Trending February 2024 # How To Backup And Restore Drivers In Windows 11/10 # Suggested March 2024 # Top 11 Popular

You are reading the article How To Backup And Restore Drivers In Windows 11/10 updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Backup And Restore Drivers In Windows 11/10

Device Drivers are software that lets you use anything on PC with the OS. There are drivers for the graphics card, keyboards, mouse, and everything else. Now it may so happen that for some reason a device has stopped working, or is not responding as it should. In that case, the only option is to remove the driver, and reinstall it.  In this guide, we are sharing some of the best methods to Backup and Restore Drivers in Windows 11/10.

While it sounds easy, not everyone has their device drivers available right on the Windows PC. One may have to download it from OEM or let Windows configure it by downloading through the updates. The only solution is to back up the driver so you can use it anytime. This becomes very useful for the old device for which OEMs don’t have the device driver anymore.

How to Backup & Restore Drivers in Windows 11/10

Before we start, to get all of these done, you need Admin privilege with your account. You should know that unless you are very clear about these, do not attempt them. We will start with Windows inbuilt methods, and then suggest some third-party software that has an easy-to-use interface.

Backup Drivers using Command Prompt & PowerShell

We will use the popular tool DISM (Deployment Image Servicing and Management) here. It can both export, and import drivers in bulk.

Create a folder “Driver-Backups” in your PC anywhere on a drive other than where Windows is installed.

Open Command Prompt with admin privileges, and execute the following command-

dism /online /export-driver /destination:"Driver-Backups folder path"

Here and later elsewhere in this post, “Driver-Backups folder path” is the path of the folder you created. If you created this folder on your D drive, then the path would be D:Driver-Backups.

This will export all the drivers in your Windows 10 PC in the folder. It should say – The operation completed successfully. Make sure to keep a backup of that folder in one of your cloud drives.

The driver servicing command supports only .inf files. Windows Installer or other driver package types (such as .exe files) are not supported.

Now here is the deal. While this tool lets you export all drivers, it doesn’t help you install those drivers back to Windows. The command has an option /add-driver, but it will work with Windows 10 ISO image. If you are creating an ISO and then planning to install it, you can use the following command.

Open Command Prompt with admin privileges.

Navigate to the Backup Driver folder.

Execute the following command-

dism /ISOIMAGENAME /Add-Driver /Driver:"Driver-Backups folder path" /Recurse

If you are used to PowerShell than the command prompt, you can use that too. It offers a command, Export-WindowsDriver -Online -Destination “Driver-Backup folder path”, which lets you take backup. Please read out the detailed post about exporting Device Drivers using PowerShell here.

Restore Device Drivers in Windows 11/10

It is best to install the driver manually if you are following this method. You will have to do it one by one, but in case something goes wrong, you will have a better understanding of what caused the problem. Make sure to keep the path of your Backup-Driver handy.

Open Device Manager using the Win+X Quick Link menu.

You will have two options, automatic, and manual. Select Browse my computer for drivers software.

In the next screen, you need to copy-paste the folder path, and also select the option to include subfolders.

The Device Manager will now search for the driver that is available for the hardware and install it. It is possible that Windows might have updated it with the new version, but if you want to rollback or keep an old one, you can do so.

Software to Backup & Restore Drivers

If you are looking for an easy way to backup drivers in Windows 10, then you may also use third-party driver backup software which can do that for you. This software can create a backup, and later restore them on demand.

Free Driver Backup is one such software that can do that for you. Apart from drivers, it can also backup cookies, registry, and other things as well. It also offers recommendations, or you can choose to backup all the drivers. Restoring is easy as well. Just point out to the backup folder, and it will pick up, and install it one by one.

Some others you may check out are Driver Sweeper, DriverBackUp, Free Driver Backup and Double Driver. If you are specifically looking to update AMD driver, check out  AMD Autodetect, and for Intel, check out Intel Driver Update Utility.

Let us know if we missed anything.

You're reading How To Backup And Restore Drivers In Windows 11/10

How To Restore Missing Or Deleted Services In Windows 11/10

Due to one reason or the other, you may notice one or more Services is deleted in the Services Manager on your Windows 11 or Windows 10 computer. In this post, we will present the various methods or suggestions you can try to successfully restore missing or deleted Services in Windows 11/10.

Restore missing or deleted Services in Windows 11/10

Windows Services are applications that typically start when the computer is booted and run quietly in the background until it is shut down. Essentially, a service is any Windows application that is implemented with the services API and handles low-level tasks that require little or no user interaction. Services provide core operating system features (such as printing, networking, remote access, File Explorer, Windows Search, updates, etc.) and apps to operate as intended.

PC users may need to restore a missing or deleted service or restore service configuration to default if changes to the Service General, Log On, Recovery, or Dependencies properties settings are causing an issue on your system.

You can restore missing or deleted Services in Windows 11/10 in either of the following ways:

Manually using Registry (.reg) files

Perform System Restore

Run SFC and DISM

Perform Reset This PC, Cloud Reset or In-place Upgrade Repair Windows 11/10

Clean Install Windows 11/10

Let’s take a look at the description of the process involved concerning each of the listed methods. But before you begin, please create a system restore point first so that you can revert if things go sideways.

1] Manually using Registry (.reg) files

To manually restore missing or deleted Services in Windows 11/10 using Registry (.reg) files, do the following:

Log into a working recently updated Windows PC.

Once logged in, press Windows key + R to invoke the Run dialog.

In the Run dialog box, type regedit and hit Enter to open Registry Editor.

Navigate or jump to the registry key path below:


At the location, on the left navigation pane, locate the Service folder for the Service missing/deleted for the other PC.

Export the registry key to an external USB drive.

Once done, unplug the USB drive.

Next, plug the USB drive to the PC that needs the Service.

You can now delete the .reg file if you like.

Repeat for any other missing or deleted Service you want to restore.

Restart PC when done.

2] Perform System Restore

System Restore is a native feature that ships with all versions of Windows OS that basically allows PC users to revert/restore their computer’s state (including system files, installed applications, Windows Registry, and system settings) to that of a previous point in time, which can be used to recover from system malfunctions or other problems.

3] Run SFC and DISM

Maybe some system files have got damaged. Run System File Checker in Safe Mode and see if that helps.

Additionally you may also run DISM Offline to repair a corrupted Windows image and see if that work for you.

4] Perform Reset This PC, Cloud Reset or In-place Upgrade Repair Windows

In severe cases of corrupt system files or missing, corrupted, damaged registry keys or even corrupt or damaged system image, you can try Reset This PC, or Cloud Reset to reset every Windows component. You may also try In-place Upgrade Repair which will certainly bring your system back to a pristine condition.

Related: How to repair Windows 11 without losing data or programs

5] Clean Install Windows 11/10

If your PC had any software (mostly when all other software troubleshooting you’ve tried has been unsuccessful) or hardware issues, performing a clean install will likely resolve any problems. Keep in mind that during a clean install of Windows 11/10, which is recommended as a last-ditch troubleshooting process—all the data on the computer’s hard drive will be erased — so be sure to take any necessary precautionary measures before you proceed with the procedure.

That’s it!

How to reset all Windows Services to default settings?

The best way to reset all Windows 11/10 Services to default settings is by running Reset This PC. The other way is to use the Repair this computer option in Windows Setup. There is also this script available on GitHub that claims to set Windows 10 Services back to default values based on Black Viper’s Service Configurations.

How do I restore Windows without a restore point?

To restore Windows 11/10 without a restore point, you can use System File Checker, Run the DISM scan, Use Reset This PC or Repair your computer using an installation media. This will get your Windows back in a healthy condition.

How To Restore The Classic Alt+Tab Dialog In Windows 11

In this tutorial, we will show you how to restore the Classic Alt+Tab dialog in Windows 11/10. You will be able to use the XP Style Alt+Tab Switcher that was introduced in Windows 95 and continued in Windows XP. This old Alt+Tab menu shows only app icons and has a compact size. While the modern Alt+Tab menu of Windows 11 looks pretty good and shows the thumbnail preview of opened apps, the classic Alt+Tab is extremely simple and less distractive, as you can see in the image below. So, if you want to use it, then you can check the options included in this post.

How to restore the Classic Alt+Tab Dialog in Windows 11/10

There are three different ways to restore the Classic Alt+Tab dialog in Windows 11/10. These are:

Using Windows Registry

Using Ultimate Windows Tweaker 5

Temporarily open the Classic Alt+Tab menu.

Let’s use these options one by one.

1] Using Windows Registry

If you want to permanently enable the classic Alt+Tab dialog in Windows 11, then you can use the Windows Registry trick. You can always get back to the modern Alt+Tab dialog anytime you want. Before this, take a Windows Registry backup in case you need it later. Now follow the steps covered below:

Open the Search box, type regedit, and hit the Enter key to open Windows Registry (or Registry Editor)

Jump to the Explorer key in the Registry Editor using the following path:


Create a new DWORD (32-bit) Value on the right section of the Explorer key

Rename the new value to AltTabSettings

Place 1 in the Value data

Press the OK button

Restart File Explorer.

To restore the modern Alt+Tab menu, use the above steps, and delete the AltTabSettings value that you created. Restart the File Explorer to add the change.

2] Using Ultimate Windows Tweaker 5

If you aren’t comfortable making changes to the Windows Registry manually, then you can also use our free Ultimate Windows Tweaker to restore the XP Style Alt+Tab Switcher in Windows 11. More than 200 tweaks are available to use and classic Alt+Tab is one such tweak. Here are the steps:

Download the ZIP file of Ultimate Windows Tweaker 5 and extract it into a folder

Execute the EXE file to open the tool interface

Select the Customization category from the left section

In Windows 11 tab on the right part, select Enable Classic Alt+Tab Menu option

Uncheck the other options in that tab otherwise, those tweaks will also be applied. You can use any tweak you like though

Press the Apply Tweaks button.

This will automatically restart the File Explorer and you can start using the old Alt+Tab menu.

To disable the classic Alt+Tab menu, you can use the above steps, uncheck the Enable Classic Alt+Tab Menu option, and hit the Apply Tweaks button.

Related: How to remove Alt+Tab Blur Background in Windows 11

3] Temporarily open the Classic Alt+Tab menu

This is an interesting trick that I like the most. If you don’t prefer tweaking Registry settings, then you can temporarily open the classic Alt+Tab menu with this option. Here are the steps:

Press and hold the left Alt key

Press the right Alt key and release it

Tap on the Tab key and you will see the classic Alt+Tab menu.

You can keep tapping the Tab key (while holding the left Alt key) to switch to the opened applications.

Release the Alt key and Tab key and the selected application will open. The classic Alt+Tab menu will also be gone as it is visible only once with this trick. You can follow the above steps as many times as you want to temporarily open the classic Alt+Tab menu.

That’s it.

How do I get my classic Alt-Tab back?

If you are on a Windows 11 computer and want to get back the old Alt+Tab menu (XP Style Alt+Tab Switcher), also known as the classic Alt+Tab dialog, then you can do it in three ways. These include a Registry Editor method, the Ultimate Windows Tweaker tool, and a trick that shows the old Alt+Tab dialog temporarily. All these options with a step-by-step guide are included in this post. Check them out.

How do I fix the Alt-Tab glitch?

Read next: Alt+Tab not working for Games and Apps.

System Restore Is Not Working In Windows 10: How To Fix It

System Restore is Not Working in Windows 10: How to Fix it Not able to get the System Restore Point to work? Check out these fixes




Sometimes, System restore is our only option when dealing with PC problems.

However, troubleshooting is needed when System Restore is not working in Windows 10.

This mostly happens when

the drive is not in the selected restore point, but there are other causes.

In this guide, we have listed some practical solutions that will help you resolve the problem.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

If you run into a significant problem on Windows 10, you should use System Restore to fix the problem by restoring your computer to a specific restore point.

This not only gets your system back to the point where everything was working perfectly fine, but it also saves you time performing a clean install, if you may.

System Restore is quite a helpful feature, but users complained that the restore point is not working on Windows 10, and today we’re going to fix that.

Why is the restore point not working?

While a system restore point helps you get back to the best version of your system, it often fails to perform its job.

Here are some common reasons why the restore point is not working for you.

There is possibly a corrupt system file that is causing the problem.

Because of a power failure, the restore point failed to get created.

Antivirus might be blocking the system restore.

A program or file might be conflicting with the System Restore Point.

The system restore points aren’t getting created.

What to do if System Restore fails while restoring the registry?

You might encounter this error if the System Restore isn’t working on your PC. This most likely occurs if the restore point is somehow damaged or corrupted.

If that’s the case, you might get System Restore did not complete successfully message. Also, in some rare cases, your antivirus may be blocking System Restore, so you might have to disable it.

These are just a couple of issues that can occur, but hopefully, this guide will be able to help you fix them.

Here are some more examples of this problem:

System restore did not complete successfully Windows 10

If you can’t complete the process of creating a restore point in Windows 10, try some of the solutions listed below.

Windows 10 System restore stuck

There’s also a chance for System Restore to get stuck, preventing you from creating a restore point.

System restore not working Windows 8

Even though we’re talking about Windows 10 here, you can easily perform most of these solutions in Windows 8, as well.

System restore failed Windows 7

The same thing applies to Windows 7.

The solutions below will help you if your system restore is not working in Windows 7 and 10 as well, even though they are primarily written for Windows 11.

How do I get to restore points in Windows 11? 1. Check if System Restore is enabled

Before we start, make sure that System Restore is enabled on your PC.

2. Try creating a restore point manually 3. Disable your antivirus software 4. Run System Restore from Safe Mode 5. Check your hard drive for errors

Sometimes restore point might not work due to corrupted files and folders on your drive, and to fix the corrupted files, you might need to check your hard drive. 

This process can take a while, so be patient. You might have to restart your computer to complete the disk-checking process.

6. Perform SFC scan

Expert tip:

7. Perform the SFC scan before Windows starts

The scanning process will now start. Wait while your system files are scanned. After the scan is completed, close Command Prompt and activate Windows 10 typically.

8. Make sure at least 300MB is used for System Restore by each partition

For System Restore to work correctly, each partition that has System Restore enabled requires at least 300MB to work. 

9. Check if services are running properly

System Restore relies on specific services, and if a particular restore point isn’t working, it might be because certain services aren’t running. 

10. Run DISM

Open the Start menu.

Type Command Prompt and run it as an administrator.

In the command line, copy-paste these lines one by one and press Enter after each: DISM /online /Cleanup-Image / ScanHealthDISM /Online /Cleanup-Image /RestoreHealth

Wait until the procedure ends (it might take up to 10 minutes).

Restart your PC.

11. Modify the registry 12. Use a dedicated tool

One downside to using Windows’ own Restore point is that while it creates an exact image of your PC’s files from any given moment, you may make a copy of data that may already be faulty or damaged.

Additionally, creating a restore point needs to be scheduled beforehand or done manually.

The last major downside of traditional restore points is that they are used for restoring registry hives instead of actual files. 

Given the downsides, using a reliable third-party tool suddenly becomes the better option, and few software tools are as good as Fortect.

First of all, it is fully automated, so no scheduling or manual input is required. You can check out our dedicated guide that gives you in-depth information about Fortect PC optimizer.

Also, it fixes registry keys and files using its own repositories before creating its restore points, so you always know that whatever restore point you choose during a rollback will always be fully functional.

⇒ Get Fortect

What do I do if Restore point is not working on Windows 11?

Here are a few additional tips apart from the ones mentioned above that will help you resolve if the restore point isn’t working on Windows 11.

Use the CHKDSK tool.

Enable Shadow Copy services.

Disable your antivirus or antimalware tool.

Reset your PC.

Perform a clean install.

Can Restore Point recover deleted files?

When you create a Restore Point on your PC, you take a snapshot of system files, system settings, installed programs, and Windows registry.

This does not include any of your files, such as documents, photos, videos, etc. So, the restore point only restores system-related changes and cannot be used to recover deleted files.

Still experiencing issues?

Was this page helpful?


Process Of Setting Up A Backup And Restore Jenkins

Introduction to Jenkins Backup

Jenkins backup is a solution for keeping the backup of critical configuration settings related to Jenkins. Jenkins has a backup plugin that can used to backup. Jenkins Backup and restore refers to services and practices for making periodic copies of data like configuration and access rights settings. All the backup data which includes setting related to IAM (Identity Access Management), plugin, artifacts archives and build logs saved inJENKINS_HOME directory. The easiest way to backup is just to set the new folder with new backup and just copy it back whenever it’s required the same.

Start Your Free Software Development Course

Web development, programming languages, Software testing & others

There are multiple methods to back up the Jenkins configurations such as:

1. using thin backup

2. using the git repo

Process of Setting up a Backup and Restore Jenkins

We will consider the process of setting up a backup and restore Jenkins to a new server step by step:

Login to Jenkins UI

We can see the plugin installed successfully after restarting Jenkins. We can found the newly installed plugin “Thin Backup plugin “under Manage Jenkins link.

Jenkins Thin Backup Setting

We can see backup configuration settings are available below. The user who is running the Jenkins services is responsible to define all the below configuration. The first configuration to define the directory where all the settings and configurations related to Jenkins are going to store. We can also schedule the backup for time to time update.

Performing Backup

Restoring Backup

The best way to check your backup data is, navigate to the specified back up directory. You could see the backup is created with the attached timestamp to the folder name. You can also find your old backup file which is available based on your retention policy settings.

Output directory where backup generated

Note: Perform sanity once Jenkins restore task has been successfully done.

Let’s take a scenario where I have deleted some files from Jenkins directory and recovered it from the backup.


rm: remove regular file ./lenkIns/hudson.plugins.git.GitTool.xml’? y

ls: cannot access chúng tôi No such file or directory

Post deletion of some files, we have restored the data from the backup.

For restoring

Step 2: Select the backup point from which you want to restore it back.

Now we have run the command to verify the file which was deleted is successfully restored or not.

Type the command “ls –l /apps/jenkins/hudson.plugins.git.GitTool.xml” verify the file.

rm /aaps/jenkins/hudson.plugins.git.GitTool.xml

rm: remove regular file ‘/apps/jenkins/hudson.plugins.git.GitTool.xml’? y

ls -l /apps/jenkins/hudson.plugins.git.GitTool.xml

ls: cannot access chúng tôi No such the or directory

-rw-r–r–. 1 Jenkins Jenkins 370 May 27 04:31 /apps/jenkins/hudson.plugins.git.GitTool.xml

Using the git repo

Let’s suppose in any organization, it has followed the devops practice and configured Jenkins as part of their build process. Basically DevOps team wants to configure a process and as part of process to set up a periodic backup for any disaster.

Pipeline Script to take backup

Step 1: Create a new Jenkins Job. You should choose Freestyle project

Step 2: Let’s add a job that will completely backup Jenkins including all jobs, playbooks, whatever else you have there. It will backup everything located at /var/lib/Jenkins. Select the “Build Periodically” build trigger and configure to run as frequently as you like.

Create a new file Backup_config and add the below script. Once the script added commit the file into source code repository.


pipeline { agentany stages { stage("BACKUP"){ steps{ sh """#!/bin/bash pushdbackup_config sudogitconfig --local "[email protected]" sudogitconfig --global chúng tôi "Smaheshwar85" popd cp -v var/lib/jenkins/*xml $WORKSPACE/backup_config pushdvar/lib/jenkins/ mkdir -p $WORKSPACE/backup_config/`dirname $i` cp $i $WORKSPACE/backup_config/`dirname $i` done popd cp -rfvvar/lib/jenkins/secret* $WORKSPACE/backup_config/ cp -rfvvar/lib/jenkins/user* $WORKSPACE/backup_config/ pushdbackup_config sudogit commit -a -m"Jenkins Backup Job" """ }} stage("PUSH"){ steps{ sshagent(["$GIT_CREDENTIAL_ID"]) { sh "cdbackup_config&&git push origin HEAD:$BACKUP_BRANCH" } }} }}


Once you have triggered the building backup is generated.

Recommended Articles

We hope that this EDUCBA information on “Jenkins Backup” was beneficial to you. You can view EDUCBA’s recommended articles for more information.

How To Download Windows Updates Manually In Windows 11/10

Most of us use Microsoft Update to keep our Windows 11/10/8/7 operating system and Microsoft software updated. But if you want to, for some, reason, download the updates manually and save it to your computer, this is how you can go about it:

How to download Windows Updates manually in Windows 11?

While creating Windows 11, the developers made sure to analyze the data for which settings are used more and which are used less. No doubt Windows Updates were prioritized and a separate menu was created for the same. The procedure to download Windows updates manually in Windows 11 is as follows:

Select Settings.

In the Settings menu, check the list on the left-hand side.

Windows Update would be the last option. Select it, please.

If any Update has failed to install, you will see it mentioned.

Note down the KB number of the Windows Update.

Once you have the number, you need to manually download the KB from the Microsoft website, the procedure of which is explained below.

Download Windows Updates manually in Windows 10

You can also Pause Windows Updates, change Active Hours or look at the Update History.

If any Update has failed to install, you will see it mentioned this.

Note down the KB number of the Windows Update.

Note down the KB number mentioned in the bracket.

Manually download the KB from the Microsoft website

This way, you will be able to install the update manually on any one or more of your computers, as long as it applies to the installed operating system or software.

Downloading, saving, and installing Windows Update manually may be done if you need to save the updates for some reason or if you find that you are unable to update your Windows using Windows Update.

Microsoft Update Catalog is a service from Microsoft that provides a listing of software updates that can be distributed over a corporate network. Using the Microsoft Update Catalog can prove to be a one-stop location for finding Microsoft software updates, drivers, and hotfixes.

WSUS Offline Update is a free tool using which, you can update Microsoft Windows or Microsoft Office easily without having an Internet connection.

Portable Update lets you update Windows 10 offline without an Internet connection.

Do we need to update Windows manually?

Ideally, Windows updates are performed by the system automatically. We don’t really need to hit the “Check for updates” button manually. But, if a third-party software stops the process, it needs to be restarted manually.

Furthermore, if you believe Windows hasn’t been updated for quite a while, performing a manual update could be very helpful. Personally, I check for a manual update occassionally just in case anything has been missed.

Why are Windows Updates so important?

One might argue that Windows Updates simply modify the features of the operating system or push fixes to existing problems, which many users might not require. So, why is it still important to make sure your system is up to date?

The reason is simple – security updates. Cybercriminals keep getting smarter and find ways to hack into the current system. To counter the same, Microsoft keeps launching security updates. These security updates are obviously important, else your system would be at risk.

Also see:

Update the detailed information about How To Backup And Restore Drivers In Windows 11/10 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!