Trending December 2023 # Malwarebytes Blue Screen: Use These 4 Solutions To Fix It # Suggested January 2024 # Top 13 Popular

You are reading the article Malwarebytes Blue Screen: Use These 4 Solutions To Fix It updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Malwarebytes Blue Screen: Use These 4 Solutions To Fix It

Malwarebytes Blue Screen: Use These 4 Solutions to Fix it




Malwarebytes is one of the most popular antivirus tools on earth.

Unfortunately, many users reported BSoD errors and system crashes when using it.

Some said that reinstalling the antivirus tool did the trick for them.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

While incremental security application updates help improve performance, some users still experience several issues, including occasional crashes and blue screens of death.

We will cover that in the article, explaining in great detail what you can do to stop BSoDs caused by running Malwarebytes.

Why is Malwarebytes causing a blue screen?

There can be various reasons why Malwarebytes can cause a blue screen (also known as the “blue screen of death” or BSOD) error on your Windows PC. Some common reasons include the following:

Compatibility issues – If you’re running an older version of Malwarebytes on an outdated version of Windows, it may not be compatible with your system and cause a BSOD error.

Conflicts with other software – Malwarebytes can sometimes conflict with other security software or drivers installed on your system, causing a BSOD error.

Corrupted or outdated drivers – Outdated or corrupted drivers can cause a BSOD error, and Malwarebytes may identify these drivers during a scan and trigger a BSOD error.

Malware or virus infections – Malwarebytes is designed to detect and remove malware and viruses from your system. However, it may cause a BSOD error if it encounters hazardous malware.

We will now explore some of the top recommended solutions.

How can I fix Malwarebyte’s blue screen?

Before you jump into the recommended solutions, consider using another antivirus software. There are many good options, and you may be able to avoid this issue.

You should consider the most reliable antivirus tools on Windows 10 and enhance your security without causing system errors.

1. Reinstall Malwarebytes 2. Turn off Fast Startup 3. Disable any other conflicting antivirus

While Malwarebytes is a complete security solution, some users prefer installing it with other antivirus tools, such as Bitdefender. Still, the problem is that having two antivirus tools can lead to issues.

Many users suggested disabling web filtering in Bitdefender.

Another similar solution would be to disable Web Protection in Malwarebytes since that may also help.

4. Run a third-party BSoD troubleshooter

BSoDs and crashes can be caused by many things, ranging from hardware incompatibilities to software inconsistencies, which makes identifying the problem complicated and time-consuming.

That’s precisely why third-party software solutions are becoming more and more of an acceptable alternative since they run your PC through a complete set of troubleshooting steps with minimal user input.

Moreover, this system repair tool will run a 5-minute free scan and detect the Windows errors caused by other programs or applications on your system.

Thus, you can remove the specified corrupted or malfunctioning software files that determine such BSoD issues. The process is mainly automated, so the job is finished within a few minutes.

⇒ Get Fortect

This pretty much wraps up our troubleshooting guide covering BSoDs triggered when running Malwarebytes.

Let us know which solution you went for by leaving us your feedback below.

Still experiencing issues?

Was this page helpful?


Start a conversation

You're reading Malwarebytes Blue Screen: Use These 4 Solutions To Fix It

Fix No_User_Mode_Context Blue Screen Of Death On Windows

The NO USER MODE CONTEXT, 0x0000000E stop error can occur when a program is trying to leverage the use of a system driver but fails to do so. Some of the causes of NO USER MODE CONTEXT bluescreen of death error are corrupted or incompatible drivers, incorrectly configured Windows Registry entries, Malware infection, damaged memory locations, etc. This Stop Error occurs infrequently and indicates that an attempt to enter user mode with no context was made.


If this is the first time you have restarted after installing additional hardware, remove the hardware and restart again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with your OS. If that does not help, then the following potential fixes will be carried out to fix NO_USER_CONTEXT stop error on Windows 10-

Update, Rollback or Disable certain Drivers.

Run System File Checker.

Use Windows Memory Diagnostics

If you tend to create a System Restore point usually, you can try to undo any modifications on your computer, by performing System Restore. It is also recommended that you carry out the tasks mentioned below in Safe Mode.

1] Update, Rollback or Disable select Drivers

The best practice for you should be to go to the website of your manufacturers like NVIDIA, AMD or Intel. Go to the section called Drivers and download the latest definitions from there.

After the download has been completed, just install the graphics driver and reboot your computer.

Alternatively, after booting into the Safe Mode, open Device Manager.

The main drivers that might be a cause for this Blue Screen will be listed under the section of Display Adapters inside of the Device Manager. So if you recently updated these drivers, roll back and see. If you did not, then we suggest you update these drivers.

2] Run System File Checker sfc /scannow

Restart your system after the scan is completed.

3] Use Windows Memory Diagnostics

In order to fix any issues with your RAM, follow the following steps.

Run the Memory Check on your computer. Start by hitting the WINKEY + R button combination to launch the Run utility. Then type in, chúng tôi and then hit Enter. It will launch the Windows Memory Diagnostic Tool and will give out two options-

Restart now and check for problems (Recommended)

Check for problems the next time I start my computer

Now, according to the option selected by you, the computer will restart and check for memory-based problems. If you get any issues there, it will fix it automatically else if no issues are detected, this is probably not the cause of the issue.

Can a PC blue screen for no reason?

A Blue Screen occurs due to hardware or software issues. You will no longer see a blue screen until Windows detects a critical hardware or software fault on your system. A BSOD can be an indication of damage to a hardware or a hardware component, like RAM, hard disk, etc. In some cases, BSOD can also occur due to a corrupted device driver.

Can a blue screen fix itself?

Hardware and software issues are responsible for a blue screen on Windows computers. When a blue screen occurs, your computer displays an error message and restarts automatically. If there is a serious hardware issue, the blue screen keeps occurring. A BSOD error cannot be fixed by itself. You have to troubleshoot the BSOD error to resolve the issue. To troubleshoot the BSOD error, you can view the BSOD log file created by Windows.

Fix Fat File System (Fastfat.sys) Blue Screen On Windows 11/10

You may see FAT FILE SYSTEM Blue Screen because of many different reasons such as faulty Hardware, bad sectors in Hard Drive, etc. The main cause is disk corruption in the file system or bad blocks (sectors). Corrupted SCSI and IDE drivers can also cause the error.

In this article, we are going to fix the FAT FILE SYSTEM (fastfat.sys) 0x00000023 Blue Screen on Windows 11/10 with the help of some simple solutions. chúng tôi is a Windows operating system driver file.

The FAT_FILE_SYSTEM bug check has a value of 0x00000023. This indicates that a problem occurred in the FAT file system.

Fix FAT FILE SYSTEM (fastfat.sys) Blue Screen

These are the things you can do to fix FAT FILE SYSTEM (fastfat.sys) Blue Screen on Windows 11/10.


Run Verifier to find Driver Problem

Update drivers using Optional Updates

Repair Windows 10 using Installation Media

Check the Hardware for fault.

Let us talk about them in detail.

You will need to use the Command Prompt. If you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.


As mentioned earlier, the problem can be because of a bad sector in the hard drive. So, to fix it, you have to run the CHKDSK command.

However, before running the command, boot your computer in Clean Boot State or Advanced Option using the Installation Media. Now, open the Command Prompt as an admin in either of the two and run the following command.

chkdsk /f /r

You will be asked to confirm your action, so, hit “Y” to do that.

Finally, boot your computer in a normal state and check if the issue persists.

2] Run Verifier to find Drive Problem

One of the things you can do to fix the error is to run Driver Verifier to find if there’s a problem with the installed drivers.

So, open Command Prompt as an administrator and run the following command.


Now, wait for the process to complete and your problem will hopefully be resolved.

3] Update drivers using Optional Updates 4] Repair Windows using the installation Media

Another thing you can do to fix the error is to repair your OS with Installation Media. This will fix your OS without deleting any personal files.

5] Check the Hardware for fault

Now this one is meant for hardware experts – so if you are not one, we suggest you consult a hardware technician.

You need to is to check if the error is because of a fault in the Hardware. The chances are that it could be your Hard Disk!

For that, you have to disassemble your PC and then add the component one by one to see which device is faulty.

Remove all the USB ports, external drives, and SD Cards and keep checking for fault.

If you have multiple RAMs, unplug them and plug them one by one to see if one of them has malfunctioned.

Remove one of the SSDs and HDDs, if you have multiple ones, and check for fault.

Hard Drives are usually responsible for these errors, so, pay close attention to this one.

Remove Graphic Card, expect the Integrated one.

Now, start adding the components one by one to recheck if the error is because of them. This may take a while but do not skip a single step.

If you know the reason for the fault, replace that device and you will be good to go.

Related: Fix Windows Stop Errors or Blue Screen of Death.

Is Your Ssd Dead? Try These 5 Solutions To Get It Working

Is Your SSD Dead? Try These 5 Solutions to Get It Working A few quick solutions to save valuable data on the SSD




Most users generally replace a dead SSD, but that’s not the right approach since it can be fixed.

To fix it, run the Check Disk utility, install the latest firmware and drivers, or update the BIOS.

If it comes to worst, you can always recover the data from the SSD before discarding it.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

When the SSD is not recognized or is simply dead, you don’t just lose precious data but will also have to shell out quite a few bucks for a replacement drive.

Most usually go with the latter without much thought. But what if you can get the SSD working? Read ahead to find out.

What are the symptoms of drive failure?

While the SSD (Solid State Drive) and HDD (Hard Disk Drive) are completely different in storing data, a common aspect is that both fail sooner or later. Though the former has a considerably longer life span.

An SSD can last 10 years or more, while an HDD usually wears out after 4-6 years. The reason, SSDs have no moving parts, as opposed to HDDs.

But it’s imperative that you identify the signs of a failing SSD before it’s completely dead for several reasons. Here are a few things to look out for:

Get errors while reading or writing files: When a drive is about to fail, it will throw errors when accessing or saving files to certain locations.

Computer slows down: A slow computer could be a sign of a falling SSD, though remember, that’s not the only reason.

Issues booting the PC: If you are unable to boot Windows and get an error frequently, chances are the SSD is to blame.

Applications start to crash: In many cases, the applications crash when the SSD is dead, and you need to fix things to run them again.

How do I fix a dead SSD drive?

Before we head to the complex solutions, try these:

Make sure the connections are in order. Remove the SATA cable from the SSD and then plug it back in just to be sure.

Unplug other non-critical peripherals from the PC, and then connect the SSD.

Plug the SSD into another computer to verify whether it’s dead or the previous PC couldn’t read it. If it’s the latter, replace the cable and check the ports. For the former, the other solutions here will help.

Update the BIOS since it could an issue there that’s giving the impression that the SSD is dead.

If you can’t figure things out, move to the next fixes.


The solutions here are for an SSD that has gone dead over the course of time and is not damaged in any way. If it’s the latter, we recommend you take it to a repair center immediately.

1. Keep the SSD in an idle state

Turn off the PC, and unplug the data cable from the SSD but leave the SATA power cable connected.

Turn on the PC, enter the BIOS, and let it sit idly for 30 minutes or so. Do not use the computer during this period.

Now, turn off the computer, disconnect the drive, and wait for 30 seconds.

Again, connect the drive using the SATA power cable, turn on the computer, and wait for 30 minutes.

Repeat the process 2-3 times, then connect the drive normally, and it should show up.

Expert tip:

2. Reset the BIOS


The steps to reset the BIOS are different for every manufacturer, and the process listed below is only to provide an understanding of the concept. We recommend you look through the manufacturer’s website for the exact steps.

Power off the computer, turn it on, and repeatedly hit the relevant key (depending on the manufacturer) to enter the BIOS. It’s usually F1, F2, F10, F12, or Del.

Once in the BIOS, navigate through the various tabs and look for an option that says Load Optimal Defaults, Load Setup Defaults, Load Default Options, or something similar, and select it.

Confirm the reset, and wait for the process to complete.

Once done, turn on the computer, and it should recognize the SSD.

Oftentimes, an issue with the BIOS makes us think that the SSD is dead, and resetting it helps fix things in no time.

After downloading and installing the firmware update, check if it can fix the dead SSD. For many users, it did the trick, and we recommend you update the SSD firmware.

Updating drivers is critical for the effective functioning of every device, including the SSD. So, make sure you have the latest ones. If Windows doesn’t find an update, you can always manually install the latest drivers, though it’s more time-consuming.

Alternatively, you can use dedicated updater software such as Outbyte Driver Updater that automatically scans your PC for outdated drivers and install the corresponding version for your hardware.

5. Run the Check Disk utility

That’s it! One of the solutions presented here should have helped you fix the dead SSD drive. In case the problem persists, we recommend you get in touch with the official manufacturer or a local technician to get the hardware inspected.

Also, if there are critical files on the drive that you would like to salvage, check the best data recovery tools to retrieve them.

Was this page helpful?


Unlock With Apple Watch Not Working? 15 Solutions To Fix It

Your Apple Watch can automatically unlock your iPhone, which removes the need to enter the iPhone passcode or use Face ID. However, if Apple Watch is not unlocking iPhone, you see errors like “Unable to Communicate with Apple Watch,” or you’ll stay stuck on the iPhone passcode screen for a few seconds.

This guide lists 15 solutions to fix the issue of Unlock with Apple Watch not working between your watch and iPhone.

1. Compatible devices and software versions

You can unlock your iPhone with your Apple Watch if you have:

An iPhone with Face ID running iOS 14.5 or later. This means iPhones with Touch ID Home button aren’t supported.

An Apple Watch Series 3 or later running watchOS 7.4 or later.

Pro Tip: On iPhone 12 or later, you can ignore Unlock with Apple Watch and set up your iPhone to unlock with Face ID even when wearing a mask!

iPhone 13 running iOS 15 have a bug where Apple Watch would fail to unlock the device and show an error saying “Unable to Communicate with Apple Watch.” Apple acknowledged the problem and fixed it in iOS 15.0.1.

3. Unlock iPhone with Apple Watch works only with mask or sunglasses

Your Apple Watch can unlock your Mac anytime. However, for Apple Watch to unlock your iPhone, your mouth and nose must be obstructed with something like a mask, or your eyes must be blocked by sunglasses or a similar thing like ski goggles. So, if you hope your Apple Watch to unlock your iPhone kept on a table (away from your face), it won’t work.

4. Make sure you’re wearing your unlocked Apple Watch

You must wear the Apple Watch on your wrist. It can’t be left on a table. Then only your iPhone will auto-unlock with the Apple Watch.

Next, do you see a tiny lock icon on the top of the Apple Watch screen? If yes, that means your Apple Watch is locked by a passcode. Simply press the Digital Crown and enter your Apple Watch passcode to unlock it. Now, Unlock with Apple Watch should work successfully.

Note: Apple Watch locks itself automatically when you take it off your wrist. You’ll have to enter the passcode once again after wearing it.

5. Enable Wi-Fi and Bluetooth on both devices

When Wi-Fi and Bluetooth are enabled on both devices, your Apple Watch can unlock your iPhone by establishing a secure connection. Thus, if your iPhone fails to unlock via the Apple Watch, go to iPhone Settings or Control Center and enable Wi-Fi and Bluetooth. It’s ok if iPhone isn’t connected to any Wi-Fi network or you tap the Wi-Fi icon in the Control Center to stop it from searching for new networks (i.e., the blue Wi-Fi icon becomes white).

Follow these steps to check Wi-Fi and Bluetooth settings on your Apple Watch:

Press the Digital Crown to see all apps and tap Settings.

Tap Wi-Fi and make sure it’s on.

Go back and tap Bluetooth and ensure it’s on.

6. Connect your iPhone and Apple Watch

Once you enable Bluetooth (and Wi-Fi) on your iPhone and Apple Watch, they connect automatically. To check, swipe up from the bottom of the Apple Watch screen to open its Control Center. Here if you see a tiny green iPhone icon, that means your Apple Watch is connected to your iPhone. If you see a red iPhone icon, double-check Wi-Fi and Bluetooth. Turning them off and back on will also help.

Must read: How to know whether your Apple Watch is connected to the internet or not

7. You’ll have to enter the passcode once

Your iPhone will ask you to manually enter the iPhone passcode after restarting it or unlocking the Apple Watch. Once you enter the passcode, Unlock with Apple Watch will work for all future unlocking attempts.

8. Enable and disable Airplane Mode

Turning on and off Airplane Mode disconnects radio signals like Wi-Fi and Bluetooth. This little trick refreshes the wireless protocols, usually fixing communication problems.

On iPhone:

Open Control Center by swiping down from the top right of the screen where the battery icon is.

Tap the airplane icon, and it’ll turn yellow.

After waiting for 15 seconds, tap the same icon to turn off Airplane Mode.

On Apple Watch:

Swipe up from the bottom of the watch face to open Control Center.

Tap the airplane icon, and it’ll turn yellow.

After 15 seconds, tap the same icon to turn off Airplane Mode.

9. Restart both devices

If you haven’t restarted your iPhone or Apple Watch in a long time, temporary glitches may cause such inconveniences. To fix this, turn off both devices, wait for a minute, and turn them back on. After that, manually enter the passcode once on your iPhone and Apple Watch. Your Apple Watch should unlock your iPhone automatically from now on.

10. Disable and re-enable Unlock with Apple Watch

If your Apple Watch isn’t unlocking your iPhone even after fulfilling the above requirements, follow these steps to turn off this feature and turn it back on.

Here’s how to fix iPhone not unlocking with Apple Watch:

Open iPhone Settings and tap Face ID & Passcode.

Turn off Unlock with Apple Watch.

Restart your iPhone.

Go to iPhone Settings, tap Face ID & Passcode, and enable Unlock with Apple Watch once again.

11. Turn on passcode and wrist detection on Apple Watch

Your Apple Watch can unlock your iPhone only when you have set up a passcode on it and enabled wrist detection. The following steps will help confirm that:

Open the Watch app on your iPhone and tap Passcode from the My Watch section.

In case you have not set up a passcode, tap Turn Passcode On and do that.

If it says Turn Passcode Off and Change Passcode, that means you have already fulfilled the condition. From the bottom, also make sure Wrist Detection is enabled. After that, tap Turn Passcode Off and enter the passcode on your Apple Watch to disable it. Next, tap Turn Passcode On and set it up again.

Tip: Some users have found success by turning off Unlock with iPhone.

Related: Unable to install update on Apple Watch? Here’s how to fix it

13. Reset iPhone Face ID

Here’s how to do that:

Open iPhone Settings and tap Face ID & Passcode.

Tap Reset Face ID.

Related: Setting up an alternate appearance using Face ID

14. Reset iPhone network settings

Apple Watch communicates with your iPhone via Wi-Fi and Bluetooth to unlock it. If none of the above solutions fix the issue, reset your iPhone network settings.

15. Unpair and re-pair your Apple Watch

Are things still not in order? Unpair your Apple Watch and pair it again. This will make a backup of your Apple Watch and then erase it. After that, set up your Apple Watch again, and it should fix the ongoing issues related to unlocking your iPhone.

Check out next:

Windows 11 Screen Keeps Refreshing? Fix It In

Windows 11 Screen Keeps Refreshing? Fix It in [8 Steps] Check if the refresh rate matches the capabilities of your monitor




The Windows 11 keeps refreshing issue occurs due to outdated drivers, corrupted system files, or malware infection.

To fix it, update graphics drivers, disable dynamic refresh rate, run SFC & DISM scan, or scan your PC for malware.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

If you’ve been struggling with a screen that keeps refreshing on your Windows 11, interrupting your workflow, and causing annoyance, this guide can help!

We will discuss the root causes of the problem and provide you with a simple yet effective solution to overcome this issue.

Why does the Windows 11 screen keep refreshing?

There could be several factors that can contribute to the issue of a Windows 11 screen constantly refreshing. Here are some common reasons:

Now that you know the probable causes, let us move to the troubleshooting methods to fix it accordingly.

What can I do if Windows 11 screen keeps refreshing?

Turn off the PC, disconnect the monitor from the PC, and turn it off, wait a few seconds, then reconnect it and turn everything back on.

Make sure your system specifications meet the Windows 11 requirements.

Uninstall any recently installed software.

Check for all the connections and cables to ensure no cable is loosely connected.

Check Task Scheduler for recurring tasks.

Ensure there are no pending Windows updates.

Disable any background apps.

Once you have gone through these, let us check out the detailed solutions.

1. Restart Windows File Explorer

If also the Taskbar is missing, it’s a clear sign that this issue is related to File Explorer, and restarting it should also fix the screen refreshing problem.

2. Run SFC & DISM scans

On the other hand, if you’re not sure about proceeding with the manual steps, we suggest you try a specialized repair app.

3. Disable the related services

You can also opt for an automatic driver updater to detect all outdated or malfunctioning drivers and select the latest updates within minutes.

⇒ Get Outbyte Driver Updater

5. Restart your computer in Safe Mode

Now when your PC boots into safe mode, you can narrow down the reason for the issue so that you can fix the screen keeps refreshing problem.

6. Delete the icon and thumbnail cache

Close the Command Prompt window.

7. Modify your desktop settings

It would also help to check if the monitor refresh rate matches the performance of your monitor. Windows 11 also has a Dynamic Refresh Rate option that you can try to toggle on and off to see if it fixes the issue.

8. Tweak the Power Plan

By following the steps outlined here, you can troubleshoot and fix the problem of your Windows 11 screen repeatedly refreshing. If these steps didn’t work for you, you might have to perform a clean installation of Windows to fix it.

If you are facing similar issues, like the desktop keeps refreshing on Windows 10, we recommend you check out this informative guide to find easy solutions.

Still experiencing issues?

Was this page helpful?


Start a conversation

Update the detailed information about Malwarebytes Blue Screen: Use These 4 Solutions To Fix It on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!