Trending February 2024 # Fix Kernel Mode Heap Corruption Bsod On Windows 11/10 # Suggested March 2024 # Top 11 Popular

You are reading the article Fix Kernel Mode Heap Corruption Bsod On Windows 11/10 updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix Kernel Mode Heap Corruption Bsod On Windows 11/10

If you are receiving a KERNEL_MODE_HEAP_CORRUPTION Blue Screen on Windows 11/10, then this post will help you resolve it. One of the primary reasons for this error is a conflict between Windows and an outdated driver or a corrupt Windows driver. Other known reasons include memory leaks or hardware faults. However, there is a rare chance where a software conflict can do that unless it has to do something with the drivers.

The KERNEL MODE HEAP CORRUPTION bug check has a value of 0x0000013A. This indicates that the kernel mode heap manager has detected corruption in a heap.


Follow these methods to resolve the BOSD related to Kernel Mode Heap Corruption.

Run ChkDsk

Use Device Verifier Manager

Update or Rollback Driver

Fix Corrupt System Files

Run Memory Diagnostics

Run Hardware Troubleshooter

You will need a clear understanding of what the methods do here and admin permission.

Moreover, if you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run ChkDsk

Run ChkDsk using the following command:

chkdsk c: /r 2] Device Verifier Manager

One of the best methods to check if the driver is an issue is to run the Driver Verifier Manager. The tool will help troubleshoot, identify & resolve common device driver problems.

Open the Run prompt ( Win + R), type verifier, and then press the Enter key. Once the Device Verifier is open, select Create Standard settings and then select Automatically select unsigned drivers. This will narrow down the issue if it’s happening because of unsigned drivers. Once you detect it, uninstall the driver, and then reinstall the correct driver.

3] Update or Rollback Driver

Depending on the situation, you can either update or roll back the driver and check if the BSOD issue is resolved.

If the BSOD occurred because you have recently updated the driver, you could roll back using the Device Manager. Use Win + X, followed by M to open the device manager. Next, locate the hardware for which you have updated the driver.

If the BSOD occurred after a Windows Update, then it’s possible that you need to install the latest version of the driver, which is compatible with the version of Windows.

4] Fix Corrupt System Files

System File Checker and DISM are two tools that can help fix corrupt system files that could be the cause of the BOSD screen. Follow our exhaustive guide on how to use them.

SFC command:

sfc /scannow

DISM Command:

Dism /Online /Cleanup-Image /RestoreHealth

First, run the SFC command; if that doesn’t work out, use the DISM command. Make sure to run them on an elevated command prompt.

5] Run Memory Diagnostics

6] Run Hardware Troubleshooter

Microsoft offers a built-in hardware troubleshooter that you can invoke using the following command on PowerShell or an elevated Command Prompt.

msdt.exe -id DeviceDiagnostic

The wizard will then run its diagnostics. It may prompt to enable to check for an updated driver. Once done, if there is an issue with the driver, it will figure out and offer a solution.

I hope these solutions help you out with the BSOD related to Kernel Mode Heap Corruption on Windows 11/10. The issue is related to drivers, but it is always good to check for any recently installed software that can also cause the problem.

More Tips: Fix Windows Stop Errors or Blue Screen of Death.

You're reading Fix Kernel Mode Heap Corruption Bsod On Windows 11/10

How To Fix Arduino Problems On Windows 10/11

How to fix Arduino problems on Windows 10/11




Arduino is an open-source electronics platform that anyone can use.

You need to program it via connectivity to a PC. However, issues with Windows 10 are not uncommon at this phase.

To read more about this amazing tool, check out our dedicated Arduino Errors page.

If you need more general troubleshooting guides, check out our Windows 10 Fix page.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Arduino is similar to Raspberry Pi in a way, but users reported problems with Arduino on Windows 10, so today we’re going to show you how to fix problems with your Arduino on Windows 10.

Steps to fix Arduino issues on Windows 10

In most cases, you can quickly fix Windows 10 Arduino bugs by installing the latest drivers manually. If this method fails to fix your issues, try using compatibility mode.

Now, if the issue persists, just follow the instructions listed below and we’re sure one of these solutions will help you fix the technical glitches you’re experiencing.

1. Run IDE as Administrator

Users reported Serial port ‘COM4’ already in use try quitting any programs that may be using it error message on their Windows 10 PC.

Arduino comes with its own IDE tool that allows you to program it, but it seems that users are unable to start the IDE due to this error.

If running the IDE as administrator fixes the problem you’ll have to use this method every time you want to start the application.

If you want, you can set the application to always run with administrative privileges by following these steps:

After running Arduino IDE as an administrator, the problem should be completely resolved.

2. Install the driver manually

Users reported that they can’t connect to Arduino with IDE, and that can be a major problem. In order to fix this issue, you need to install Arduino drivers manually, and you can do that by following these steps:

When Device Manager opens, locate the Arduino device that doesn’t have its driver installed.

Few users reported that they are unable to install the driver because it’s unsigned. This is a security measure by Windows designed to protect you from potentially malicious drivers.

By using this feature you can only install drivers that are digitally signed and genuine to your PC. Unfortunately, few users reported that this feature caused the problem with Arduino drivers.

If you can’t install Arduino drivers on your Windows 10 PC we recommend that you turn off driver signature enforcement feature by following these steps:

You’ll see three options available on the screen. Choose Troubleshoot.

When your computer restarts you’ll see a list of options available on the screen. Press F7 or 7 on your keyboard to select Disable driver signature enforcement option.

Now Windows 10 will start normally and you’ll be able to install unsigned drivers without any problems.

You might encounter a warning while trying to install an unsigned driver, but you’ll still be able to install Arduino driver without any problems.

3. Change your date

Few users reported issues while installing Arduino drivers on their system, and it seems that the problem was caused by an expired certificate.

This can prevent the driver from being installed, but you should be able to fix the problem simply by changing your date.

To do that on Windows 10, follow these steps:

After your date is changed try to install the driver again.

After you install the driver, go to Date and time window again and set the correct date. You can also turn on Set time automatically and Set time zone automatically options.

4. Connect the device to a different PC

According to users, if Windows 10 can’t recognize your Arduino you might want to connect it to a different PC that runs an older version of Windows. Users reported that their device was recognized after connecting it to a different PC.

After finding the Arduino model, they were able to download the driver and install the device on their Windows 10 PC.

5. Install the necessary certificates

If you can’t install Arduino drivers on your Windows 10 PC, you might have a problem with driver certificates. You can easily fix that by installing the necessary certificates on your PC. To do that, you need to follow these steps:

Open Arduino/drivers directory.

After the certificate is installed you should be able to install Arduino drivers without any problems.

6. Reinstall Arduino drivers

Expert tip:

Apparently, this issue is caused by your drivers, and one of the simplest ways to fix this problem is to reinstall your drivers. To do that, follow these steps:

Open Device Manager.

After the driver is removed, restart your PC.

After deleting the driver, simply download the latest version of the driver and install it on your PC. By doing that all driver-related issues with Arduino will be resolved.

7. Check if the proper board is selected

According to users, you can get Can’t open device error message if you don’t select the proper board from Arduino IDE. To avoid this problem be sure to go to Tools section and select the appropriate board.

8. Turn on/off Compatibility mode

Users reported No serial port name defined error message in Arduino IDE, and according to them, this issue is caused by Compatibility mode.

This feature is extremely useful if you want to run older software on Windows 10, but sometimes using the Compatibility mode can lead to certain issues.

To fix this problem with Arduino, you need to disable Compatibility mode by doing the following:

Navigate to Compatibility tab and make sure that Run this program in compatibility mode for isn’t checked.

Some users claim that you can fix this problem by running Arduino IDE in Compatibility mode for Windows 98/Me.

9. End chúng tôi process

Users reported that Arduino software freezes when they try to upload a program, and this can be a major problem for users.

Apparently, Logitech process called chúng tôi is causing this error to appear and in order to fix it you need to end this process from Task Manager. To do that, follow these simple steps:

Press Ctrl + Shift + Esc to open Task Manager.

When Task Manager opens, go to Details tab and look for chúng tôi .

After the process is closed, close Task Manager and try to run Arduino software again.

If chúng tôi is causing this problem on your PC, you’ll have to end this process every time you want to run Arduino software on your PC.

10. Run Arduino bat file

According to users, they are getting Arduino has encountered a problem and needs to close error message on their PC when trying to start Arduino by running the chúng tôi file.

11. Don’t run cygwin

Users reported that certain issues can occur if you try to compile a sketch in Arduino while having cygwin running in the background. To avoid this problem on your PC, you can simply turn off cygwin while using Arduino.

If that doesn’t help, you might have to delete chúng tôi from the Arduino directory and replace it with a chúng tôi from your cygwin directory.

12. Disable certain devices

Few users reported that Arduino software takes a long time to start and it seems frozen when you try to open Tools menu. This issue is caused by other devices that can create COM ports on your PC.

A good example of these devices are Bluetooth devices, so if you one of these devices available, be sure to disable it from Device Manager. To do that, you need to follow these steps:

Open Device Manager.

After disabling these devices the loading time of Arduino software should improve.

13. Check if your device is working properly

If the issue appears on all devices, it means that your Arduino board is faulty and you should replace it as soon as you can.

As you can see, there are all sorts of problems with Arduino and Windows 10, but in most cases, you should be able to fix these problems simply by installing the proper driver or by checking your security certificates.

Was this page helpful?


Fix Error Saving Wireless Profile Message On Windows 11/10

While viewing the internet connection properties, some users received the “Error saving wireless profile” message. The same error message can also occur while setting up a new or deleting the existing network profile on Windows 11/10. If you see this error message, this guide will show you how to deal with this problem.

The complete error message is:

Error saving wireless profile – Windows has encountered an error saving the wireless profile. Specific error: The system cannot find the file specified.

What is a WiFi profile name?

A wireless network profile or WiFi profile contains information, like SSID, password, etc. Your computer uses this information to connect to the internet. SSID (Service Set IDentifier) is the name of a network. When you open WiFi on your computer or smartphone, the list of networks that you see is SSIDs.

How do I add a profile to my WiFi?

Windows 11/10 allows users to create new WiFi network profiles. You can do this by using the Settings app or the Control Panel. While setting up a new network profile, you have to enter the network name, security type, and security key. As explained earlier, some users receive the “Error saving wireless profile” message while creating a new network profile. If the same thing happens to you, you can use the solutions provided in this post.

Fix Error saving wireless profile message on Windows 11/10

If while creating a new network profile or deleting the existing one, or viewing the properties of your network connection, you see the “Error saving wireless profile” error message, use the fixes written below.

Install the latest Windows Update

Repair corrupted system files

Run antimalware and antivirus scans

Troubleshoot in a Clean Boot state

Uninstall and reinstall your network driver

Reset your WiFi network

Below, we have explained all these fixes in detail.

1] Install the latest Windows Update

You may experience issues like this on your Windows computer if you have an outdated version of Windows 11/10. Hence, make sure that you have the latest version of Windows 11/10. Open Windows 11/10 Settings and go to the Windows Update page to check for updates manually. If an update is available, install it.

2] Repair corrupted system files

Another possible cause of this error is the corrupted system files. Windows 11/10 operating system has built-in tools to repair corrupted system files. You can use the System File Checker and DISM tools to repair your system files. After the process is completed, check if the issue persists.

3] Run antimalware and antivirus scans

If everything sounds fine like you have the latest version of Windows 11/10, your system files are not corrupted or you have repaired your system files, but the error message still appears in internet connection properties, your system might have been infected. You should run an antimalware scan and antivirus scan.

Windows Defender is a good antivirus developed by Microsoft. If you want, you can also use free antivirus software or free standalone on-demand antivirus software to scan your system.

4] Troubleshoot in a Clean Boot state

The error might have been triggered due to a conflicting third-party startup app or third-party Service. To check whether or not this is the case with you, troubleshoot in a Clean Boot state. Start your computer in Clean Boot and see if Windows displays the same error message while creating a new WiFi profile, deleting the existing WiFi profile, or viewing the internet connection properties.

If the issue does not occur in the Clean Boot state, your next step is to find the conflicting third-party startup app or Service. To do so, enable all the disabled startup apps and restart your computer. Now, see if the problem persists. If yes, start disabling the apps one by one and restart your computer every time you disable one startup app. This will help you identify the problematic startup app. Follow the same procedure to identify the conflicting third-party Service. Once you find the problematic Service, disable it permanently by using the Services app.

Some affected users found the SafetyNutManager process causing the problem.

5] Uninstall and reinstall your network driver

You can also try reinstalling your network driver and see if it helps. The steps are as follows:

Open the Device Manager.

Expand the Network adapters branch.

Restart your computer.

On the restart, Windows will look for missing drivers and install them.

6] Reset your WiFi network

We also suggest you reset your WiFi network. This action will reset the networking components to default and reinstall the network adapters. A network reset on Windows 11/10 is useful if you are experiencing issues with your internet connection.

I hope this helps.

Fix 0X81F40001 Microsoft Visual C++ Error On Windows 11/10

The Microsoft Visual C++ error 0x81f40001 may occur for some Windows users when installing Microsoft Visual C++ redistributable package on Windows 11 or Windows 10 computer. This post provides the most adequate solutions affected PC users can apply to fix the error on their system.

When you encounter this issue, you’ll receive the following full error message;

Microsoft Visual C++ Redistributable (x64) Setup Failed, Error 0x81f40001

One or more issues caused the setup to fail. Please fix the issues and then retry setup. For more information see the log file.

Microsoft Visual C++ error 0x81f40001

If the Error 0x81f40001 has occurred on your Windows 11/10 device when installing Microsoft Visual C++, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue on your system.

Run Program Install and Uninstall Troubleshooter

Check system architecture

Run Installer in Compatibility Mode

Let’s take a look at the description of the process involved concerning each of the listed solutions.

Before you try the solutions below, check for updates and install any available pending bits on your Windows 11/10 device and see if the error reappears when you try the Visual C++ install operation again.

1] Run Program Install and Uninstall Troubleshooter

The Program Install and Uninstall troubleshooter fixes corrupted registry keys and is designed to help PC users automatically repair issues related to installing or removing programs on Windows 11/10 system.

This solution requires you to run the Program Install and Uninstall Troubleshooter from Microsoft and see if that helps to fix the Microsoft Visual C++ setup Error 0x81f40001 that has occurred on your device.

2] Check system architecture

Most affected users that encountered this error on their Windows 11/10 system were trying to run the Visual C++ Redistributable Package (x64) installer on a 32-bit system. In this case, to resolve the issue at hand, you need to check system architecture, and then download and run the appropriate package installer for your system.

3] Run Installer in Compatibility Mode

Even though it’s stated on the installer error prompt that the redistributable package in question can only be installed on Windows XP SP1 (x64) and newer platforms, it’s possible that for some reason the Windows 11/10 system is detecting the installer as old program, and as such creating a conflict. In this case, you can Clean Boot your system, and then, in that state, run the package installer in Compatibility Mode and see if the error is fixed.

To run the package installer in Compatibility Mode on your PC, do the following:

Open File Explorer.

Choose Properties.

Navigate to the Compatibility tab.

Now, check the Run this program in compatibility mode for option.

Choose Windows 7 or 8 from the drop-down menu.

Check the Run this program as an administrator option.

Now, check if the issue is resolved. If not, you can run the Program Compatibility Troubleshooter and see if that resolves the issue.

Hope this helps!

How do I fix Microsoft Visual C++ redistributable?

If you’re experiencing Microsoft Visual C++ redistributable package issue on your Windows 11/10 computer, you can try the following simple and basic fix:

Press the Windows key + I to open the Settings app.

Now, scroll down on the Apps & features right pane.

Select Modify.

Follow the on-screen instructions to finish the repair operation.

Do I need all Visual C++ redistributable?

For a fact, you do need all Microsoft Visual C++ Redistributable – these are the standard distributable package of shared code that ships with the Windows operating system and enables apps to run properly on your PC. Deleting or removing any Visual C++ redistributable can make some applications stop working as those applications would be using it.

Fix Remote Desktop Error Code 0X104 On Windows 11/10

The Remote Desktop Error Code 0x104 on Windows 11/10 occurs when you try to give access to the system that is available on the same or on another network. But when it fails, you may see an error message that states –

We couldn’t connect to the remote PC because the PC can’t be found. Please provide the fully-qualified name or the IP address of the remote PC, and then try again. Error Code 0x104

This issue can be highly complicated. Some users who are trying to connect their remote servers also experienced the failure of internet connections. However, here are some easy methods that may help you to get rid of this mess.

Fix Remote Desktop Error Code 0x104

To fix Remote Desktop Error Code 0x104 on your computer follow these suggestions:

Turn on Network Discovery

Allow Port 3389 in the Windows Defender Firewall

Clear Custom DNS Servers

Let us see them in detail.

1] Turn on Network Discovery

Network discovery is a feature that allows your computer to identify additional devices available on the same network. This makes it easy to share files and printers between the networks you want. In order to set up the RDP connection, you must have to ensure whether this option is enabled or not. So, let’s see how to turn on Network Discovery:

Open the Control Panel and in the search box, type in Network and Internet.

Press Enter and on the next page, select the Network and Sharing Center option.

Expand the network profile that is currently being used to your network connection.

After that, select the radio button next to Turn on network discovery.

Finally, hit Save changes button.

2] Allow Port 3389 in the Windows Firewall

TCP port 3389 is the default port that is used for the Windows Remote Desktop Protocol. This port is also used in the Windows Firewall to connect other devices available either on the same network or different networks. However, if the Windows Firewall blocks this, you won’t be able to give access to them.

To make a connection, you need to allow port 3389 in the Windows Firewall. Here is how to do it:

Open the Control Panel window, select the System item.

From the left pane of the next screen, select the Remote settings link. This will open the System Properties wizard where ensure that you’re on the Remote tab.

Under the Remote Desktop section, mark the checkbox next to Allow remote connections to this computer.

Now, again open the Control Panel window and select Windows Defender Firewall item.

From the left pane, select the Advanced settings link. On the next screen, select Inbound Rules.

Move to the right pane and then search for Remote Assistance (RA Server TCP-In) under the Name column.

Once you find it, make sure it is enabled.

Now find out Remote Desktop – User Mode (TCP-In) and Remote Desktop – User Mode (UDP-In).

Make sure both options are enabled and 3389 is the Local Port. In order to make the local port visible, drag the horizontal scroll bar towards the right end.

After that, try to set the connection again and check if the Error Code 0x104 is resolved now.

3] Clear Custom DNS Servers to fix Error Code 0x104

If enabling Network Discovery doesn’t fix the problem, you may try to resolve it by clearing the custom DNS server before setting up the remote connection. It is easily applicable to both the host and target systems. Let’s try to clear custom DNS servers. To do it –

Open WinX menu using Windows+X keyboard shortcut.

On the Network Connections page, look for your adapter.

On the respective properties wizard, make sure you’re on the Networking tab.

Thereupon, mark the checkbox next to Internet Protocol Version 4 and then select the Properties button.

Also, make sure Obtain DNS server address automatically is selected.

How do I fix error 0x104?

To fix Remote Desktop error 0x104 in Windows 11/10, you need to turn on Network Discovery, remove custom DNS servers, allow port 3389 in the Windows Defender Firewall, etc.

How do I fix a remote desktop error?

Although it depends on the particular error you are getting, in most cases, you need to remove custom DNS servers, set Network Profile as Public, remove all the port-related restrictions, etc. However, if you get Remote Desktop can’t find the computer problem, you can follow this detailed tutorial.

Why is my remote desktop not connecting?

If the Remote Desktop is not connecting or detecting your computer, you need to turn on Network Discovery and set the Network Profile type as Public. Otherwise, you cannot use this functionality on your computer.

Let us know if this guide helped you to solve the problem.

Fix Outlook Error Too Many Recipients On Windows 10/11

Fix Outlook Error Too Many Recipients on Windows 10/11




Microsoft Outlook is one of the most popular email client software available on a wide range of devices.

After sending multiple emails in bulk, Outlook might receive a response of Too many invalid recipients, usually followed by Error 550. See how to fix this in the article.

The Outlook troubleshooting section contains a lot more of these types of articles.

Many more fixes can be found in our dedicated Outlook Fix section that you can deal with easily by following the instructions.

Are you getting an Outlook error that says there are too many recipients? Well, the first thing to know about this error is that it happens when a distribution list is too big, and people who regularly use distribution lists to manage and/or send emails are prone to receiving this error.

The error, which is displayed as Error 550 Too many invalid recipients occurs when you attempt to send a message to multiple users or email addresses, that are no longer valid, from Outlook, and eventually, the message doesn’t get to the intended recipients.

But what really is the maximum number of recipients you can send messages to at a go using Outlook? First of all, the Outlook error too many recipients message isn’t generated by Outlook itself, but comes from your internet service provider (ISP), or your corporate mail administrator in the form of a send/receive error.

This is because Outlook doesn’t have a limit on the number of addresses you can send to in one single message or email.

However, your ISP or corporate mail admin can set limits or a combination of limits on the number of emails you can send in an hour or day and the number of recipients for a single email in a bid to protect the mail server from abuse or excessive use.

But this is something you’d then have to check with your ISP or corporate mail admin to avoid getting the error in future messages.

One of the easiest ways of dealing with this error is by first creating a distribution list that has an optimum number of email addresses, though you can find out from your mail admin or ISP about the limits on the number of emails you can send. In this way, you can avoid receiving the Outlook error too many recipients next time you send multiple emails.

Otherwise, you can try some of the solutions listed below if the error persists.

Fix: Outlook error too many recipients 1. Make a new profile and account on Outlook

Open Control panel

Select Mail

Delete the Outlook profile

Restart your computer and open Outlook again

Make a new profile and a new account

If the account is an Exchange, connect to the exchange server

If it isn’t Exchange, use the manual account setup to connect the PST file, otherwise back up the PST file first

Note: Making a new profile should not damage the PST file.

If creating a new Outlook profile or account doesn’t fix the Outlook error too many recipients, make a new test Windows User Profile (account) by logging into the new Windows account, set up Outlook and test it again.

2. Check with your ISP

If you get Outlook error too many recipients, there could be an email reputation issue and your ISP probably doesn’t want to admit it.

In this case, check your ISP’s domain reputation, block reputation, and your assigned address reputation from sites like chúng tôi chúng tôi chúng tôi or

3. Work with or around the email limitations

To do this, there are several methods that come in handy including:

Using a Mail Merge

Use a Mail merge add-in to break mail merge into batches below the email limitation

Consider using a third party app or service for mass mailings or distribution lists

Get an upgrade on your subscription from your ISP and ask about possibilities that such an upgrade comes with, look out for email allowances or limitations

Check with your corporate mail administrator for a specific mail address you can use to send out large distribution lists or mailings, and/or remove the limits on your account temporarily. You can also schedule the list to go out or run later in the night

Verify your account through SMS to allow you to temporarily go beyond the set limit on sending emails or messages

Was this page helpful?


Start a conversation

Update the detailed information about Fix Kernel Mode Heap Corruption Bsod On Windows 11/10 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!