Trending December 2023 # Fix No_User_Mode_Context Blue Screen Of Death On Windows # Suggested January 2024 # Top 14 Popular

You are reading the article Fix No_User_Mode_Context Blue Screen Of Death On Windows updated in December 2023 on the website Kientrucdochoi.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix No_User_Mode_Context Blue Screen Of Death On Windows

The NO USER MODE CONTEXT, 0x0000000E stop error can occur when a program is trying to leverage the use of a system driver but fails to do so. Some of the causes of NO USER MODE CONTEXT bluescreen of death error are corrupted or incompatible drivers, incorrectly configured Windows Registry entries, Malware infection, damaged memory locations, etc. This Stop Error occurs infrequently and indicates that an attempt to enter user mode with no context was made.

Fix NO_USER_MODE_CONTEXT Blue Screen

If this is the first time you have restarted after installing additional hardware, remove the hardware and restart again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with your OS. If that does not help, then the following potential fixes will be carried out to fix NO_USER_CONTEXT stop error on Windows 10-

Update, Rollback or Disable certain Drivers.

Run System File Checker.

Use Windows Memory Diagnostics

If you tend to create a System Restore point usually, you can try to undo any modifications on your computer, by performing System Restore. It is also recommended that you carry out the tasks mentioned below in Safe Mode.

1] Update, Rollback or Disable select Drivers

The best practice for you should be to go to the website of your manufacturers like NVIDIA, AMD or Intel. Go to the section called Drivers and download the latest definitions from there.

After the download has been completed, just install the graphics driver and reboot your computer.

Alternatively, after booting into the Safe Mode, open Device Manager.

The main drivers that might be a cause for this Blue Screen will be listed under the section of Display Adapters inside of the Device Manager. So if you recently updated these drivers, roll back and see. If you did not, then we suggest you update these drivers.

2] Run System File Checker sfc /scannow

Restart your system after the scan is completed.

3] Use Windows Memory Diagnostics

In order to fix any issues with your RAM, follow the following steps.

Run the Memory Check on your computer. Start by hitting the WINKEY + R button combination to launch the Run utility. Then type in, chúng tôi and then hit Enter. It will launch the Windows Memory Diagnostic Tool and will give out two options-

Restart now and check for problems (Recommended)

Check for problems the next time I start my computer

Now, according to the option selected by you, the computer will restart and check for memory-based problems. If you get any issues there, it will fix it automatically else if no issues are detected, this is probably not the cause of the issue.

Can a PC blue screen for no reason?

A Blue Screen occurs due to hardware or software issues. You will no longer see a blue screen until Windows detects a critical hardware or software fault on your system. A BSOD can be an indication of damage to a hardware or a hardware component, like RAM, hard disk, etc. In some cases, BSOD can also occur due to a corrupted device driver.

Can a blue screen fix itself?

Hardware and software issues are responsible for a blue screen on Windows computers. When a blue screen occurs, your computer displays an error message and restarts automatically. If there is a serious hardware issue, the blue screen keeps occurring. A BSOD error cannot be fixed by itself. You have to troubleshoot the BSOD error to resolve the issue. To troubleshoot the BSOD error, you can view the BSOD log file created by Windows.

You're reading Fix No_User_Mode_Context Blue Screen Of Death On Windows

Fix Pink Screen Of Death Error In Windows 11/10

The Blue Screen of Death is one of the most common software issues on Windows computers. Most of you must’ve had to deal with it at some point of using your PC. Another issue, one that many of you may not be aware of, is the Pink Screen of Death. Like the BSOD, this issue occurs when your PC goes through software and hardware failures. Like BSOD, the screen goes pink every time it occurs. In this article, we will discuss the various measures you can take to fix the Pink Screen of Death issue in Windows 11/10.

Fix Pink Screen of Death in Windows 11/10

The Pink Screen of Death occurs in Windows 11 or Windows 10 if the computer is overheating or if there is an issue with your Graphics card Drivers. You may follow these suggestions to resolve the issue:

Install the necessary Graphic card drivers and optional updates

Check the temperature of your graphic card’s GPU

Troubleshoot in Clean Boot State

Use an uninstaller to completely uninstall problematic third-party apps

Show it to a technician.

1] Install the necessary Graphic card drivers and optional updates

It is very likely that this issue has been caused because your computer lacks the necessary Display drivers, and if that is the case, then you need to search for and install them. After the Windows 11 upgrade, you can install drivers from your Windows settings and you don’t need to visit the Device Manager page. Here’s how you can search for optional updates and pending driver updates on Windows 11:

Open Windows Settings with the Win + ‘I’ keyboard shortcut

On the Windows Update page select Advanced options

Here, you’ll see an option with the name Driver updates. If there are any pending updates, they’ll be denoted in parentheses.

Once done, wait and see if the error persists.

Read: Fix Orange Screen of Death on Windows.

 2] Check the temperature of your graphic card’s GPU

If you’re a gamer or someone whose PC usage can be strenuous (maybe your work has something to do with data), then overheating can cause this reaction on your PC. If you think a high GPU temperature is what’s causing this error, check it up. You can do so using the Task Manager or even a third-party software depending on your GPU. Here’s how you can use the Task Manager to check the GPU temperature:

Open the Task Manager and select to view more details

Here, you’ll see the sectional division of the performance of your CPU, D: & E: Disk, GPU, etc.

Read: Fix White Screen of Death on Windows.

3] Troubleshoot in Clean Boot State

Perform a Clean Boot to find out what’s causing this issue to occur and fix it. Here’s how that can be done:

Open the Run command window and enter ‘msconfig’ command

In the General tab, under Selective Startup, select ‘Load startup items’

Clean-boot troubleshooting is designed to isolate a performance problem. To perform clean-boot troubleshooting, you must take a number of actions, and then restart the computer after each action. You may need to manually disable one item after another to try and pinpoint the one that is causing the problem. Once you have identified the offender, you can consider removing or disabling it.

Fix: Green Screen of Death (GSoD) in Windows

4] Use an uninstaller to completely uninstall harmful third-party apps

It is very likely that a third-party app is counteracting your current processes, so you should make sure that any app that you’re unsure about is uninstalled from your PC. Sometimes, these apps can leave behind some corrupt files and registry keys that may cause the error to persist, so take the help of an uninstaller program like Revo, IOBit Uninstaller, etc.

5] Show it to a technician

If nothing helps, you may need to show your computer to a technician – It could be a hardware issue.

Why is my computer screen suddenly pink?

If your computer screen is showing a pink tint then a burn-in caused by LCD crystals not changing polarity can also create this issue. This would be caused by a faulty driver chip inside the screen. Other than this, overheating or a problematic Display driver can cause this issue.

We hope this post was helpful and that you’ve now gotten rid of the Pink Screen of Death issue on your Windows computer.

Read next: Purple, Brown, Yellow, Orange, Red, Green Screen of Death explained.

Fix Fat File System (Fastfat.sys) Blue Screen On Windows 11/10

You may see FAT FILE SYSTEM Blue Screen because of many different reasons such as faulty Hardware, bad sectors in Hard Drive, etc. The main cause is disk corruption in the file system or bad blocks (sectors). Corrupted SCSI and IDE drivers can also cause the error.

In this article, we are going to fix the FAT FILE SYSTEM (fastfat.sys) 0x00000023 Blue Screen on Windows 11/10 with the help of some simple solutions. chúng tôi is a Windows operating system driver file.

The FAT_FILE_SYSTEM bug check has a value of 0x00000023. This indicates that a problem occurred in the FAT file system.

Fix FAT FILE SYSTEM (fastfat.sys) Blue Screen

These are the things you can do to fix FAT FILE SYSTEM (fastfat.sys) Blue Screen on Windows 11/10.

Run CHKDSK

Run Verifier to find Driver Problem

Update drivers using Optional Updates

Repair Windows 10 using Installation Media

Check the Hardware for fault.

Let us talk about them in detail.

You will need to use the Command Prompt. If you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run CHKDSK

As mentioned earlier, the problem can be because of a bad sector in the hard drive. So, to fix it, you have to run the CHKDSK command.

However, before running the command, boot your computer in Clean Boot State or Advanced Option using the Installation Media. Now, open the Command Prompt as an admin in either of the two and run the following command.

chkdsk /f /r

You will be asked to confirm your action, so, hit “Y” to do that.

Finally, boot your computer in a normal state and check if the issue persists.

2] Run Verifier to find Drive Problem

One of the things you can do to fix the error is to run Driver Verifier to find if there’s a problem with the installed drivers.

So, open Command Prompt as an administrator and run the following command.

verifier

Now, wait for the process to complete and your problem will hopefully be resolved.

3] Update drivers using Optional Updates 4] Repair Windows using the installation Media

Another thing you can do to fix the error is to repair your OS with Installation Media. This will fix your OS without deleting any personal files.

5] Check the Hardware for fault

Now this one is meant for hardware experts – so if you are not one, we suggest you consult a hardware technician.

You need to is to check if the error is because of a fault in the Hardware. The chances are that it could be your Hard Disk!

For that, you have to disassemble your PC and then add the component one by one to see which device is faulty.

Remove all the USB ports, external drives, and SD Cards and keep checking for fault.

If you have multiple RAMs, unplug them and plug them one by one to see if one of them has malfunctioned.

Remove one of the SSDs and HDDs, if you have multiple ones, and check for fault.

Hard Drives are usually responsible for these errors, so, pay close attention to this one.

Remove Graphic Card, expect the Integrated one.

Now, start adding the components one by one to recheck if the error is because of them. This may take a while but do not skip a single step.

If you know the reason for the fault, replace that device and you will be good to go.

Related: Fix Windows Stop Errors or Blue Screen of Death.

Io1 Initialization Failed Blue Screen Error On Windows 11/10

If you’re encountering IO1_INITIALIZATION_FAILED Blue Screen error on your Windows 11/10 device, then this post is intended to help you with the solutions that can help you fix this issue.

The IO1_INITIALIZATION_FAILED bug check has a value of 0x00000069. This bug check indicates that the initialization of the I/O system failed for some reason. Most likely, the setup routine has improperly installed the system, or a user has reconfigured the system.

This error appears mostly due to the instability of BIOS, damaged registry values, an abnormal change in default settings, driver issues, and faulty users’ data. Furthermore, you can expect the same snag because of downloading some unauthorized application, faulty and missing system files as well as bad sectors in the hard disk. Since the accurate cause is unknown like all other blue screen errors, it’s really hard to apply an appropriate workaround.

IO1_INITIALIZATION_FAILED BSOD

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Run the Blue Screen Online Troubleshooter

Update drivers

Rebuild BCD

Change the Disk Controller mode to SATA or ATA from RAID/AHCI

Set useplatformclock to True

Perform System Restore.

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run the Blue Screen Online Troubleshooter

This solution requires you to the Blue Screen Online Troubleshooter from Microsoft. It helps beginners & novice users troubleshoot their Blue Screens and fix the stop error automatically.

2] Update drivers

Faulty or outdated drivers may cause this Blue Screen error as well.

In this case, you can either update your drivers manually via the Device Manager, you can get the driver updates on the Optional Updates section under Windows Update. You may also automatically update your drivers.

3] Rebuild BCD

You may need to rebuild BCD. BCD or Boot Configuration Data contains boot configuration parameters on how to start your OS. You may need to use the CMD via Advanced Startup Options.

4] Change the Disk Controller mode to SATA or ATA from RAID/AHCI

When the HDD controller mode is set to AHCI or RAID and the system lacks appropriate drivers, the system might encounter the error in Windows 10. In order to fix the problem, the disk controller must be interchanged to SATA or ATA.

For that, you have to access the BIOS and make the required changes by following proper guidelines. You can find the proper guidelines in the instruction manual of the motherboard supplied at the time of buying it or check on the internet.

5] Set useplatformclock to True

Do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode.

In the command prompt window, type the command below and hit Enter.

bcdedit /enum

This command will indicate whether the useplatformclock is set to True. If that’s not the case, you can set it to true by typing the command below and hit Enter.

bcdedit /set useplatformclock true

This procedure will make sure HPET (High Precision Event Timer) is on. If this method fails to solve the problem, just try the next one.

6] Perform System Restore

If you noticed that the error started to occur recently, it’s entirely possible that the issue was facilitated by a change that your system has gone through recently.

At this point, if none of the above solutions worked for you, you can restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

Hope this helps!

Getting White Screen Of Death On Mac? Try These Fixes • Mactips

Getting White Screen of Death on Mac? Try these fixes

213

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Protect your Mac on all fronts with unrivalled antivirus technology! Intego is a veteran when it comes to Mac security, bringing you well-researched and tested security features to protect your Mac against malware and cyber threats. Here are the most important features:

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

Many MacBook users reported that they can’t access their MacBook due to the White Screen of Death. If you’re getting a white screen while trying to boot your MacBook, be sure to try some of our solutions.

How do I get rid of the White Screen of Death on MacBook? 1. Reset SMC and NVRAM

The first thing you want to try if you’re getting a white screen is to reset your SMC and NVRAM. To reset NVRAM, do the following:

Turn off your MacBook and turn it back on.

As soon as you press the Power button, press and hold Option, Command, P, and R keys.

If you hear the startup sound for the second time or if the Apple logo appears and disappears for the second time, release the keys.

To reset SMC on models with the T2 chip, do the following:

Turn off your MacBook.

Press and hold Control, left Option (Alt), and right Shift.

Keep the keys pressed for 7 seconds. Without releasing them, press and hold the Power button.

Keep all four keys pressed for an additional 7 seconds.

Release the keys, wait for a few moments, and start your MacBook.

On models without the T2 chip, you need to do the following:

Shut down your MacBook and hold left Shift, left Control, left Option (Alt).

Press and hold the Power button without releasing the keys from the previous step.

Keep all four keys pressed for about 10 seconds.

Release the keys and start your MacBook again.

2. Use Safe Mode

If you can’t boot to your MacBook due to the white screen, try using Safe Mode instead. To access Safe Mode, do the following:

Start or restart your MacBook and press and hold the Shift key.

When the login window appears, release the Shift key.

Enter your login credentials if required.

After entering the Safe Mode, you can exit it and boot normally. If the issue is still there, the problem might be one of the login items. To remove it, do the following:

Navigate to Users & Groups.

A list of login items will appear. Write them down.

Now remove all login items by using the Remove button.

Restart your MacBook.

If the issue doesn’t appear, you need to add items one by one until you find the one that is causing the problem.

3. Repair the disk

If the white screen appears on your MacBook, you can fix it by repairing the disk. To do that, follow these steps:

Reboot your MacBook and press and hold Command + R keys.

When the Recovery Mode starts, go to Disk Utility.

This guide contains some simple solutions that can help you fix the White Screen of Death on your MacBook. If our solutions didn’t work for you, you can always try reinstalling your macOS.

FAQ: Learn more about MacBook issues

Why is my MacBook showing a white screen?

The white screen you see on your MacBook might be an indication of a faulty hard drive, but could also be caused by an error with your operating system.

How do I do a system restore on a Mac?

Do Macs have restore points?

Yes, Mac does have restore points enabled by default.

Was this page helpful?

x

Malwarebytes Blue Screen: Use These 4 Solutions To Fix It

Malwarebytes Blue Screen: Use These 4 Solutions to Fix it

478

Share

X

Malwarebytes is one of the most popular antivirus tools on earth.

Unfortunately, many users reported BSoD errors and system crashes when using it.

Some said that reinstalling the antivirus tool did the trick for them.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

While incremental security application updates help improve performance, some users still experience several issues, including occasional crashes and blue screens of death.

We will cover that in the article, explaining in great detail what you can do to stop BSoDs caused by running Malwarebytes.

Why is Malwarebytes causing a blue screen?

There can be various reasons why Malwarebytes can cause a blue screen (also known as the “blue screen of death” or BSOD) error on your Windows PC. Some common reasons include the following:

Compatibility issues – If you’re running an older version of Malwarebytes on an outdated version of Windows, it may not be compatible with your system and cause a BSOD error.

Conflicts with other software – Malwarebytes can sometimes conflict with other security software or drivers installed on your system, causing a BSOD error.

Corrupted or outdated drivers – Outdated or corrupted drivers can cause a BSOD error, and Malwarebytes may identify these drivers during a scan and trigger a BSOD error.

Malware or virus infections – Malwarebytes is designed to detect and remove malware and viruses from your system. However, it may cause a BSOD error if it encounters hazardous malware.

We will now explore some of the top recommended solutions.

How can I fix Malwarebyte’s blue screen?

Before you jump into the recommended solutions, consider using another antivirus software. There are many good options, and you may be able to avoid this issue.

You should consider the most reliable antivirus tools on Windows 10 and enhance your security without causing system errors.

1. Reinstall Malwarebytes 2. Turn off Fast Startup 3. Disable any other conflicting antivirus

While Malwarebytes is a complete security solution, some users prefer installing it with other antivirus tools, such as Bitdefender. Still, the problem is that having two antivirus tools can lead to issues.

Many users suggested disabling web filtering in Bitdefender.

Another similar solution would be to disable Web Protection in Malwarebytes since that may also help.

4. Run a third-party BSoD troubleshooter

BSoDs and crashes can be caused by many things, ranging from hardware incompatibilities to software inconsistencies, which makes identifying the problem complicated and time-consuming.

That’s precisely why third-party software solutions are becoming more and more of an acceptable alternative since they run your PC through a complete set of troubleshooting steps with minimal user input.

Moreover, this system repair tool will run a 5-minute free scan and detect the Windows errors caused by other programs or applications on your system.

Thus, you can remove the specified corrupted or malfunctioning software files that determine such BSoD issues. The process is mainly automated, so the job is finished within a few minutes.

⇒ Get Fortect

This pretty much wraps up our troubleshooting guide covering BSoDs triggered when running Malwarebytes.

Let us know which solution you went for by leaving us your feedback below.

Still experiencing issues?

Was this page helpful?

x

Start a conversation

Update the detailed information about Fix No_User_Mode_Context Blue Screen Of Death On Windows on the Kientrucdochoi.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!