Trending February 2024 # Fix Loadlibrary Failed With Error 126, 1114 Or 1455 On Windows 11/10 # Suggested March 2024 # Top 11 Popular

You are reading the article Fix Loadlibrary Failed With Error 126, 1114 Or 1455 On Windows 11/10 updated in February 2024 on the website Kientrucdochoi.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix Loadlibrary Failed With Error 126, 1114 Or 1455 On Windows 11/10

The Loadlibrary failed with error 126, 1114 or 1455 has been with Windows since years, and there are reports that people are still facing the problem even in the latest Windows 11. The error message occurs upon launching an application on Windows PC. the accompanying messages may be:

The specified modue could not be found

A dynamic link library (dll) initialization routine failed

There’s a long list of applications affected by this error message. But the most popular among them are:

Adobe Suite

BlueStacks

Minecraft

Microsoft Remote Desktop

Virtual Box

Steam

Logitech peripherals

Civilization VI

It’s easy to troubleshoot this problem. Continue with the guide to solve the issue on your system.

What is LoadLibrary?

Says Microsoft – LoadLibrary can be used to load a library module into the address space of the process and return a handle that can be used in GetProcAddress to get the address of a DLL function. LoadLibrary can also be used to load other executable modules. In short – it is a critical OS process that is need to work properly.

What causes the Loadlibrary failed with error on Windows PC

There can be multiple reasons behind the Loadlibrary failed with error 126, 1114 or 1455 in Windows 11/10. But among all, the major reasons triggering the problem are mentioned below.

If you haven’t provided the problematic applications with administrative rights, you will most likely face the mentioned problem.

Not having the latest graphics driver update can be another major reason behind the problem. Additionally, a corrupted driver can also trigger the issue.

If your system features two graphics cards, the problematic application will try to use both of them simultaneously, which will directly cause different problems, including the one in question.

If the Windows file has been corrupted, you will face the Loadlibrary failed with error on your Windows PC.

Now that you have a piece of prior knowledge about different reasons causing the problem let’s check out how to eliminate them.

Loadlibrary failed with error 126, 1114 or 1455

Below is a list of all the effective solutions you can try to fix Loadlibrary failed with error 126, 1114 or 1455 on Windows PC.

Restart the application and PC

Run the application in administrator mode

Copy the DLL file to the System32 folder

Close unnecessary background running applications

Run the SFC scan

Download the latest Graphics Driver update

Now, let’s take a look at all these solutions in detail.

1] Restart the application and PC

To begin with, restart the problem at the application all over again. But make sure none of the associated services is running in the background. You can check it by opening the Task Manager and closing all the services associated with the problematic application. Once done, check if the problem is solved or not.

If you are still facing the problem, you can go with restarting the system. As it turns out, the error message can appear due to a temporary glitch. And the best thing you can do to eliminate such glitches is restart your system. Do it, and see if there’s any difference.

2] Run the application in administrator mode

As mentioned, the major reason behind the problem can be the lack of administrative privileges. Most of the applications that throw the mentioned error needs administrative rights to perform normally. But if this isn’t the case, i.e., you haven’t provided the rights, you will face different issues, including the one you’re currently facing. So, grant administrative rights to the application and check if the problem is solved.

Open the Start Menu by pressing the Windows key.

In the space provided, type the name of the problematic application and press Enter.

Select Run this program as an administrator.

Now, restart your system, and launch the application. Check if you’re still facing the problem. If yes, try the next solution.

3] Copy the DLL file to the System32 folder

You will face the mentioned problem if the important DLL files are missing from the System32 folder. To solve the problem, you will have to copy-paste the DLL file to the required folder. Here are the steps you need to follow.

Open the Run dialogue box by pressing Windows + R shortcut key.

Copy-paste the below-mentioned location and press the enter key.

C:WindowsSystem32DriverStoreFileRepositoryu0352938.inf_amd64_e098709f94aef08dB352876

In the folder, copy the chúng tôi file and paste it in the following location.

C:Windowssystem32

Once done, restart your system and launch the application. Check if the problem continues.

See: Fix chúng tôi not found or missing error

Now, check if the problem persists. If yes, continue with the guide.

5] Run the SFC scan

You can run the SFC scan on your Windows PC to fix the Loadlibrary failed with error 126. The SFC scan helps to scan and restore corrupt Windows system files. You can run the SFC scan by following the below steps.

Open Command Prompt in administrator mode.

Type the following command and press enter. sfc /scannow

Wait until the command is executed. Once done, check for the problem.

See: Fix Wireless Display Install Failed Error

6] Download the latest Graphics Driver update

The mentioned error can be caused due to updated or corrupted graphics driver. In either case, the best thing you can do is download the latest graphics driver update. Here are the steps you need to follow to get the work done.

Check Optional Updates to update the driver.

Go to the manufacturer’s website and download your driver.

Update your driver from the Device Manager.

Install the downloaded driver on your system, followed by a simple restart.

Read: Access is Denied error while installing software

How do you fix error code 126 on Minecraft?

It’s very easy to troubleshoot the error code 126 on Minecraft. You can try either of these steps to solve the problem: Run Minecraft in administrator mode, perform Clean Boot, Run SFC scan, and download the latest graphics driver update. If nothing works, you can reinstall the game to solve the problem.

What is Loadlibrary failed with Error 87?

The Loadlibrary failed with Error 87 occurs due to machine graphics card configuration. In layman’s terms, the problem indicates that you need to download the latest graphics driver update. It’s very easy to troubleshoot Loadlibrary failed with Error 87.

Read Next: Event ID 307 and 304 with error code 0x801c001d.

You're reading Fix Loadlibrary Failed With Error 126, 1114 Or 1455 On Windows 11/10

Io1 Initialization Failed Blue Screen Error On Windows 11/10

If you’re encountering IO1_INITIALIZATION_FAILED Blue Screen error on your Windows 11/10 device, then this post is intended to help you with the solutions that can help you fix this issue.

The IO1_INITIALIZATION_FAILED bug check has a value of 0x00000069. This bug check indicates that the initialization of the I/O system failed for some reason. Most likely, the setup routine has improperly installed the system, or a user has reconfigured the system.

This error appears mostly due to the instability of BIOS, damaged registry values, an abnormal change in default settings, driver issues, and faulty users’ data. Furthermore, you can expect the same snag because of downloading some unauthorized application, faulty and missing system files as well as bad sectors in the hard disk. Since the accurate cause is unknown like all other blue screen errors, it’s really hard to apply an appropriate workaround.

IO1_INITIALIZATION_FAILED BSOD

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Run the Blue Screen Online Troubleshooter

Update drivers

Rebuild BCD

Change the Disk Controller mode to SATA or ATA from RAID/AHCI

Set useplatformclock to True

Perform System Restore.

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run the Blue Screen Online Troubleshooter

This solution requires you to the Blue Screen Online Troubleshooter from Microsoft. It helps beginners & novice users troubleshoot their Blue Screens and fix the stop error automatically.

2] Update drivers

Faulty or outdated drivers may cause this Blue Screen error as well.

In this case, you can either update your drivers manually via the Device Manager, you can get the driver updates on the Optional Updates section under Windows Update. You may also automatically update your drivers.

3] Rebuild BCD

You may need to rebuild BCD. BCD or Boot Configuration Data contains boot configuration parameters on how to start your OS. You may need to use the CMD via Advanced Startup Options.

4] Change the Disk Controller mode to SATA or ATA from RAID/AHCI

When the HDD controller mode is set to AHCI or RAID and the system lacks appropriate drivers, the system might encounter the error in Windows 10. In order to fix the problem, the disk controller must be interchanged to SATA or ATA.

For that, you have to access the BIOS and make the required changes by following proper guidelines. You can find the proper guidelines in the instruction manual of the motherboard supplied at the time of buying it or check on the internet.

5] Set useplatformclock to True

Do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode.

In the command prompt window, type the command below and hit Enter.

bcdedit /enum

This command will indicate whether the useplatformclock is set to True. If that’s not the case, you can set it to true by typing the command below and hit Enter.

bcdedit /set useplatformclock true

This procedure will make sure HPET (High Precision Event Timer) is on. If this method fails to solve the problem, just try the next one.

6] Perform System Restore

If you noticed that the error started to occur recently, it’s entirely possible that the issue was facilitated by a change that your system has gone through recently.

At this point, if none of the above solutions worked for you, you can restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

Hope this helps!

Fix : Bad_Module_Info Error In Windows 10/11

When the computer is low on resources, like physical and graphic memory, the error “bad_module_info” can pop up, crashing your application. Due to this, you might lose any progress on the application/games.

To fix the crash, you should know the error that is displayed in the crash-dialog box. If the error says “bad_module_info has stopped working”, you can find a few of the causes and their solutions below.

Bad_module_info is a type of error that can show up while running games or applications. Low memory on the graphics card can lead to these crashes while running some graphics-heavy tasks. Corrupted files can also cause your applications or games to crash mid-session.

The main reason we see the “bad_module_info” is if the computer is low on primary memory (especially RAM) and graphics memory. Now, let us get to some reasons your computer is low on resources. 

Multiple graphics-heavy tasks in the background

Full-screen optimization enabled

Problems with Windows update

Outdated graphics driver

Application not compatible with the Windows version

Game mode and Xbox game bar enabled

First, make sure that the computer has enough primary and graphics memory to run the application. Check the minimum system requirements for the applications. If the application still crashes despite having enough resources, you can opt for any of these solutions.

When any game runs on maximum FPS (Frames Per Second), it uses a lot of physical and video memory. Try limiting the in-game FPS for less resource consumption. For most games, you can limit the maximum FPS in video settings. 

The Fullscreen Optimization feature in Windows allows you to improve the FPS and performance of your game when it runs on full screen. This option is on by default for any games that run on full screen. However, this can also be one of the reasons for the error message. So, to disable this feature, you can follow these steps.

The executable file will be a .exe file with no shortcut sign on the icon. To find the executable file follow these steps.

A file explorer dialog box will now appear. Some games will have the .exe file on this dialog box. If you cannot find it, search inside the folders for the file.

Note: Your in-game FPS will decrease once you disable this feature.

While you are on this screen, enable the run as administrator option. Running a program as an admin gives the computer more resources to run the application.

If the application is old, it might not be compatible with the latest Windows. The Compatibility Mode allows older applications to operate on newer versions of Windows. To run a program on different compatibility modes, follow these steps.

Sometimes a bad Windows update can cause some incompatibility issues between the OS (Operating System) and the application. You can use the Windows Update Troubleshooter to find and fix any issues with the Windows update.

Restart the computer once it finishes the troubleshooting process. If the game still crashes with the error bad_module_info, you can revert to the previous stable version.

If the Windows Update Troubleshooter did not fix your issue with the update, you can always uninstall the recent updates. Follow these steps to uninstall Windows updates.

If you have some graphic-heavy process running in the background, the computer can run out of physical and graphics memory. To close the background applications, you can follow these steps.

Some applications may not be compatible with your Windows, which can cause the bad_module_error. The Program Compatibility Troubleshooter checks and repairs your program that is incompatible with the version of your windows. Follow these steps to run the Program Compatibility Troubleshooter. 

Game Mode is a feature in Windows that boosts your in-game performance by limiting the resource used by the background process. Xbox game bar is a tool that streams your gameplay, captures your gameplay with a press of a button. 

Sometimes, a Windows update or any driver update can cause the Game mode or Xbox game bar to malfunction which causes the error. You can follow these steps to disable the Windows Game Mode and Xbox Game Bar.

When a game runs on full-screen windowed mode, it doesn’t use high resources. Therefore, you can run your games with a slight decrease in performance.

To enter a full-screen mode in any game, go to video settings and select display mode to Windowed Fullscreen.

If a computer running an application runs low on memory, you might get the bad_module_info error. If you have an outdated driver, updating it might help with resource management. To update your GPU drivers, you can follow these steps.

If you face the bad_module_info crash on Fortnite, you can disable the full-screen optimization of the Epic Games launcher. As Epic Games runs in the background while running Fortnite, disabling this option can solve the issue.

To go to Epic Games Launcher executable file, follow these steps.

When the crash error pops up, check if the game still runs in the background. If it does, you can follow these steps.

Go to video settings once the game opens. 

Change the window mode to windowed fullscreen. 

Apply the settings and close Fortnite.

Open Fortnite. (the crash will pop up again. Ignore this and set the crash message dialog box to the side)

Again change the Window mode setting from Windowed Fullscreen to Fullscreen.

This will put Fortnite in the foreground and the crash message in the background. This will make your game playable even with the crash.

Validating any steam games will repair any corrupted files and check if all files are up-to-date. These corrupted files can cause errors, like loading screen glitches, crashes (bad_modle_info). To validate your steam games, please follow these steps.

Fix Error Saving Wireless Profile Message On Windows 11/10

While viewing the internet connection properties, some users received the “Error saving wireless profile” message. The same error message can also occur while setting up a new or deleting the existing network profile on Windows 11/10. If you see this error message, this guide will show you how to deal with this problem.

The complete error message is:

Error saving wireless profile – Windows has encountered an error saving the wireless profile. Specific error: The system cannot find the file specified.

What is a WiFi profile name?

A wireless network profile or WiFi profile contains information, like SSID, password, etc. Your computer uses this information to connect to the internet. SSID (Service Set IDentifier) is the name of a network. When you open WiFi on your computer or smartphone, the list of networks that you see is SSIDs.

How do I add a profile to my WiFi?

Windows 11/10 allows users to create new WiFi network profiles. You can do this by using the Settings app or the Control Panel. While setting up a new network profile, you have to enter the network name, security type, and security key. As explained earlier, some users receive the “Error saving wireless profile” message while creating a new network profile. If the same thing happens to you, you can use the solutions provided in this post.

Fix Error saving wireless profile message on Windows 11/10

If while creating a new network profile or deleting the existing one, or viewing the properties of your network connection, you see the “Error saving wireless profile” error message, use the fixes written below.

Install the latest Windows Update

Repair corrupted system files

Run antimalware and antivirus scans

Troubleshoot in a Clean Boot state

Uninstall and reinstall your network driver

Reset your WiFi network

Below, we have explained all these fixes in detail.

1] Install the latest Windows Update

You may experience issues like this on your Windows computer if you have an outdated version of Windows 11/10. Hence, make sure that you have the latest version of Windows 11/10. Open Windows 11/10 Settings and go to the Windows Update page to check for updates manually. If an update is available, install it.

2] Repair corrupted system files

Another possible cause of this error is the corrupted system files. Windows 11/10 operating system has built-in tools to repair corrupted system files. You can use the System File Checker and DISM tools to repair your system files. After the process is completed, check if the issue persists.

3] Run antimalware and antivirus scans

If everything sounds fine like you have the latest version of Windows 11/10, your system files are not corrupted or you have repaired your system files, but the error message still appears in internet connection properties, your system might have been infected. You should run an antimalware scan and antivirus scan.

Windows Defender is a good antivirus developed by Microsoft. If you want, you can also use free antivirus software or free standalone on-demand antivirus software to scan your system.

4] Troubleshoot in a Clean Boot state

The error might have been triggered due to a conflicting third-party startup app or third-party Service. To check whether or not this is the case with you, troubleshoot in a Clean Boot state. Start your computer in Clean Boot and see if Windows displays the same error message while creating a new WiFi profile, deleting the existing WiFi profile, or viewing the internet connection properties.

If the issue does not occur in the Clean Boot state, your next step is to find the conflicting third-party startup app or Service. To do so, enable all the disabled startup apps and restart your computer. Now, see if the problem persists. If yes, start disabling the apps one by one and restart your computer every time you disable one startup app. This will help you identify the problematic startup app. Follow the same procedure to identify the conflicting third-party Service. Once you find the problematic Service, disable it permanently by using the Services app.

Some affected users found the SafetyNutManager process causing the problem.

5] Uninstall and reinstall your network driver

You can also try reinstalling your network driver and see if it helps. The steps are as follows:

Open the Device Manager.

Expand the Network adapters branch.

Restart your computer.

On the restart, Windows will look for missing drivers and install them.

6] Reset your WiFi network

We also suggest you reset your WiFi network. This action will reset the networking components to default and reinstall the network adapters. A network reset on Windows 11/10 is useful if you are experiencing issues with your internet connection.

I hope this helps.

Fix 0X81F40001 Microsoft Visual C++ Error On Windows 11/10

The Microsoft Visual C++ error 0x81f40001 may occur for some Windows users when installing Microsoft Visual C++ redistributable package on Windows 11 or Windows 10 computer. This post provides the most adequate solutions affected PC users can apply to fix the error on their system.

When you encounter this issue, you’ll receive the following full error message;

Microsoft Visual C++ Redistributable (x64) Setup Failed, Error 0x81f40001

One or more issues caused the setup to fail. Please fix the issues and then retry setup. For more information see the log file.

Microsoft Visual C++ error 0x81f40001

If the Error 0x81f40001 has occurred on your Windows 11/10 device when installing Microsoft Visual C++, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue on your system.

Run Program Install and Uninstall Troubleshooter

Check system architecture

Run Installer in Compatibility Mode

Let’s take a look at the description of the process involved concerning each of the listed solutions.

Before you try the solutions below, check for updates and install any available pending bits on your Windows 11/10 device and see if the error reappears when you try the Visual C++ install operation again.

1] Run Program Install and Uninstall Troubleshooter

The Program Install and Uninstall troubleshooter fixes corrupted registry keys and is designed to help PC users automatically repair issues related to installing or removing programs on Windows 11/10 system.

This solution requires you to run the Program Install and Uninstall Troubleshooter from Microsoft and see if that helps to fix the Microsoft Visual C++ setup Error 0x81f40001 that has occurred on your device.

2] Check system architecture

Most affected users that encountered this error on their Windows 11/10 system were trying to run the Visual C++ Redistributable Package (x64) installer on a 32-bit system. In this case, to resolve the issue at hand, you need to check system architecture, and then download and run the appropriate package installer for your system.

3] Run Installer in Compatibility Mode

Even though it’s stated on the installer error prompt that the redistributable package in question can only be installed on Windows XP SP1 (x64) and newer platforms, it’s possible that for some reason the Windows 11/10 system is detecting the installer as old program, and as such creating a conflict. In this case, you can Clean Boot your system, and then, in that state, run the package installer in Compatibility Mode and see if the error is fixed.

To run the package installer in Compatibility Mode on your PC, do the following:

Open File Explorer.

Choose Properties.

Navigate to the Compatibility tab.

Now, check the Run this program in compatibility mode for option.

Choose Windows 7 or 8 from the drop-down menu.

Check the Run this program as an administrator option.

Now, check if the issue is resolved. If not, you can run the Program Compatibility Troubleshooter and see if that resolves the issue.

Hope this helps!

How do I fix Microsoft Visual C++ redistributable?

If you’re experiencing Microsoft Visual C++ redistributable package issue on your Windows 11/10 computer, you can try the following simple and basic fix:

Press the Windows key + I to open the Settings app.

Now, scroll down on the Apps & features right pane.

Select Modify.

Follow the on-screen instructions to finish the repair operation.

Do I need all Visual C++ redistributable?

For a fact, you do need all Microsoft Visual C++ Redistributable – these are the standard distributable package of shared code that ships with the Windows operating system and enables apps to run properly on your PC. Deleting or removing any Visual C++ redistributable can make some applications stop working as those applications would be using it.

Fix Remote Desktop Error Code 0X104 On Windows 11/10

The Remote Desktop Error Code 0x104 on Windows 11/10 occurs when you try to give access to the system that is available on the same or on another network. But when it fails, you may see an error message that states –

We couldn’t connect to the remote PC because the PC can’t be found. Please provide the fully-qualified name or the IP address of the remote PC, and then try again. Error Code 0x104

This issue can be highly complicated. Some users who are trying to connect their remote servers also experienced the failure of internet connections. However, here are some easy methods that may help you to get rid of this mess.

Fix Remote Desktop Error Code 0x104

To fix Remote Desktop Error Code 0x104 on your computer follow these suggestions:

Turn on Network Discovery

Allow Port 3389 in the Windows Defender Firewall

Clear Custom DNS Servers

Let us see them in detail.

1] Turn on Network Discovery

Network discovery is a feature that allows your computer to identify additional devices available on the same network. This makes it easy to share files and printers between the networks you want. In order to set up the RDP connection, you must have to ensure whether this option is enabled or not. So, let’s see how to turn on Network Discovery:

Open the Control Panel and in the search box, type in Network and Internet.

Press Enter and on the next page, select the Network and Sharing Center option.

Expand the network profile that is currently being used to your network connection.

After that, select the radio button next to Turn on network discovery.

Finally, hit Save changes button.

2] Allow Port 3389 in the Windows Firewall

TCP port 3389 is the default port that is used for the Windows Remote Desktop Protocol. This port is also used in the Windows Firewall to connect other devices available either on the same network or different networks. However, if the Windows Firewall blocks this, you won’t be able to give access to them.

To make a connection, you need to allow port 3389 in the Windows Firewall. Here is how to do it:

Open the Control Panel window, select the System item.

From the left pane of the next screen, select the Remote settings link. This will open the System Properties wizard where ensure that you’re on the Remote tab.

Under the Remote Desktop section, mark the checkbox next to Allow remote connections to this computer.

Now, again open the Control Panel window and select Windows Defender Firewall item.

From the left pane, select the Advanced settings link. On the next screen, select Inbound Rules.

Move to the right pane and then search for Remote Assistance (RA Server TCP-In) under the Name column.

Once you find it, make sure it is enabled.

Now find out Remote Desktop – User Mode (TCP-In) and Remote Desktop – User Mode (UDP-In).

Make sure both options are enabled and 3389 is the Local Port. In order to make the local port visible, drag the horizontal scroll bar towards the right end.

After that, try to set the connection again and check if the Error Code 0x104 is resolved now.

3] Clear Custom DNS Servers to fix Error Code 0x104

If enabling Network Discovery doesn’t fix the problem, you may try to resolve it by clearing the custom DNS server before setting up the remote connection. It is easily applicable to both the host and target systems. Let’s try to clear custom DNS servers. To do it –

Open WinX menu using Windows+X keyboard shortcut.

On the Network Connections page, look for your adapter.

On the respective properties wizard, make sure you’re on the Networking tab.

Thereupon, mark the checkbox next to Internet Protocol Version 4 and then select the Properties button.

Also, make sure Obtain DNS server address automatically is selected.

How do I fix error 0x104?

To fix Remote Desktop error 0x104 in Windows 11/10, you need to turn on Network Discovery, remove custom DNS servers, allow port 3389 in the Windows Defender Firewall, etc.

How do I fix a remote desktop error?

Although it depends on the particular error you are getting, in most cases, you need to remove custom DNS servers, set Network Profile as Public, remove all the port-related restrictions, etc. However, if you get Remote Desktop can’t find the computer problem, you can follow this detailed tutorial.

Why is my remote desktop not connecting?

If the Remote Desktop is not connecting or detecting your computer, you need to turn on Network Discovery and set the Network Profile type as Public. Otherwise, you cannot use this functionality on your computer.

Let us know if this guide helped you to solve the problem.

Update the detailed information about Fix Loadlibrary Failed With Error 126, 1114 Or 1455 On Windows 11/10 on the Kientrucdochoi.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!