Trending February 2024 # How To Fix “Host Process For Windows Services Stopped Working And Was Closed” # Suggested March 2024 # Top 3 Popular

You are reading the article How To Fix “Host Process For Windows Services Stopped Working And Was Closed” updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Fix “Host Process For Windows Services Stopped Working And Was Closed”

Don’t you just love cryptic Windows errors? In this post, I’ll be going through some steps you can take to fix the “Host process for windows services stopped working and was closed” error message in Windows.

I’ve already written about a few, such as the “there no active mixer devices available” error message and the “Internet Explorer has encountered a problem and needs to close” message.

Table of Contents

Sadly, most of these error messages give you no insight into what the problem actually is. When getting the Host process error, you might also notice that your Internet connection in Windows slows down considerably and you have to constantly restart the computer to fix it.

This error seems to occur due to an incompatibility between a program on your computer and the Windows OS. It could be a lot of different applications, so you first have to determine which program is actually causing the problem. You can do this by viewing the Event Logs on your Windows machine. Here’s how.

Fix Host Process Error in Windows

First go to Start and go to the Control Panel. In Windows 10, just type in control panel.

In Classic view, you will see an icon for Event Logs or Event Viewer and in normal view you will see a link at the very bottom called “View event logs“.

Now browse through the Windows Logs folder and view the Application and System logs.

Look for events with red X’s next to them and that have the word Error. Look for them around the same time or before you got the “Host process for Windows stopped working” error message.

Method 1

Some people have had this issue with ATI Catalyst Control Center and found numerous errors in their event log. You can then try to find an update for the program or uninstall it if it is not needed.

You might also have this problem with Windows Defender, so make sure to run Windows Update. Also, uninstall useless HP printer software, and check for other events from Nero, etc.

Another good troubleshooting technique is to perform a clean boot of your system, which will help you track down the exact third-party program or process that is causing problems.

Method 2

An incompatible driver installed on Windows could also cause the error. This could be for any piece of hardware on your system. You can figure out if it’s a hardware issue by booting up in Safe Mode and seeing if you get the error.

If it’s not there, then it’s definitely some driver that’s being loaded when Windows starts up. Open up Device Manager to see if there are any devices that have errors or warnings.

Method 3

If that didn’t do anything, you might be having an issue with the Background Intelligent Transfer Service (BITS) Windows service.

If you starting getting this message after you did a Windows update, then BITS could be the culprit. You’ll need to follow the instructions in this Microsoft KB article on how to repair the corrupt BITS files.

That article mostly refers to Vista, but if you are running any other version of Windows, check out this KB article instead.

Method 4

If you see an error in your Event logs that has EMDMgmt, then a thumb drive or some other external memory device, like a memory card reader, might be causing the issue. For some strange reason, you might have to connect the camera to your computer directly rather than using a card reader.

Method 5

A faulty RAM memory stick in your computer could also cause this error. You might want to run a full diagnostic on your computer to make sure your RAM does not have errors on it.

If you find a memory chip with errors, take it out and see if you get the error message. You can download a free app called Memtest86 to test the memory on your computer for errors.

You're reading How To Fix “Host Process For Windows Services Stopped Working And Was Closed”

How To Fix Onedrive’s Ssl_Error_No_Cypher_Overlap

How to fix OneDrive’s SSL_error_no_cypher_overlap






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

If you are using a third-party firewall on your computer, the firewall may block some connections.

Several users have reported the OneDrive SSL_error_no_cypher_overlap error while trying to access OneDrive from the browser.

As discussed above, this error occurs if a security program is blocking the connection for security reasons. If you are also troubled by this error, here are a couple of troubleshooting tips to help you resolve this error.

Steps to solve OneDrive’s SSL_error_no_cypher_overlap 1. Disable BT Web Protect

If you are using the BT broadband connection, do the following:

Launch the My BT app

Go to Inclusive Extras and select BT Web Protect.

Disable BT Web Protect if enabled.

Close My BT app

Try accessing the OneDrive account and check for any improvements.

BT Web Protect is a software feature offered by BT broadband with its My BT app. The app may block some websites if found to be suspicious. In this case, it is nothing but a false flag that is causing the issue.

Unable to download OneDrive files to your PC? Read how you can easily fix it in this awesome guide.

2. Disable Windows Firewall

Go to Updates and Security

Select Windows Security

Scroll down and toggle the switch to turn off Windows Firewall

Close and relaunch the web browser. Check for any improvements

2.1 Disable third-party antivirus

If you are using a third-party antivirus, check if it has a firewall option enabled

Disable any third-party software that can block the connection

If necessary, disable the antivirus temporarily

Do you want to check if your firewall is blocking some features? Follow the simple steps from this guide to find out.

3. Check for web browser issues

 Try to use a different browser to check if it is a browser-related issue.

If the issue is with a particular web browser then do the following.

3.1 For Google Chrome and Microsoft Edge 

Launch the Google Chrome

Select Help and feedback option

Select About Microsoft Edge / Chrome

The browser will check if any updates are pending

3.2 For Firefox

Launch the Firefox browser

You will see the Update button if any updates are available for installation.

Once the web browsers are updated, check if the OneDrive SSL_error_no_cypher_overlap error is resolved.

4. Reset TLS settings in Firefox

Launch Firefox

In the search box, type TLS

Now check if any of the value is in bold. If so, that value is modified recently.

This will restore the value to its earlier settings.

Next, repeat the search again with SSL3.Check for any value that appears in bold.



The OneDrive SSL_error_no_cypher_overlap is caused by third-party security programs or apps from your ISP. By following these steps you can fix the problem and access OneDrive online without any issues.


Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

How To Fix Final Fantasy Xiii

If you are trying to install or update Final Fantasy XIII-2 on Game Pass PC or have already finished playing it and would like to uninstall FF13-2. This article will show you how to troubleshoot update, installation and uninstallation problems that are known issues with Final Fantasy XIII-2 on Game Pass.

Related: How to fix the Google Play store stuck in an opening loop on Android.

Game Pass PC is my favourite gaming service at the moment which is surprising because I’ve always been a huge fan of Steam. However, you can’t deny the fact that Game Pass is super good value, has a ton of different games on offer, with a list that seems to grow faster than you can finish games. With over 100 games to choose from, Game Pass is a no-brainer. A one-month subscription is cheaper than buying any single game outright.

As most people who use Game Pass on PC already know, the Xbox app and the Microsoft Store app on both Windows 10 and 11 are useless. We’ve all had more problems with Game Pass than decades of Steam use. The worst part is that all these issues are universal and affect every Game on Game Pass, including Final Fantasy XIII-2.

So how exactly do you Update Final Fantasy XIII-2 on Game Pass? Final Fantasy XIII-2 won’t update on Game pass.

For whatever reason, some Game Pass games won’t update automatically in the Xbox App. Final Fantasy XIII-2 is one of them. So you’ll need to do the following to manually force an update.

Next, change to the Games tab and you will see all the Games installed on your computer from the Microsoft Store and Xbox app.

How do you uninstall Final Fantasy XIII-2 from Game Pass? Final Fantasy XIII-2 won’t remove from a drive properly.

If you can’t seem to uninstall Final Fantasy XIII-2 from Game Pass, there are several different things you can try. You may have to try all of these until you find the one that works. Yes! Game Pass really is that annoying. We’ve listed the options in order of ease so work your way down the list. Be aware that games sometimes remove from the catalogue but the space on your drive stays used.

Try using the Microsoft Store to Install or Uninstall Final Fantasy XIII-2.

If you have installed Final Fantasy XIII-2 on a secondary drive. Try unplugging it then plugging it in again.

The third option is to physically unplug the drive where the games are installed on your computer. If you have the option that is. Disconnect the SATA and power cables. Wait about a minute then reconnect the drive to your computer. Once the drive reappears you should be able to manually delete the files from the installation location using File Explorer. Just be aware that this method does come with the potential to corrupt or damage other data on the drive, however, I’ve used it quite a few times and never had an issue. But it’s still important to mention it.

Format your drive to uninstall Final Fantasy XIII-2 from Game Pass.

This will wipe the drive clean and remove everything on it. If you have a secondary hard drive I would suggest setting this as your Game Pass games drive so that you can format it quickly and easily in the future Game Pass is notorious for storage issues.

How To Fix 0% Gpu Usage

Many applications, such as video games and simulations, use GPU for their operation. Your GPU takes care of resource-intensive display processes and eases the CPU load.

However, if your total GPU usage or usage for certain games shows 0%, the processes are likely to use your CPU instead. You can easily fix it by changing the graphics settings.

So, let’s move on to your problem’s potential reasons and solutions.

Here are some possible reasons for 0% GPU usage:

System using CPU integrated GPU rather than the dedicated GPU.

Task Manager displaying incorrect data.

GPU driver issues.

First, make sure to connect your display cable to the GPU ports, not your motherboard. If the GPU usage stays at 0%, apply the possible solutions below to fix the issue:

Most users use the Task Manager to check the utilization of your system resources. However, sometimes, it does not show accurate data, especially concerning GPU. If you are running GPU-intensive applications, such as video games, chances are the usage you can see on the Task Manager is false.

We recommend using GPU overlays or GPU monitoring applications to get the correct GPU usage.

If you are using any applications that render images or videos, they should use your GPU. By default, your system decides whether the CPU integrated or the dedicated GPU handles the application.

Sometimes, when the app uses the CPU integrated graphics processor, the Task Manager shows activity at the CPU. So, you need to force such apps to use your dedicated GPU before running it. To do so,

Low GPU usage is normal if you are not using any process requiring a dedicated GPU. That said, if your total GPU usage is 0%, it might be because your display is running on the CPU.

We recommend enabling Hardware-accelerated GPU Scheduling to fix this issue. It allocates some high-priority tasks to the GPU to reduce CPU load. Your graphics card and driver must support this process. Moreover, you need to have the Windows 10 May 2023 update as well.

Here are the necessary steps for this method:

NVIDIA GPUs have the PhysX hardware accelerator engine for better graphics performance. If your current PhysX processor is the CPU instead of your GPU, your system transfers all heavy load to the CPU. Here’s how you can change this setting:

As we mentioned earlier, your system can also allocate the graphics-related tasks to the CPU’s integrated GPU instead of the dedicated one. You can also force the system to use GPU by changing a BIOS setting. Here’s how you can do so:

Visit the official website of the motherboard to find out the option.

Outdated graphics drivers may also be responsible for your system using the CPU instead of the GPU. This happens as the OS erroneously determines the GPU to be defective. You should always have your drivers fully updated to prevent such issues.

It’s better to install the latest drivers from the official website. But you can also update the drivers from the Device Manager using the steps below:

If you already have the latest drivers, uninstall and then reinstall them. For NVIDIA GPU, we recommend using the Display Driver Uninstaller (DDU) to uninstall the software.

You can usually check the GPU usage using the Task Manager. But as we mentioned earlier, it doesn’t always give accurate information. We have a dedicated article on How to Check GPU Usage. You can visit to find additional methods to check GPU usage.

If you have more than one GPU on your system they will show up as GPU 0,1, and so on on the Task Manager. You can find which GPUs they represent from the Performance tab.

How To Fix Premiere Pro Unable To Render. (Accelerated Renderer Error Fix)

If you are trying to encode/render a project in Adobe Premiere Pro but keep getting Unable to Render – Accelerated Renderer Error. This article will show you a couple of different troubleshooting steps you can try that will fix the problem and allow you to render projects in Adobe Premiere without Unable to render error.

Related: How to fix the text tool not working in Photoshop.

Adobe Premiere Pro can be quite a mind-blogging program to get your head around if you are just starting out with video editing. It’s also a very resource-intensive program to use on laptops and older machines as it uses a lot of CPU and GPU power to process video footage and the assets and graphics you add to projects. That said, there aren’t many other programs out there that offer the features that Premiere Pro does.

I’ve recently been using Premiere Pro to edit and create content from 360 camera footage and noticed that it continually gets Unable to Render – Accelerated Renderer Errors shortly after starting the encoding/rendering phase of an export. Thankfully, there is a really easy way to fix Unable to Render – Accelerated Renderer Error in Adobe Premiere Pro and a few of the other similar errors that occur during export. But before we start, it’s important to understand what is causing this error.

Ninety-nine times out of one hundred Unable to Render – Accelerated Renderer Error in Adobe Premiere Pro is caused by a graphics card overload, though some errors can also be linked to CPU usage. As a result, Premiere Pro will cancel the process and drop an error message. The good news is that this can easily be fixed by switching from hardware encoding/rendering to software encoding/rendering.

There is one major downside to this though…. Speed! Software rendering takes a hell of a lot longer to do, for example, I recently exported a video for YouTube (check it out here) that was 2 minutes and 22 seconds long. Normally it would take about 3 minutes to render in Premiere Pro using hardware rendering, however, I had to switch to software rendering because of the animations I used. This brought my rendering time up to 33 minutes. So if you are working with 4k footage or something with a lot of graphical content and assets you’re going to be waiting for a long time.

How do you fix Unable to Render – Accelerated Renderer Error in Premiere Pro?

The second fix is to switch from hardware rendering to software rendering. As Premiere Pro defaults to hardware rendering you’ll need to do the following to switch it. First, open a project in Premiere Pro, then do the following.

Alternatively, you could go to the time marker in the error message and replace the graphics or asset with something less graphically intense. This has saved me a few times but it is disappointing to change part of your project that you worked so hard to get perfect.

How To Reset Chrome Sync To Fix Problems

Google Chrome is excellent at syncing browser data between desktop and mobile devices. The integrated Chrome sync functionality, which helps make that happen, works efficiently behind the scenesn.

Over time, though, you may run into issues where Chrome fails to make your browsing data available across devices. In such instances, resetting Chrome sync is a fix that can help.

Table of Contents

What Happens When You Reset Chrome Sync

Chrome uses the Google servers to upload and sync changes to browsing data among devices. A Chrome sync reset allows you to start again from scratch.

The reset starts by deleting the browser data stored within Google’s servers. It then logs you out of Chrome on all your devices. This disables Chrome sync everywhere.

Chrome assumes the data present on the first device that you sign in with as the most recent. While you can use any of your devices to reset Chrome sync, you must enable it again on a device that contains a complete version of browsing data. If not, you may end up syncing obsolete data among devices.

Why You Must Reset Chrome Sync

Below, you can find several scenarios that can call for a Chrome sync reset.

You Can’t Sync Your Data Between Devices

If you are sure that you’ve set up Chrome sync correctly, you can try resetting it to set things straight. After deleting the data online, sign back in with the device that has your most recent browsing data.

You Keep Running Into Performance Issues

Do you keep running into performance issues in Chrome? If you’ve already gone through the recommended troubleshooting fixes for Chrome crashes and freezes, you can wrap that up by performing a Chrome sync reset.

You Forgot Your Sync Passphrase

A sync passphrase allows you to encrypt the data on the Google servers. That prevents anyone from reading your browsing data if you end up compromising your Google Account credentials. 

If you forget your sync passphrase, however, you can’t sync your browsing data to newer devices. In that case, a Chrome sync reset can help you get rid of it. You must also do that if you want to change your sync passphrase.

You Deleted Passwords or Bookmarks Accidentally You Have Privacy Concerns

Do you feel uncomfortable having your browsing data stored on Google’s servers? If you want to stop using Chrome sync altogether, resetting it can help you get rid of the online data. Aside from that, you may also want to look into deleting your Chrome web activity.

How to Reset Chrome Sync

Resetting Chrome sync is a straightforward affair. You can perform it on any device (desktop or mobile) that you’ve signed into with your Google Account. You do not have to repeat it on other devices.

Desktop (Windows/macOS)

1. Open the Chrome menu and select Settings.

2. Select Sync and Google services.

3. Select Review your synced data.

4. Scroll down the Data from Chrome sync page and select Reset Sync.

5. Select OK.

Mobile (Android/iOS)

1. Open the Chrome menu and tap Settings.

2. Tap Sync and Google services.

3. Tap Manage Sync.

4. Tap Manage synced data (Android) or Data from Chrome sync (iOS).

5. Scroll down the Data from Chrome sync page, and tap Reset Sync.

6. Tap OK.

How to Enable Chrome Sync

After you’ve reset Chrome sync, you can sign back in and reactivate it on your devices. Since you’ve already signed into the browser previously, you do not have to re-enter your Google Account credentials again.

Desktop (Windows/macOS)

1. Select your profile icon to the right side of the Chrome address bar.

2. Select Turn on sync.

3. Select Yes, I’m in.

Mobile (Android/iOS)

1. Open a new tab and tap the profile icon to the top-right of the screen.

2. Tap Sign in to Chrome.

3. Tap Yes, I’m in.

Fix Issues With a Chrome Sync

How To Fix ‘Message Blocking Is Active’

Last Updated on May 15, 2023

Sometimes, errors can come at the worst of times. It’s not uncommon to try and send a text only to receive the message back that your message was unable to send – but most of the time, these issues are related to a lack of service. However, if you have received an error message saying that your message blocking is active when you have not activated such a feature, then trying to find the best way around it can be tricky.

What Causes The Message Blocking Error?

If you have experienced this error, then you are not alone. Many customers of T-Mobile have also reported similar experiences, but what has caused the error?

One such cause is a service outage. These aren’t uncommon for any kind of mobile service provider and it could just be that when you tried to send your text, your service provider was experiencing a service outage. This break is only temporary, so the service should be up and running again very soon.

Another reason could be that you are trying to send someone a text who you have blocked, or the receiver has blocked you. For the text to go through, both individuals must not have the other on their block list so they can communicate easily.

In a similar vein, it could be that the receiver of the text has blocked any premium SMS messages from reaching their phone. Again, this needs to be deactivated for your text to go through.

And finally, the reason behind this message blocking error could be a short code issue. This issue is a very serious technical issue that has caused your short codes to set themselves to blow.

This can only be fixed by T-Mobile technicians and is not something you can do yourself, but it’s also comforting to note that this issue is also very rare.

How To Fix Message Blocking Error

So, now we know the causes behind this message error, let’s look at how you can fix it!



Check The Service Status

The first thing you should do if you ever find yourself unable to send your texts is to check online to see if anyone else is experiencing a similar issue.

A quick internet search will let you know if your mobile service provider is experiencing issues – there are live websites that track outages, plus the provider themselves may make a statement on their social media to address the issue.

Check to see if the issue is widespread before trying to fix anything on your phone.



Check Your Block List

If the other person you are texting has blocked you, then there is nothing you can do until you meet face to face. Let them be aware of the issue and hopefully they can fix that on their end.

However, you might as well check your own block list to make sure you have not blocked them accidentally. Go to the contact’s information page and see if the option is there to unblock. If so, press it and try again.



Allow Premium SMS Access

Head into their settings and scroll down to the Application option.

Press Special Access and then Premium SMS Access.

If your texts still don’t send, then try this process again but select Always Allow instead of Ask.



Head To T-Mobile Support

If you still cannot send texts even after all this, then it’s time to contact the T-Mobile Support Team. They will be able to get into the nitty-gritty technical bits of your phone and solve the issue from there. 

It is worth popping them an issue online first to see their response but you can always take your mobile into your nearest T-Mobile store and speak to someone face to face. 

From there, they can take over and sort out the issue.


And there you have it. All the possible solutions to solving the Message Blocking Is Active error from T-Mobile. We hope this has helped!

Update the detailed information about How To Fix “Host Process For Windows Services Stopped Working And Was Closed” on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!