Trending February 2024 # How To Locate The System Image Tool In Windows 8.1 # Suggested March 2024 # Top 7 Popular

You are reading the article How To Locate The System Image Tool In Windows 8.1 updated in February 2024 on the website Kientrucdochoi.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Locate The System Image Tool In Windows 8.1

We previously went over how to create a system image in Windows. However, if you upgraded to Windows 8.1, you may have found out the toll isn’t where it used to be. If you want to use the System image tool in Windows 8.1, here’s where to find it:

2. Select “System Image Backup” from the lower left-hand corner of the window.

3. Create a system image backup.

You can also use a Windows USB flash recovery drive, if you’re unable to boot into Windows.

Shujaa Imran

Shujaa Imran is MakeTechEasier’s resident Mac tutorial writer. He’s currently training to follow his other passion become a commercial pilot. You can check his content out on Youtube

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

You're reading How To Locate The System Image Tool In Windows 8.1

How To Forget / Delete A Wifi Network In Windows 8.1

Updates to operating systems are usually a good thing, as they bring feature enhancements, improvements etc. that are not only useful but also quite essential. Windows 8.1 is a really good example of such a scenario. The update, which was released a few months back, attended to all the holes left gaping in its predecessor, Windows 8. In all honesty, it actually made the Windows 8 experience actually usable as well as worth enjoying. However, with the release of Windows 8.1, there were still some nuisances that were still left and slipped through the crack. One of these, which we here at MTE would classify as plain stupid, was the inability to forget a Wi-Fi network if you were connected one.

Yes, that’s correct. Windows 8.1 does indeed have an “inability” which doesn’t easily let it forget a WiFi network if you’ve ever established a connection. What this actually means is if you’ve ever connected your PC to a WiFi network in your school or office, you can’t really forget it as you’d do in Window 8, which allowed you to achieve the same feature through the context menu. Fortunately, if you’re really desperate and need your PC to forget the WiFi network for particular reasons, there are two different ways – different approaches through which you can achieve just that, and in this post we’ll be showing you how.

1. Command Prompt Method

A list will pop up showing all the known profiles. Simply identify the name of the one that you want to remove, and enter the following command:

netsh wlan delete profile

name

=

"profile_name"

where “profile_name” will be replaced with the actual name of the profile that you want to remove. For example, in the screenshot below, the profile “PTCLNitroCloud-AC4” is to be removed/forgotten:

And that’s just about it. The profile is removed and the network will show as a new, unidentified network the next time it’s in range.

2. The Visual Method

Another easier method is already present in Windows 8.1, just a little confusing. You see, if the OS fails to connect to a known/remembered network, it will automatically give you the option to forget that connection. However, you cannot really force a non-connection to a known network by default, so the easiest way to achieve this would be to change the security key of the Wi-Fi network you would like to forget to an incorrect one, and then using this “Forget this Network” option. The downside to this approach is that is will only work on connections which are secured.

Shujaa Imran

Shujaa Imran is MakeTechEasier’s resident Mac tutorial writer. He’s currently training to follow his other passion become a commercial pilot. You can check his content out on Youtube

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Set The Print Screen Button To Open The Snipping Tool In Windows

Keyboard shortcuts can streamline all sorts of actions in Windows. Depending on your keyboard, these can be as simple as a single press. But what if you’re not satisfied with what a shortcut can do? Take the Print Screen button, which allows you to capture a screenshot and paste it into an image editor or word document. If you think it would be much more helpful to press the button and open the built-in Snipping Tool in Windows 10 and 11, follow this guide to learn how to set up this configuration.

Good to know: Snipping Tool not working in Windows? We offer a few solutions that are proven to work.

How to Make the Print Screen Key Open the Snipping Tool

Back when Microsoft’s MS-DOS was the primary system in use, hitting the Print Screen key sent whatever was on the screen to the computer’s memory to be printed.

The Print Screen button’s current function is a relic of a bygone era, and even Microsoft plans to change its modus operandi. Actually, evidence has surfaced (via Windows 11 Beta preview builds) that the tech giant plans to remap the key to open the Snipping Tool in Windows by default.

1. Enable Accessibility Setting

To be clear, you can currently remap the key manually, but an upcoming Windows update may turn it on by default. After the update, if you wish, you can turn it off so that it doesn’t open the app.

Scroll down and select “Keyboard” under the “Interaction” section.

Toggle on the switch for “Use the Print screen button to open screen snipping.”

Other than that specific remapping setting, there is no way for you to remap your other regular keys in Windows – unless you have a gaming keyboard with built-in remapping and macro support. That’s where Microsoft PowerToys come in.

It’s a free download, and the utility is meant for power users to tweak how Windows works – this includes remapping the keyboard or mouse buttons. If you plan on remapping other keys apart from Print Screen, this option is for you.

2. Using Microsoft PowerToys

The first step is to download and install PowerToys from Microsoft, either through the Microsoft Store, an executable on GitHub, or Windows Package Manager. Based on your computer’s architecture, you must download the x64 or the Arm64 version.

Note: if you want to install Git and Git Bash on Windows, you can learn how to do it.

Once installed, PowerToys should open to the welcome splash screen or sit in your taskbar’s tray icons.

Ensure that the “Enable Keyboard Manager” switch is toggled to green.

This opens another window with a short explanation. There are two columns: “Physical Key” and “Mapped To.” Essentially, it will list the keys that will be mapped and their new actions.

Tip: in the market for a new keyboard? Check out these wireless mechanical keyboards that are super convenient.

Once set up, you can use your newly-created shortcut to automatically open the Snipping Tool when you press the Print Screen key.

Tip: has your laptop keyboard stopped working? Learn what you can do to handle any issues.

Frequently Asked Questions Can you remap the buttons on your mouse with PowerToys?

While there are plenty of customizable options for your mouse and pointer, you can’t change what the buttons do. However, PowerToys provides accessibility features, such as pointer location, screen jumping, and cursor highlighting.

Can you use the remapped shortcuts when PowerToys isn’t running?

No. For your shortcuts and modifications to work, you must have PowerToys installed and running in the background. By default, PowerToys is added to your system’s startup applications and automatically runs when you log in to your computer. You can find the toggle for this option in the “General” tab under the “Appearance and Behavior” heading.

Can I use PowerToys to remap any keyboard shortcuts?

While PowerToys is incredibly useful, it has limitations. For example, the Windows + L and Control + Alt + Del keys can’t be remapped, as they are reserved for the Windows operating system. In most cases, the Fn key (Function) can’t be remapped either, but the F1 to F12 keys can.

If you are a gamer, you also can’t remap the Windows + G combination. In theory, it’s possible, but you’ll find that it will always open the Windows Game Bar even when reassigned. However, you can disable the Game Bar in Windows Settings, which makes it a bit easier.

Image credit: Unsplash. All screenshots by Charlie Fripp.

Charlie Fripp

Charlie Fripp is a technology writer with a strong focus on consumer gadgets, video games, and cyber security. He holds an undergraduate degree in professional journalism and has worked as a journalist for over 15 years. In his spare time, he enjoys playing various musical instruments and gardening.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Fix System Service Exception Stop Code In Windows 10

While uncommon, Blue Screen of Death (BSOD) errors do still occur in Windows 10. Unlike the wall of blue text that older Windows versions displayed when a system crashed, newer Windows BSODs are simpler and easier to troubleshoot. One common BSOD error that still occurs is a System Service Exception in Windows 10.

For most users that statement means nothing. Understanding what a BSOD System Service Exception error is should help you to troubleshoot and fix the problem. If you’re facing this kind of BSOD error on your Windows PC, here are some steps to help you understand, troubleshoot, and resolve the issue.

Table of Contents

What Is A System Service Exception Error In Windows 10?

In Windows 10, a BSOD caused by a System Service Exception error (usually shown as SYSTEM_SERVICE_EXCEPTION) is unusually tricky to resolve. Unlike a Windows Stop Code Memory Management BSOD, this error has any number of potential causes.

Don’t be too surprised if this BSOD sounds familiar—this BSOD has existed in Windows for decades. While it sounds generic, the Microsoft technical explanation states that this BSOD is usually caused when a running process on your PC attempts to move from “non-privileged to privileged code.” 

Windows, like all operating systems, has security levels in place for different system processes to ensure only the right code can run at the right times and by the right processes. When that fails for any reason, errors like this occur to stop the process from causing harm to your system. Unfortunately, there could be any number of causes behind this.

Update Windows 10 and Installed System Drivers

The best fixes are sometimes the simplest, and for many users, a quick trip to the Windows Settings menu to update your PC could be all you need to fix the System Service Exception Error.

Microsoft regularly issues important fixes and improvements for Windows, especially for new hardware. This includes new driver updates for your different system components.

You may need to search online for additional driver updates, however. Graphics card manufacturers like NVIDIA, for instance, often have newer drivers available on their website than those offered through Windows Update.

Run the Windows Driver Verifier Tool

Protected system code can usually only be accessed by certain system processes or devices, which is why hardware drivers usually cause System Service Exception errors in Windows 10, as they’re among the pools of third-party apps that can do this.

Even new device drivers can cause this BSOD error, especially if you’ve installed brand new hardware. If you’re unsure whether your drivers are causing this BSOD to occur, you can run the Windows Driver Verifier tool to check.

This is a troubleshooting tool that is designed to stress test your system drivers. However, be warned—this is designed to find and recreate the very bugs that cause a Stop Code System Service Exception error in the first place, so don’t run this tool while you’re using your PC for anything critical.

It is essential that you backup your PC before you do this by first creating a new system restore point. The Driver Verifier is a development tool and is designed to cause BSODs when a driver can’t be verified or if a driver is corrupted.  This could mean your PC becomes stuck in a BSOD loop caused by Driver Verifier itself.

This is an entirely normal and expected result when Driver Verifier detects an issue with your drivers. You’ll need to analyze your BSOD dump files next to identify the drivers causing your BSOD issues and replace them, then disable Driver Verifier in Safe Mode (or use your System Restore point) to fix the BSOD loop it causes.

To test all the drivers on your PC, select the Automatically select all drivers installed on this computer option and then press Finish. If you want to test a specific driver, choose Select driver names from a list instead, then press Next.

If you chose the Select driver names from a list option, select the driver (or drivers) you wish to test at the next stage, then press Finish.

To stop Driver Verifier from running its driver stress test, type verifier /reset at the PowerShell window and hit enter, then restart your PC.

Resolving a Driver Verifier BSOD Loop

As we’ve mentioned, the Driver Verifier may cause additional BSOD errors when it detects an issue, forcing you into a BSOD loop. This is to be expected, and you’ll need to check your BSOD dump logs for more information. In most cases, however, upgrading or replacing your drivers will resolve the problem.

However, you’ll need to boot into Safe Mode first, then switch Driver Verifier off and delete its settings to stop this BSOD loop occurring. 

After your PC restarts, select 4 or F4 to boot into Safe Mode, or 5 or F5 to boot into Safe Mode with networking features enabled.

In the new PowerShell window, type verifier to open the Driver Verifier tool.

Select Delete existing settings in the Driver Verifier Manager window, then select Finish. If your PC doesn’t automatically restart, restart it yourself at this point.

This should resolve any additional BSOD loops caused by the Driver Verifier. However, don’t forget that if Driver Verifier does cause a BSOD loop, it’s working as intended. 

You’ll need to investigate your BSOD dump files for further information to identify the problematic driver (or drivers) causing your BSOD errors and update or remove them.

Restoring Your PC using System Restore

If disabling Driver Verifier in Safe Mode doesn’t resolve your BSOD loop, use the System Restore point you created before you started this process to reset your PC back to an earlier point. Otherwise, you’ll need to consider resetting Windows to factory settings as a last resort.

Select an Administrator account on your PC from the list provided and sign in accordingly. Once you’ve done this, select Next to begin the System Restore process.

Select the system restore point you created before you ran the Driver Verifier tool from the list provided, then select Next to continue.

Once you’re ready to restore your PC using this System Restore point, select Finish.

If the BSOD Verifier causes further BSODs, then you can assume that it has identified a driver that isn’t fit for purpose that could cause both BSODs. Check your BSOD dump logs for further information—once you’ve identified the rogue drivers, you’ll need to uninstall them or replace them with newer (or older) drivers.

This should help you to troubleshoot the cause of your driver BSOD issues, especially if you see a System Service Exception BSOD appear on your PC.

Run CHKDSK and SFC Tools

A problem with your drive or system files could cause a System Service Exception in Windows 10. You can run the chkdsk and sfc commands from an elevated command line or Windows PowerShell window to double-check if this is the case.

To check the integrity of your Windows files, type sfc /scannow from the PowerShell window. As with the chkdsk tool, this tool will automatically detect any missing system files and correct them, where possible.

Reset or Reinstall Windows 10

When all else fails, and if you’ve ruled out a problem with your hardware itself, then resetting Windows 10 to its default state (or wiping and reinstalling it entirely) may remove any conflicts causing this BSOD error.

Note: Once this process begins, there’s no turning back, so make sure you’ve backed up your PC first.

Keep Windows 10 Updated to Prevent BSOD Errors

The steps we’ve listed above should help you troubleshoot the problem when a Stop Code System Service Exception BSOD appears on your PC. In many cases, keeping your system updated should stop BSODs from appearing, unless there’s a more serious hardware issue at fault.

How To Find The Best Pdf Manager Tool For Windows Pc

How to Find The Best PDF Manager Tool For Windows PC

Developed in the early 1990s, the Portable Document Format became popular for personal and business needs. PDFs are popular for capturing high-quality design, print pages, viewing documents in sync irrespective of platform, etc. Due to this, most people think PDFs can’t be edited, but this isn’t true; they aren’t carved in stone. The best PDF managers allow opening up almost any Portable Document File so that you can move pages, rearrange PDFs, add passwords, duplicate pages, merge PDFs, split pages, add blank pages, remove passwords, etc.

What is a PDF Manager?

With that being said, let’s know about the best PDF Manager that allows you to perform all these tasks.

What is the Best PDF Manager?

The Advanced PDF Manager lets you add a blank PDF, merge PDF, Split PDF, and combine PDF files. If you want to try it for free, you can use the trial version of Advanced PDF Manager. The free version allows using all features. After that, you have to purchase the tool.

Whether you just want to combine multiple documents, split PDFs, add a password, or duplicate PDFs, you don’t need separate tools. Advanced PDF Manager for Windows will help do all that. Also, using the different viewing modes allows previewing the output before saving the PDF.

What Advanced PDF Manager offers?

SPECIFICATIONS

Cost: $39.95/yearly

Developer: Tweaking Technologies

Compatibility: Windows

Category: PDF editor

REASONS TO BUY

Intuitive interface.

Multiple functionalities.

Combine, split, duplicate PDFs

Add password to PDFs

Remove password from PDF files

Multiple PDF viewing modes.

REASONS TO AVOID

-Only compatible with Windows OS.

How to Use Advanced PDF Manager?

To use Advanced PDF Manager and edit PDF, follow these steps:

Note: You cannot split PDF in collapse view. Also, if you haven’t purchased the key, you can use the fully functional trial version available for 14 days.

1. Download and install Advanced PDF Manager.

2. Launch the PDF Manager for Windows to edit the added PDF files.

4. Change the view from collapse to small Multiview, medium, and so on, as shown in the screenshot below:

That’s it; this is how you split PDF using Advanced PDF Manager.

Note: You can split bulk documents using Advanced PDF Manager.

Wrap Up – The Best PDF Manager for Windows

Keep the following features when looking for the best PDF Manager for Windows. It will help you get the all-in-one tool and will save you from the trouble of installing different software. Also, Advanced PDF Manager assists with the most crucial job of password protecting and removing passwords simultaneously. You can use the fully functional trial version for 14 days and see how the tool works. Once you know, it is what you need, pay up for the tool and enjoy managing PDF. Advanced PDF Manager also helps rearrange PDFs, move PDFs, rotate PDFs, print PDFs, and do more.

Quick Reaction:

About the author

Preeti Seth

System Restore Is Not Working In Windows 10: How To Fix It

System Restore is Not Working in Windows 10: How to Fix it Not able to get the System Restore Point to work? Check out these fixes

4

Share

X

Sometimes, System restore is our only option when dealing with PC problems.

However, troubleshooting is needed when System Restore is not working in Windows 10.

This mostly happens when

the drive is not in the selected restore point, but there are other causes.

In this guide, we have listed some practical solutions that will help you resolve the problem.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

If you run into a significant problem on Windows 10, you should use System Restore to fix the problem by restoring your computer to a specific restore point.

This not only gets your system back to the point where everything was working perfectly fine, but it also saves you time performing a clean install, if you may.

System Restore is quite a helpful feature, but users complained that the restore point is not working on Windows 10, and today we’re going to fix that.

Why is the restore point not working?

While a system restore point helps you get back to the best version of your system, it often fails to perform its job.

Here are some common reasons why the restore point is not working for you.

There is possibly a corrupt system file that is causing the problem.

Because of a power failure, the restore point failed to get created.

Antivirus might be blocking the system restore.

A program or file might be conflicting with the System Restore Point.

The system restore points aren’t getting created.

What to do if System Restore fails while restoring the registry?

You might encounter this error if the System Restore isn’t working on your PC. This most likely occurs if the restore point is somehow damaged or corrupted.

If that’s the case, you might get System Restore did not complete successfully message. Also, in some rare cases, your antivirus may be blocking System Restore, so you might have to disable it.

These are just a couple of issues that can occur, but hopefully, this guide will be able to help you fix them.

Here are some more examples of this problem:

System restore did not complete successfully Windows 10

If you can’t complete the process of creating a restore point in Windows 10, try some of the solutions listed below.

Windows 10 System restore stuck

There’s also a chance for System Restore to get stuck, preventing you from creating a restore point.

System restore not working Windows 8

Even though we’re talking about Windows 10 here, you can easily perform most of these solutions in Windows 8, as well.

System restore failed Windows 7

The same thing applies to Windows 7.

The solutions below will help you if your system restore is not working in Windows 7 and 10 as well, even though they are primarily written for Windows 11.

How do I get to restore points in Windows 11? 1. Check if System Restore is enabled

Before we start, make sure that System Restore is enabled on your PC.

2. Try creating a restore point manually 3. Disable your antivirus software 4. Run System Restore from Safe Mode 5. Check your hard drive for errors

Sometimes restore point might not work due to corrupted files and folders on your drive, and to fix the corrupted files, you might need to check your hard drive. 

This process can take a while, so be patient. You might have to restart your computer to complete the disk-checking process.

6. Perform SFC scan

Expert tip:

7. Perform the SFC scan before Windows starts

The scanning process will now start. Wait while your system files are scanned. After the scan is completed, close Command Prompt and activate Windows 10 typically.

8. Make sure at least 300MB is used for System Restore by each partition

For System Restore to work correctly, each partition that has System Restore enabled requires at least 300MB to work. 

9. Check if services are running properly

System Restore relies on specific services, and if a particular restore point isn’t working, it might be because certain services aren’t running. 

10. Run DISM

Open the Start menu.

Type Command Prompt and run it as an administrator.

In the command line, copy-paste these lines one by one and press Enter after each: DISM /online /Cleanup-Image / ScanHealthDISM /Online /Cleanup-Image /RestoreHealth

Wait until the procedure ends (it might take up to 10 minutes).

Restart your PC.

11. Modify the registry 12. Use a dedicated tool

One downside to using Windows’ own Restore point is that while it creates an exact image of your PC’s files from any given moment, you may make a copy of data that may already be faulty or damaged.

Additionally, creating a restore point needs to be scheduled beforehand or done manually.

The last major downside of traditional restore points is that they are used for restoring registry hives instead of actual files. 

Given the downsides, using a reliable third-party tool suddenly becomes the better option, and few software tools are as good as Fortect.

First of all, it is fully automated, so no scheduling or manual input is required. You can check out our dedicated guide that gives you in-depth information about Fortect PC optimizer.

Also, it fixes registry keys and files using its own repositories before creating its restore points, so you always know that whatever restore point you choose during a rollback will always be fully functional.

⇒ Get Fortect

What do I do if Restore point is not working on Windows 11?

Here are a few additional tips apart from the ones mentioned above that will help you resolve if the restore point isn’t working on Windows 11.

Use the CHKDSK tool.

Enable Shadow Copy services.

Disable your antivirus or antimalware tool.

Reset your PC.

Perform a clean install.

Can Restore Point recover deleted files?

When you create a Restore Point on your PC, you take a snapshot of system files, system settings, installed programs, and Windows registry.

This does not include any of your files, such as documents, photos, videos, etc. So, the restore point only restores system-related changes and cannot be used to recover deleted files.

Still experiencing issues?

Was this page helpful?

x

Update the detailed information about How To Locate The System Image Tool In Windows 8.1 on the Kientrucdochoi.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!