shortly after you installed a new app or program on your computer, try uninstalling the respective app or program.

Sometimes, various third-party apps may interfere with the file that you’re trying to open. To remove a program, go to Start and type Control Panel.

9. Disable your antivirus

Sometimes, your antivirus may block the file that you are trying to open. Temporarily disable your antivirus and then try to open the file again. If this doesn’t work, try downloading the file again.

Open it and see if this works now. Don’t forget to enable your antivirus after you finish downloading the file.

If completely removing it from your PC is needed, be sure to check out our top uninstaller software picks.

Was this page helpful?


Start a conversation

You're reading Fix Error_File_Not_Found Error Message In A Few Easy Steps

How To Connect Alexa To A Stereo Receiver In A Few Easy Steps

How to connect Alexa to a stereo receiver in a few easy steps






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

You’re obviously looking for a quick way to connect Alexa to a stereo receiver. If you’ve invested in a nice stereo system already, be sure that it’s easier than ever to ask Alexa to play music.

The idea is that Amazon’s Alexa voice control system already offers a wide range of voice commands on its Amazon Echo systems. Wired and wireless are both great options to go for when you want to immediately connect Alexa to your stereo receiver.

Moreover, the possibilities of voice control seem endless these days. So, that’s even better if integrated voice control was on the initial checklist for your stereo receiver.

From using Bluetooth to voice control, here we’ll tell you everything you need to know for successfully establishing the connection. Just keep on reading the lines below.

How can I connect Alexa to a stereo receiver? 1. Connect Alexa to your stereo receiver via Bluetooth

Assuming that your current sound system supports Bluetooth or has a line-in connection, let us assure you that integrating the voice assistant works like a breeze.

An Amazon Alexa system (e.g. Amazon Echo, Echo Dot, Echo Plus, or Echo Spot) is though required. Each of these Amazon devices has Bluetooth and an analogue sound output as active interfaces to the existing systems.

Alexa will immediately answer with a voice message, proving the successful coupling to your stereo receiver.

Interested in the best 2 channel stereo receiver with Bluetooth? Check out this list with our top picks.

2. Stream music by using an AUX cable

How to stream music over a system that is not even equipped with Bluetooth? Just use your smartphone and connect Alexa to your stereo receiver with an AUX cable (3.5 mm).

3. Use voice control to establish the connection

Another simple way to connect your stereo receiver to Alexa is by using voice control. Unfortunately, there’s an unpleasant limitation you need to take into consideration from the very start.

There’s no chance to switch the system on or off, just as you cannot control video by only using your receiver. Voice control is limited to music playback. That’s rather disappointing with this list of commands expanding so rapidly.

If music playback isn’t enough for you, give a try to Harmony’s Hub-based remotes. Bottom line, these are compatible with Alexa and give you that touch of extra functionality you want to enjoy.

One remote is all it takes to control your home entertainment system and all home automation devices. Feel free to choose between:

Looking for some voice-controlled home automation software? Take a look at this handy list.

No matter what you’re thinking of, you’re clearly attempting to make Alexa a part of your daily life. Now that there are so many ways of interaction, you might find yourself talking to Amazon’s voice assistant more often.

Besides giving voice commands such as Alexa, show me the weekend forecast, connecting Alexa to your stereo receiver is just another natural step to take in this process.


Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


How To Fix Chatgpt’S Internal Server Error (500) Message

To fix ChatGPT showing an Internal server error message, you should first check if ChatGPT is facing a service-side problem via the official status page linked below. In case the problem lies at your end, either try to access it at a different time or read through our recommended fixes below.


Why is ChatGPT showing “Internal server error”?

The message indicates that ChatGPT is experiencing high demand at the moment. Either try again later or subscribe to ChatGPT Plus, which grants you priority access to the chatbot.

How to fix the “internal server error” on ChatGPT


There are a few reasons why ChatGPT may show you the Internal server error message, ranging from an expired login to rate limits. Here are a few solutions you can try:

1. Refresh the page and check your internet connection

To combat large-scale abuse of ChatGPT, OpenAI runs a verification step to ensure you’re a human before you can use the service. However, that validation times out after a while, so you should refresh the page to let it run again. You should see the “Please stand by, we are checking your browser” message appear for a brief moment.

If the page fails to load, that may indicate a problem with your internet connection or misconfigured software. Try to access ChatGPT from a different browser or computer, and use a different Wi-Fi network.

2. Log into your account again

If simply refreshing the page does not work, you may be dealing with an expired login session. As you may already know, using ChatGPT requires an OpenAI account. If it has been a while since you last logged in, your session may have expired. Simply log out of your account and sign in again.

3. Check for rate limits

If you use ChatGPT a lot, you may have run into OpenAI’s rate limit. In a nutshell, free accounts can only request a few responses per hour, although daily and monthly limits may apply too. The hourly limit is based on the length of the chatbot’s responses, so you’re more likely to reach it when generating several paragraphs of text.

Once you hit the rate limit, you have no option but to wait until the counter resets. In the meantime, you won’t be able to generate new responses. You may also find your account rate limited if other computers on your network have used ChatGPT recently. But this is unlikely to happen if you’re using your own internet connection.

4. Try the ChatGPT smartphone app

ChatGPT’s new smartphone app offers a simpler interface and faster response times. If you can’t fix the internal server error on your computer, it’s worth trying the app on your mobile instead. Keep in mind that you’ll still have to log into an OpenAI account, so this method won’t let you chat if you’ve reached the rate limit.

Hopefully, one of the above fixes helps you get past ChatGPT’s Internal server error message. If you often find yourself waiting for the chatbot to become available, consider subscribing to ChatGPT Plus. It grants access to the chatbot during periods of high demand and also increases the chatbot’s response speed.

If none of these solutions work for you, consider using one of the many ChatGPT alternatives available right now. Most of them rely on the same GPT-3 language model, so you can expect similar output quality.

Fatal Error Message In Dungeon Defenders 2

Dungeon Defenders 2 is an Action Tower Defense game developed by Chromatic Games. Some users are getting the Fatal Error message while launching the Dungeon Defenders 2 game. Some of them have experienced the crashing issue with the game after this message appears. If you are getting the Fatal Error message in Dungeon Defenders 2 game, the solutions provided in this post may help you fix it.

Fix Dungeon Defenders 2 Fatal Error

The following solutions may help you get rid of this Fatal Error message in Dungeon Defenders 2 when playing the game on your Windows 11/10 PC.

Launch the game as an administrator

Verify the integrity of the game files

Turn off your Bluetooth

Disable your antivirus temporarily

Turn off VSync

Roll Back your graphics card driver

Uninstall and reinstall the game

Let’s see all these fixes in detail.

1] Launch the game as an administrator

Some files in a game may require administrative privileges. If the administrative privileges are not granted to those files, the game may display some errors. This might be the case with you. To check this, launch the game as an administrator and see if it helps.

If launching the game as an administrator works, you can make Dungeon Defenders 2 always run as an administrator.

2] Verify the integrity of the game files

This solution is for Steam users. Sometimes, the problem occurs due to corrupted game files. If this is the case with you, verifying the integrity of the game files will fix the problem. The following instructions will help you verify the integrity of your game files.

Open Steam.

Select the LOCAL FILES tab.

This process will take some time. After the process gets completed, check if the problem persists.

3] Turn off your Bluetooth

Some users have confirmed that the Bluetooth of their Windows 11/10 was causing the problem. The error disappeared when they launched the game after turning off the Bluetooth. You can also try this. The steps to turn off Bluetooth on Windows 11 and Windows 10 are listed below:

On Windows 11, open Settings, then select Bluetooth and devices from the left side. Turn off the button next to Bluetooth.

5] Disable your antivirus temporarily

Sometimes, antivirus software generates false-positive flags and blocks genuine applications or games from working properly. We suggest you disable your antivirus temporarily and see if this fixes the problem. For some users, temporarily disabling the antivirus did not work. But when they uninstalled their antivirus, the issue was fixed. If the issue persists even after disabling the antivirus, you can try uninstalling it. But before you uninstall your antivirus, make sure that you have its product activation key. If you have purchased the antivirus online, the key was sent to you in your email. You will not be able to activate your antivirus after reinstalling it if you do not have its product activation key.

If disabling the antivirus works, you can add the executable file of Dungeon Defenders 2 as an exception to your antivirus. Refer to the user manual of your third-party antivirus or visit its official website to know how to do that.

Read: How to clear Origin cache on Windows 11/10.

6] Turn off VSync

VSync or Virtual Sync is a technology that eliminates the tearing issue in video games. Sometimes, VSync causes problems in video games. If you have turned on this feature, the error might be occurring due to this. To check this, disable VSync and then launch the game.

7] Roll Back your graphics card driver

For some users, the problem started appearing after updating their graphics card driver. In such a case, uninstalling the latest version of the graphics card driver fixes the problem. Open the Device Manager and see if the Roll Back Driver option is available for your graphics card driver. If yes, uninstall its latest version and see if this helps. The steps for the same are written below:

Press the Win + X keys and select the Device Manager.

The above action will restore the previous version of your graphics card driver. When the rolling back process gets completed, launch the game and see if the error appears this time.

8] Uninstall and reinstall the game

If none of the above fixes helped you, uninstall and reinstall the game.

Read: Teardown keeps crashing or freezing on Windows PC.

How can I fix Dungeon Defenders 2 Connection Timed Out error?

If you are getting the Connection Timed Out error in Dungeon Defenders 2, first, check your internet connection. An unstable internet connection causes several errors in games. Sometimes, connection issues occur due to the game server issues. Hence, wait for some time and launch the game later.

You can try some fixes like changing your server in your game settings, connecting your computer to your router via an ethernet cable, etc.

Dungeon Defenders 2 stuck on the loading screen

If Dungeon Defenders 2 sticks on the loading screen, open the Task Manager and kill the game. After that, wait for a few minutes and relaunch the game. Sometimes, the problem occurs due to an unstable internet connection. Hence, check your internet connection. If your internet connection is stable and working fine, restart your modem and see if it fixes the problem.

Hope this helps.

Fix Error Saving Wireless Profile Message On Windows 11/10

While viewing the internet connection properties, some users received the “Error saving wireless profile” message. The same error message can also occur while setting up a new or deleting the existing network profile on Windows 11/10. If you see this error message, this guide will show you how to deal with this problem.

The complete error message is:

Error saving wireless profile – Windows has encountered an error saving the wireless profile. Specific error: The system cannot find the file specified.

What is a WiFi profile name?

A wireless network profile or WiFi profile contains information, like SSID, password, etc. Your computer uses this information to connect to the internet. SSID (Service Set IDentifier) is the name of a network. When you open WiFi on your computer or smartphone, the list of networks that you see is SSIDs.

How do I add a profile to my WiFi?

Windows 11/10 allows users to create new WiFi network profiles. You can do this by using the Settings app or the Control Panel. While setting up a new network profile, you have to enter the network name, security type, and security key. As explained earlier, some users receive the “Error saving wireless profile” message while creating a new network profile. If the same thing happens to you, you can use the solutions provided in this post.

Fix Error saving wireless profile message on Windows 11/10

If while creating a new network profile or deleting the existing one, or viewing the properties of your network connection, you see the “Error saving wireless profile” error message, use the fixes written below.

Install the latest Windows Update

Repair corrupted system files

Run antimalware and antivirus scans

Troubleshoot in a Clean Boot state

Uninstall and reinstall your network driver

Reset your WiFi network

Below, we have explained all these fixes in detail.

1] Install the latest Windows Update

You may experience issues like this on your Windows computer if you have an outdated version of Windows 11/10. Hence, make sure that you have the latest version of Windows 11/10. Open Windows 11/10 Settings and go to the Windows Update page to check for updates manually. If an update is available, install it.

2] Repair corrupted system files

Another possible cause of this error is the corrupted system files. Windows 11/10 operating system has built-in tools to repair corrupted system files. You can use the System File Checker and DISM tools to repair your system files. After the process is completed, check if the issue persists.

3] Run antimalware and antivirus scans

If everything sounds fine like you have the latest version of Windows 11/10, your system files are not corrupted or you have repaired your system files, but the error message still appears in internet connection properties, your system might have been infected. You should run an antimalware scan and antivirus scan.

Windows Defender is a good antivirus developed by Microsoft. If you want, you can also use free antivirus software or free standalone on-demand antivirus software to scan your system.

4] Troubleshoot in a Clean Boot state

The error might have been triggered due to a conflicting third-party startup app or third-party Service. To check whether or not this is the case with you, troubleshoot in a Clean Boot state. Start your computer in Clean Boot and see if Windows displays the same error message while creating a new WiFi profile, deleting the existing WiFi profile, or viewing the internet connection properties.

If the issue does not occur in the Clean Boot state, your next step is to find the conflicting third-party startup app or Service. To do so, enable all the disabled startup apps and restart your computer. Now, see if the problem persists. If yes, start disabling the apps one by one and restart your computer every time you disable one startup app. This will help you identify the problematic startup app. Follow the same procedure to identify the conflicting third-party Service. Once you find the problematic Service, disable it permanently by using the Services app.

Some affected users found the SafetyNutManager process causing the problem.

5] Uninstall and reinstall your network driver

You can also try reinstalling your network driver and see if it helps. The steps are as follows:

Open the Device Manager.

Expand the Network adapters branch.

Restart your computer.

On the restart, Windows will look for missing drivers and install them.

6] Reset your WiFi network

We also suggest you reset your WiFi network. This action will reset the networking components to default and reinstall the network adapters. A network reset on Windows 11/10 is useful if you are experiencing issues with your internet connection.

I hope this helps.

Raspberry Pi Not Reading The Sd Card? Fix It In 2 Easy Steps

Raspberry Pi not reading the SD card? Fix it in 2 easy steps




Probably the most common error with Raspberry Pi is a corrupted SD card, mainly due to improper shutdown or power failures.

There is not much you can do when this happens, but we’ve listed an additional option besides the fresh re-install.

For other issues that you might have with your Raspberry Pi, visit our Raspberry Pi errors hub.

Also, we have a lot of useful guides in our

Developer Tools

section, so you should check it out.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

On the first boot, the Raspberry Pi needs an SD card with the OS mounted on it; otherwise, you can’t go any further.

Many Pi boards come with a microSD card with the NOOBS (New Out Of the Box Software) installer; of course, you can also have your own standalone image. Whichever method you use, it is recommended to use an 8GB for SD card or higher.

But what’s most important, is to use a reliable SD card manufacturer. Now, you might probably not know from the start whether you’ve picked the wrong one, but buying only from authorized suppliers and doing some research on recommended SD card brands for Pi might be helpful.

When booting, you will know that there’s a problem with the SD card if the red LED is blinking, while the green LED is not. Or, the green LED can blink regularly (3 to 8 times) to indicate that there’s a problem with the card.

How do I fix the Raspberry Pi SD card issues? 1. Mount a fresh OS image

Format the SD card in another PC, using SDFormatter. (If the formatting fails, the card is broken.)

Get a clean OS or image from here.

Save and insert the card in your Raspberry Pi to see if it works.

This is the standard recommended solution to fix a faulty microSD card. However, users complained that the Pi fails to recognize the card all too frequently and that they have to re-install a fresh image over and over again.

It is very frustrating, which is why the next solution might be helpful, but only after a first successful first boot: namely to make a read-only copy of the OS on a USD stick or another media device.

2. Make a read-only copy of the SD card

Copy the Raspberry image to your SD card.

Boot normally from the card, but

don’t Expand filesystem. Set

up time zone and international settings.

Run sudo fdisk/ dev/mmcblk0 and press p to print the current partition table.

Then enter the following commands:

Modify the /etc/fstab  as follows:

Run sudo partprobe to recognize the partition.

Format the new partition with sudo mkfs –type ext4 /dev/mmcblk0p3


If you then need to make changes to the system, you can remount the read-only partitions with write access sudo mount -o remount, rw /dev/mmcblk0p2 .

Additional info

Users have reported that their SD card was functional when inserted into another Raspberry Pi board – usually an older version than the one that didn’t boot. In the end, they solved the problem with a new card.

Sometimes, just taking the SD card out and rebooting can fix the issue.

It was also mentioned that the plastic holder of the SD card might have been the problem since some Pi version is very picky about these details.

Was this page helpful?


Update the detailed information about Fix Error_File_Not_Found Error Message In A Few Easy Steps on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!